A system's natural frequency is determined by its physical properties and boundary conditions. It describes a frequency of free oscillation when the system is disturbed and allowed to respond without continuous external driving. Resonant frequency refers to a frequency at which the response to an external periodic excitation is large. In an ideal undamped system, the resonant frequency may coincide with the natural frequency. In damped systems, the frequency of maximum response can differ from the undamped natural frequency, depending on the system and the measured response quantity. Acoustic cavities, air columns and resonators can support several natural modes rather than only one frequency.
Natural Frequency and Resonant Frequency
Natural frequency is a frequency at which a system can oscillate freely, while resonant frequency is a frequency at which its driven response is especially strong.
fₙ = ωₙ/(2π)
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
fₙ | Natural frequency | Hz |
ωₙ | Natural angular frequency | rad/s |
Example or application
An acoustic cavity may have a natural mode at 500 Hz. Driving it near the corresponding resonant frequency can produce a strong acoustic response, although damping may shift the exact frequency of maximum response.
Key Points
Natural frequency is associated with free oscillation.
Resonant frequency is associated with a strong driven response.
The two frequencies coincide in some ideal systems.
Damping can change the frequency of maximum response.
Acoustic systems can have multiple modes.
Applications
Acoustic cavity design
Musical instrument tuning
Resonator engineering
Room mode analysis
Acoustic sensor design
Common Mistakes
Treating natural frequency and resonant frequency as always identical.
Assuming an acoustic cavity has only one natural mode.
Ignoring damping when predicting the driven response.
Learning Outcomes
Define natural frequency and resonant frequency.
Explain the difference between free and driven oscillations.
Relate angular frequency to frequency in hertz.
Describe how damping can affect resonance.
Practice Questions
| Question | Answer |
|---|---|
What determines the natural frequencies of an acoustic system? | Its physical properties, geometry and boundary conditions. |
When can natural and resonant frequencies differ? | In damped systems, depending on the response being considered. |
How is angular natural frequency converted to hertz? | Divide it by 2π. |
Related Concepts
Resonance in Sound Waves
Acoustic Resonators
Helmholtz Resonator
Standing Waves in Air Columns
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Fundamentals of Acoustics — Lawrence E. Kinsler et al.
- The Physics of Sound — Richard E. Berg and David G. Stork