✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-092

Doppler Effect for a Moving Source

A moving sound source changes the spacing of the wavefronts it emits, causing a stationary observer to detect a shifted frequency.

f′ = fv/(v ∓ v_s)

Explanation

When a sound source moves through a stationary medium, each new wavefront is emitted from a different source position. In the direction of motion, successive wavefronts are closer together, so the wavelength decreases and a stationary observer in front of the source detects a higher frequency. Behind the source, the wavefronts are farther apart and the observed frequency is lower. For a stationary observer, the denominator uses v − v_s when the source approaches and v + v_s when it recedes. This expression assumes the source speed is below the speed of sound and the medium is stationary relative to the observer.

Variables

SymbolMeaningUnit

f′

Observed frequency

Hz

f

Frequency emitted by the source

Hz

v

Speed of sound in the stationary medium

m/s

v_s

Source speed toward or away from the observer

m/s

Example or application

A source emits a 500 Hz tone and approaches a stationary observer at 20 m/s. Taking the speed of sound as 343 m/s, the observed frequency is approximately 500 × 343/(343 − 20) = 531 Hz.

Key Points

  • Source motion changes the spacing of emitted wavefronts.

  • Approach produces a shorter wavelength in front of the source.

  • Recession produces a longer wavelength behind the source.

  • The emitted frequency remains unchanged in the source's own frame.

  • The standard subsonic formula assumes a stationary propagation medium.

Applications

  • Analysis of moving sirens

  • Vehicle sound studies

  • Acoustic motion experiments

  • Doppler-effect demonstrations

  • Sound-source tracking

Common Mistakes

  • Using the approaching-source denominator for a receding source.

  • Changing the emitted frequency instead of calculating the observed frequency.

  • Using the formula without checking the assumed medium and subsonic conditions.

Learning Outcomes

  • Explain how source motion changes wavelength.

  • Select the correct sign for approaching and receding motion.

  • Calculate observed frequency for a moving source.

  • State the assumptions of the standard formula.

Practice Questions

QuestionAnswer

What happens to wavefront spacing in front of an approaching source?

It decreases.

A 400 Hz source approaches at 10 m/s. If v = 340 m/s, what frequency is observed by a stationary listener?

Approximately 412 Hz.

Which denominator is used for a receding source?

v + v_s.

Related Concepts

  • Introduction to the Doppler Effect

  • Doppler Effect for a Moving Observer

  • Doppler Shift in Sound Waves

  • Mach Number and Supersonic Motion

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • OpenStax University Physics, Volume 1 — Sound
  • Fundamentals of Acoustics — Lawrence E. Kinsler et al.

Suggest a correction or source · More in Acoustics