✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-137

Classification of Noise

Noise can be classified according to its time pattern, frequency content, source, intensity and physical characteristics.

L_eq = 10 log₁₀[(1/T)∫₀ᵀ 10^(L(t)/10) dt]

Explanation

Noise classification helps describe sound environments and select appropriate measurement and control methods. According to time pattern, noise may be continuous, intermittent, fluctuating or impulsive. According to frequency content, it may be broadband, narrowband or tonal. Noise can also be classified by source, such as transportation, industrial, construction or community noise. These categories are not mutually exclusive: one sound can belong to several classifications at the same time. For example, a machine may produce continuous tonal noise, while a passing vehicle may produce fluctuating broadband noise.

Variables

SymbolMeaning

L_eq

Equivalent continuous sound level over the measurement period, measured in decibels (dB).

T

Total measurement duration, measured in seconds.

L(t)

Time-varying sound level, expressed in decibels.

t

Time during the measurement period.

Example or application

A factory ventilation fan may produce continuous narrowband noise, whereas nearby road traffic may produce fluctuating broadband noise.

Key Points

  • Noise can be classified by time pattern and frequency content.

  • Source-based classifications include industrial, traffic and community noise.

  • Continuous noise persists relatively steadily.

  • Intermittent noise occurs in separate periods.

  • Impulsive noise contains short-duration events.

  • A single noise can belong to multiple categories.

Applications

  • Selecting suitable noise measurement methods.

  • Identifying workplace noise hazards.

  • Environmental noise surveys.

  • Designing noise-control systems.

  • Comparing different industrial and community sound environments.

Common Mistakes

  • Assuming that noise classifications are mutually exclusive.

  • Confusing broadband noise with fluctuating noise.

  • Classifying noise only by loudness.

  • Treating all intermittent sounds as impulsive noise.

Learning Outcomes

  • Identify major ways of classifying noise.

  • Distinguish time-based and frequency-based classifications.

  • Give examples of different noise categories.

  • Explain why noise classification helps in acoustic assessment.

Practice Questions

QuestionAnswer

Name three classifications of noise based on time pattern.

Continuous, intermittent and impulsive noise.

What is the difference between broadband and narrowband noise?

Broadband noise contains energy across a wide frequency range, while narrowband noise is concentrated in a relatively limited frequency range.

Can one sound belong to more than one noise category?

Yes. A sound can be classified by its timing, frequency content and source.

Related Concepts

  • Continuous Noise

  • Intermittent Noise

  • Impulsive Noise

  • Broadband Noise

  • Narrowband Noise

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Fundamentals of Acoustics by Lawrence E. Kinsler and colleagues; Engineering Noise Control by David A. Bies and Colin H. Hansen.

Suggest a correction or source · More in Acoustics