✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-139

Impulsive Noise

Impulsive noise consists of short-duration sound events that rise rapidly to a high level and may contain substantial acoustic energy over a brief period.

L_Cpeak = 20 log₁₀(p_Cpeak/p₀)

Explanation

Impulsive noise is produced by brief events such as hammer strikes, metal impacts, explosions and some industrial operations. It is characterized by a rapid increase in sound pressure followed by a relatively short decay. Some impulsive events contain a single prominent peak, while others occur as repeated impulses. Peak sound pressure level and suitable time-weighted or event-based measurements may be needed to characterize these sounds. Impulsive noise can be important in occupational and environmental assessments because a short event may have a high peak level even when its contribution to a long-term average is limited.

Variables

SymbolMeaning

L_Cpeak

C-weighted peak sound pressure level, measured in decibels (dB).

p_Cpeak

Maximum absolute C-weighted instantaneous sound pressure under the applicable measurement convention, measured in pascals (Pa).

p₀

Reference sound pressure in air, equal to 20 μPa.

Example or application

A metal sheet dropped onto a hard factory floor can produce a brief impulsive sound with a high peak level, even though the event lasts only a short time.

Key Points

  • Impulsive noise consists of short-duration sound events.

  • It often has a rapid rise and short decay.

  • Impulses may occur singly or repeatedly.

  • Peak measurements can be important for characterizing impulsive sound.

  • Long-term average levels alone may not describe every impulsive hazard.

Applications

  • Assessing industrial impact noise.

  • Monitoring construction and demolition activities.

  • Evaluating firearm and explosive impulse noise in controlled professional settings.

  • Testing machinery that produces repeated impacts.

  • Occupational noise-risk assessment.

Common Mistakes

  • Assuming a short sound event cannot create a significant exposure concern.

  • Using only an average sound level to describe a strong impulse.

  • Confusing intermittent noise with impulsive noise.

  • Ignoring the measurement time response and frequency weighting.

Learning Outcomes

  • Define impulsive noise.

  • Describe its typical time pattern.

  • Explain why peak sound pressure measurements may be needed.

  • Distinguish impulsive noise from continuous and intermittent noise.

Practice Questions

QuestionAnswer

What is impulsive noise?

A short-duration sound event that typically rises rapidly to a peak and then decays.

Why can peak sound pressure level be useful for impulsive noise?

It captures the maximum pressure of a brief event that may be obscured by long-term averaging.

Give one example of impulsive noise.

A hammer striking a metal surface.

Related Concepts

  • Noise Classification

  • Peak Sound Pressure Level

  • Occupational Noise

  • Industrial Noise

  • Noise Measurement

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • ISO 1999, Acoustics—Estimation of Noise-Induced Hearing Loss; Engineering Noise Control by David A. Bies and Colin H. Hansen.

Suggest a correction or source · More in Acoustics