✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-156

Ultrasonic Detection and Measurement

Ultrasonic detection and measurement use transmitted and received sound waves to determine distance, thickness, position, motion or material properties.

d = vt/2

Explanation

A fuller explanation is being developed. Verify this concept with cited sources before relying on it.

Variables

SymbolMeaning

d

Distance from the transducer to the reflecting boundary, measured in metres (m).

v

Speed of ultrasound in the propagation medium, measured in metres per second (m/s).

t

Round-trip travel time of the transmitted pulse and returning echo, measured in seconds (s).

Example or application

If an ultrasonic sensor sends a pulse through air and receives an echo after 0.020 s, using a sound speed of 343 m/s gives a target distance of 3.43 m.

Text

Ultrasonic measurement systems transmit a sound pulse and analyze the returning echo or the signal received by a separate sensor. In pulse-echo systems, the time between transmission and reception can be used to estimate the distance to a reflecting boundary when the sound speed is known. Through-transmission systems use a transmitter on one side of a material and a receiver on the other, allowing changes in transmitted amplitude or travel time to reveal information about the material. Ultrasonic sensors can also measure fluid level, object presence and movement. Accuracy depends on sound-speed calibration, temperature, alignment, surface condition, attenuation and the timing resolution of the electronics.

Key Points

  • Pulse-echo measurement uses the time delay of a returning signal.

  • The factor of two accounts for travel to the target and back.

  • Through-transmission systems use separate transmitting and receiving positions.

  • Accurate measurement requires a suitable sound-speed value.

  • Temperature, alignment and surface properties can affect results.

Applications

  • Distance and proximity sensors.

  • Liquid-level measurement.

  • Industrial thickness gauges.

  • Object detection and positioning.

  • Flow and motion measurement.

Common Mistakes

  • Forgetting the round-trip factor of two in pulse-echo distance calculations.

  • Using the speed of sound in air for a measurement made in another material.

  • Ignoring temperature-related changes in sound speed.

  • Assuming every surface reflects ultrasound strongly enough for reliable detection.

Learning Outcomes

  • Explain pulse-echo and through-transmission measurement.

  • Calculate distance from ultrasonic travel time when the medium and sound speed are known.

  • Identify factors that influence measurement accuracy.

  • Describe common industrial and sensing applications.

Practice Questions

QuestionAnswer

Why is round-trip time divided by two in pulse-echo ranging?

Because the pulse travels to the target and then returns to the transducer.

What information is required to calculate distance from echo time?

The sound speed in the medium and the measured round-trip travel time.

Name one application of ultrasonic measurement.

Liquid-level measurement in a tank.

Related Concepts

  • Ultrasonic Transducer

  • Pulse-Echo Method

  • Time of Flight

  • Sound Speed

  • Ultrasonic Testing

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Ultrasonic Testing by Krautkramer and Krautkramer; Diagnostic Ultrasound: Physics and Equipment by Peter Hoskins and colleagues.

Suggest a correction or source · More in Acoustics