A fuller explanation is being developed. Verify this concept with cited sources before relying on it.
Types of Loudspeakers
Loudspeakers are classified by their transducer design, frequency range, radiation method and intended audio application.
f_c = 1/(2πRC)
Explanation
Variables
| Symbol | Meaning |
|---|---|
f_c | Cutoff frequency of an ideal first-order RC filter, measured in hertz (Hz). |
R | Resistance in the filter circuit, measured in ohms (Ω). |
C | Capacitance in the filter circuit, measured in farads (F). |
Example or application
A home theatre speaker system may use a subwoofer for deep bass, woofers and midrange drivers for lower and middle frequencies, and tweeters for high-frequency details.
Text
Loudspeakers use different mechanisms to convert electrical signals into sound. Moving-coil speakers use a voice coil and magnetic field and are widely used in home and professional audio. Electrostatic speakers use electrostatic forces acting on a thin diaphragm. Planar magnetic speakers use conductors attached to a lightweight diaphragm within a magnetic field. Horn loudspeakers use a horn structure to improve acoustic coupling between the driver and the surrounding air, often increasing sensitivity and controlling directivity. Piezoelectric speakers use electrically induced deformation of a piezoelectric material. Loudspeaker systems are also classified by frequency role: woofers reproduce lower frequencies, midrange drivers cover middle frequencies, and tweeters reproduce high frequencies. Subwoofers are designed for very low-frequency reproduction. A multiway system combines drivers through a crossover network.
Key Points
Moving-coil speakers are common in consumer and professional audio.
Electrostatic and planar magnetic designs use different diaphragm-driving mechanisms.
Horn designs can improve sensitivity and control sound direction.
Woofers, midrange drivers and tweeters serve different frequency ranges.
Subwoofers are designed for low-frequency reproduction.
Crossover networks divide the audio signal among different drivers.
Applications
Home stereo and theatre systems.
Professional concert sound reinforcement.
Headphones and portable audio devices.
Public-address and announcement systems.
Specialized high-sensitivity and directional sound systems.
Common Mistakes
Assuming every loudspeaker uses a moving coil.
Treating woofer, tweeter and subwoofer as transducer mechanisms rather than frequency roles.
Assuming a crossover creates new audio information.
Ignoring driver overlap and crossover behavior when evaluating a multiway system.
Learning Outcomes
Identify common loudspeaker designs.
Compare moving-coil, electrostatic, planar magnetic and horn systems.
Distinguish drivers by their frequency roles.
Explain why crossover networks are used.
Practice Questions
| Question | Answer |
|---|---|
What is the function of a tweeter? | To reproduce high-frequency sound. |
How does an electrostatic loudspeaker produce diaphragm motion? | Electrostatic forces act on a charged diaphragm between electrodes. |
Why are crossover networks used in multiway speakers? | They direct suitable frequency ranges to the drivers designed to reproduce them. |
Related Concepts
Loudspeaker Design
Subwoofers
Tweeters
Crossover Networks
Frequency Response
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Loudspeaker and Headphone Handbook by John Borwick; Sound Reproduction by Floyd E. Toole.