✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-173

Frequency Response of Audio Systems

Frequency response describes how an audio system's output changes with the frequency of its input signal.

G_{dB} = 20 log₁₀(|V_out/V_in|)

Explanation

A fuller explanation is being developed. Verify this concept with cited sources before relying on it.

Variables

SymbolMeaning

G_{dB}

Voltage gain expressed in decibels (dB), for comparable input and output impedance conditions.

V_out

Output voltage amplitude, measured in volts (V).

V_in

Input voltage amplitude, measured in volts (V).

Example or application

If a speaker produces much lower output at very low frequencies than in the middle of its operating range, its frequency-response graph will show a reduction in the bass region.

Text

Frequency response describes the way a microphone, amplifier, loudspeaker or complete audio system responds to different frequencies. It is commonly represented by a graph of output level or gain against frequency. A perfectly flat response would reproduce all frequencies in the specified range with equal gain, although real systems have variations and practical limits. Frequency response can also include phase response, which describes how the phase of the output changes with frequency. Measurements depend on test conditions, signal level, measurement position, loading and the acoustic environment. Frequency-response information helps engineers identify resonances, weak frequency regions, unwanted peaks and limitations in an audio system.

Key Points

  • Frequency response describes output behavior across frequency.

  • It is often displayed as gain or output level versus frequency.

  • A flat response means approximately equal gain across a specified range.

  • Real systems have bandwidth limits and response variations.

  • Phase response is another important frequency-dependent characteristic.

  • Measurement conditions influence the reported response.

Applications

  • Comparing microphones and loudspeakers.

  • Designing audio amplifiers and filters.

  • Equalizing recording and playback systems.

  • Testing headphones and studio monitors.

  • Diagnosing resonances and frequency-response problems.

Common Mistakes

  • Assuming a flat frequency response guarantees perfect sound reproduction.

  • Confusing frequency response with frequency range alone.

  • Ignoring measurement distance and room effects.

  • Assuming voltage gain in decibels is always identical to power gain in decibels.

Learning Outcomes

  • Define frequency response.

  • Interpret a basic frequency-response graph.

  • Explain the meaning of flat response and bandwidth.

  • Distinguish amplitude response from phase response.

Practice Questions

QuestionAnswer

What does a frequency-response graph show?

How an audio system's output level or gain changes with input frequency.

What is meant by a flat frequency response?

Approximately equal gain across a specified frequency range.

Why are measurement conditions important?

Position, loading, signal level and room acoustics can affect the measured response.

Related Concepts

  • Bandwidth

  • Audio Equalization

  • Phase Response

  • Amplifier Gain

  • Loudspeaker Performance

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Sound Reproduction by Floyd E. Toole; Audio Engineering: Know It All by Douglas Self and colleagues.

Suggest a correction or source · More in Acoustics