Rolling motion involves translation of an object's centre of mass and rotation about that centre. Static friction at the contact point may provide the torque needed for a wheel or ball to roll without slipping; it does not necessarily oppose the object's overall motion. Rolling resistance is a separate real-world effect caused by deformation and other losses in the wheel and surface, and it tends to resist rolling. In ideal pure rolling on a fixed surface, the point of contact is instantaneously at rest relative to the surface. Distinguish rolling without slipping from sliding, where kinetic friction applies. The equations relating linear and angular quantities assume a rigid object rolling on a surface without slipping.
Rolling Resistance and Friction
Rolling resistance opposes rolling motion, while static friction can enable a wheel to roll without slipping.
For ideal rolling without slipping: v_cm = ωR and a_cm = αR (along the direction of motion, with consistent signs)
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
v_cm | Speed of the centre of mass | m/s |
ω | Angular speed | rad/s |
R | Rolling radius | m |
a_cm | Centre-of-mass acceleration | m/s² |
α | Angular acceleration | rad/s² |
Example or application
A wheel of radius 0.30 m rolling without slipping at 2.0 m/s has angular speed ω = v/R = 6.67 rad/s.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.