✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · INFO-PHY-OSC-092

Standing Sound Waves in Pipes

Standing sound waves form in pipes when incident and reflected sound waves interfere. The pipe's boundary conditions determine the locations of displacement nodes and antinodes and the resonant frequencies that can be supported.

λₙ = 2L/n (pipe open at both ends, n = 1, 2, 3, …); λₙ = 4L/(2n - 1) (one end closed, n = 1, 2, 3, …)

Explanation

A standing sound wave results from the superposition of waves travelling in opposite directions, often due to reflection at the ends of a pipe. At a rigid closed end, air displacement is approximately zero, creating a displacement node and a pressure antinode. At an open end, air displacement is generally large and pressure variation is approximately zero, creating a displacement antinode and a pressure node. A pipe open at both ends supports resonant wavelengths λₙ = 2L/n in the ideal model. A pipe closed at one end supports λₙ = 4L/(2n - 1), so only odd harmonics occur in the ideal closed-pipe model. Real pipes may require end corrections because the effective acoustic length differs slightly from the physical length.

Variables

SymbolMeaningUnit

λₙ

Wavelength of the nth allowed mode

m

L

Effective length of the pipe

m

n

Positive integer mode number

dimensionless

Example or application

An ideal pipe open at both ends has an effective length of 0.50 m. Its fundamental wavelength is λ₁ = 2L = 1.00 m. If sound speed is 340 m/s, the fundamental frequency is f₁ = v/λ₁ = 340 Hz.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

Suggest a correction or source · More in Oscillations & Waves