✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · INFO-PHY-THM-023

Work in Thermodynamic Systems

Thermodynamic work is energy transferred across a system boundary through an organized interaction that can be described by a generalized force acting through a generalized displacement. Examples include pressure–volume work, electrical work, shaft work, and work associated with moving boundaries. Work, like heat, is a process quantity rather than a state property.

For quasi-static pressure–volume work, W = ∫(from V₁ to V₂) P_ext dV, where W is positive when work is done by the system.

Explanation

Thermodynamic work occurs when a generalized force produces a displacement or when an equivalent energy-transfer interaction takes place. In a piston–cylinder device, a gas can move a piston against an external pressure, transferring energy as boundary work. Electrical work may occur when charge moves through a potential difference, and shaft work may be transferred through a rotating shaft. For a quasi-static process, the system pressure is well-defined at each intermediate state; if the process is mechanically reversible, the external pressure differs from the system pressure by an infinitesimal amount, allowing the boundary-work integral to be written using system pressure. For a finite, irreversible expansion against an external pressure, the actual work must be evaluated using the resisting external pressure and the appropriate process conditions. Work is measured in joules and depends on the path followed between states.

Variables

SymbolMeaningUnit

W

Work done by the system under the stated sign convention

J

P_ext

External pressure resisting boundary motion

Pa

V

System volume

m³

V₁

Initial system volume

m³

V₂

Final system volume

m³

Example or application

A gas expands quasi-statically while pushing a piston outward. Because the system volume increases, the gas performs positive boundary work under the convention that work done by the system is positive.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Çengel and Boles, Thermodynamics: An Engineering Approach; Callen, Thermodynamics and an Introduction to Thermostatistics.

Suggest a correction or source · More in Thermodynamics