✦ScienexySCIENCE KNOWLEDGE LIBRARY
formula · INFO-PHY-THM-024

Pressure–Volume Work

Pressure–volume work, also called boundary work, is the energy transferred when a system boundary moves against a pressure. For a quasi-static process, it is obtained by integrating pressure with respect to volume. The area under a pressure–volume curve represents the boundary work for the process when the curve and sign convention are appropriately defined.

W = ∫(from V₁ to V₂) P dV for a quasi-static process; for constant pressure, W = P(V₂ − V₁).

Explanation

Pressure–volume work occurs in devices such as piston–cylinder assemblies. During expansion, V₂ is greater than V₁ and the system performs positive work under the work-by-system convention. During compression, V₂ is less than V₁ and the work done by the system is negative; equivalently, positive work is done on the system. For a quasi-static process, pressure can be integrated along the sequence of equilibrium states. For irreversible boundary motion, the work should instead be calculated from the actual external pressure opposing the moving boundary, when that pressure is known. In a constant-pressure process, the integral simplifies to W = PΔV. Since Pa·m³ = J, pressure multiplied by volume change has units of energy. Pressure–volume work is path-dependent, so two processes connecting the same initial and final states can involve different amounts of work.

Variables

SymbolMeaningUnit

W

Boundary work done by the system

J

P

System pressure for a quasi-static process

Pa

V₁

Initial volume

m³

V₂

Final volume

m³

ΔV

Change in volume, V₂ − V₁

m³

Example or application

A gas expands at a constant pressure of 200 kPa from 0.010 m³ to 0.016 m³. The work done by the gas is W = 200,000 × (0.016 − 0.010) = 1,200 J.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • OpenStax, University Physics Volume 2, First Law of Thermodynamics; Çengel and Boles, Thermodynamics: An Engineering Approach.

Suggest a correction or source · More in Thermodynamics