✦ScienexySCIENCE KNOWLEDGE LIBRARY
formula · INFO-PHY-THM-032

Linear Thermal Expansion

Linear thermal expansion describes the change in the length of a solid when its temperature changes. For a uniform material undergoing a small temperature change, the length change is approximately proportional to the initial length and temperature change.

ΔL = αL₀ΔT; L = L₀(1 + αΔT).

Explanation

The linear expansion coefficient α expresses the fractional change in length per unit temperature change, within the specified temperature range and measurement conditions. The approximate equation assumes α is constant over the temperature interval. If α varies significantly with temperature, the more general relationship is ΔL = L₀∫α(T)dT over the relevant temperature range for a freely expanding uniform material. Heating generally gives a positive ΔL for ordinary materials with positive α, while cooling gives a negative ΔL. Some materials have negative or direction-dependent expansion coefficients. The formula describes free expansion; if the rod is restrained, thermal stress may develop instead of the full predicted length change.

Variables

SymbolMeaningUnit

ΔL

Change in length

m

L₀

Initial length

m

L

Final length

m

α

Linear thermal expansion coefficient

K⁻¹

ΔT

Final temperature minus initial temperature

K

Example or application

A freely expanding 5 m rail has α = 11 × 10⁻⁶ K⁻¹ and warms by 30 K. Its approximate length increase is ΔL = (11 × 10⁻⁶)(5)(30) = 0.00165 m, or 1.65 mm.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • OpenStax, College Physics 2e, Thermal Expansion; NIST, thermophysical property and measurement resources.

Suggest a correction or source · More in Thermodynamics