For a freely expanding bar, the thermal strain is approximately ε_th = αΔT. If the bar is fully restrained, its total axial strain is approximately zero, so mechanical strain must oppose the thermal strain. Under a one-dimensional, linearly elastic model, this gives σ ≈ −EαΔT, where tensile stress is positive. Heating a fully restrained bar therefore produces compressive stress, while cooling it produces tensile stress. This approximation assumes uniform temperature, small strain, a constant elastic modulus and expansion coefficient, and no yielding, buckling, creep, or other nonlinear effects. Real structures may have partial restraint, temperature gradients, joints, and complex stress distributions. Engineers account for these effects when designing bridges, pipelines, rails, and machinery.
Thermal Stress and Constrained Expansion
Thermal stress develops when a material's natural expansion or contraction is partially or completely restrained during a temperature change. A freely expanding uniform material may change dimensions with little thermal stress, whereas a fully constrained material can develop substantial stress.
For a uniform, linearly elastic bar under complete axial restraint: σ ≈ −EαΔT.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
σ | Axial thermal stress; tension positive | Pa |
E | Young's modulus | Pa |
α | Linear expansion coefficient | K⁻¹ |
ΔT | Temperature change | K |
ε_th | Free thermal strain | Dimensionless |
Example or application
A steel bar with E = 200 GPa and α = 12 × 10⁻⁶ K⁻¹ is fully restrained and heated by 20 K. The idealized stress is σ ≈ −(200 × 10⁹)(12 × 10⁻⁶)(20) = −48 MPa, indicating compression.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Çengel and Boles, Thermodynamics: An Engineering Approach; standard mechanics of materials references on thermal stress.