✦ScienexySCIENCE KNOWLEDGE LIBRARY
law · INFO-PHY-THM-042

Boyle’s Law

Boyle’s law states that for a fixed amount of gas at constant temperature, pressure is inversely proportional to volume when the gas behaves ideally. If the volume decreases, the pressure increases; if the volume increases, the pressure decreases.

P₁V₁ = P₂V₂, for a fixed amount of ideal gas at constant absolute temperature.

Explanation

Boyle’s law follows from the ideal-gas equation when the amount of gas and absolute temperature remain constant. Under those conditions, PV remains constant. The pressure used must be absolute pressure rather than gauge pressure. The law describes equilibrium states and is most accurate for gases that behave approximately ideally. During compression, molecular collisions with the container walls occur more frequently per unit area when the volume decreases, producing higher pressure at the same temperature. If the gas heats up or cools down during the process, the simple constant-temperature relationship does not apply directly.

Variables

SymbolMeaningUnit

P₁

Initial absolute pressure

Pa

V₁

Initial volume

m³

P₂

Final absolute pressure

Pa

V₂

Final volume

m³

Example or application

A gas occupies 4.0 L at 100 kPa. If it is compressed isothermally to 2.0 L, its final pressure is P₂ = P₁V₁/V₂ = (100)(4.0)/2.0 = 200 kPa absolute.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • OpenStax, University Physics Volume 2, The Ideal Gas Law; NIST, gas thermometry and thermophysical measurement resources.

Suggest a correction or source · More in Thermodynamics