When no heat enters or leaves a closed system and work is the only energy-transfer mechanism, the first law gives W = −ΔU. For a fixed amount of ideal gas, the internal-energy change is ΔU = nC_V,m(T₂ − T₁), provided the heat capacity is constant over the temperature range. Therefore, the work done by the gas is W = nC_V,m(T₁ − T₂). For a reversible adiabatic ideal-gas process with constant heat capacities, an equivalent expression is W = (p₁V₁ − p₂V₂)/(γ − 1). Positive work corresponds to expansion that lowers the gas temperature, while negative work corresponds to compression that raises it. The equations assume no changes in macroscopic kinetic or potential energy and no additional work modes.
Work in an Adiabatic Process
For an adiabatic process with no other energy-transfer mechanisms, the work done by a closed system equals the negative change in its internal energy.
W = −ΔU; for an ideal gas, W = nC_V,m(T₁ − T₂)
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
W | Net work done by the gas | J |
ΔU | Change in internal energy | J |
n | Amount of gas | mol |
C_V,m | Molar heat capacity at constant volume | J/(mol·K) |
T₁ | Initial absolute temperature | K |
T₂ | Final absolute temperature | K |
γ | Heat-capacity ratio | dimensionless |
Example or application
One mole of an ideal gas with C_V,m = 20.8 J/(mol·K) cools from 400 K to 300 K during an adiabatic expansion. The work done by the gas is W = 1 × 20.8 × (400 − 300) = 2080 J.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- OpenStax, University Physics Volume 2, Thermodynamics; Çengel, Boles and Kanoğlu, Thermodynamics: An Engineering Approach.