The defining thermodynamic relation for entropy is dS = δQ_rev/T. If the system exchanges heat reversibly while its temperature changes, entropy change must be calculated by integrating over the process, accounting for the instantaneous absolute temperature. If temperature remains constant, the integral simplifies to ΔS = Q_rev/T. For a reversible process, the combined entropy change of the system and its surroundings is zero, although the system's entropy may increase or decrease. For example, reversible heat absorption increases the system's entropy, while reversible heat rejection decreases it. Heat must be measured with its sign: Q_rev is positive for heat entering the system and negative for heat leaving it. The formula Q_rev/T applies directly only when the heat transfer occurs at a constant system temperature; otherwise, the integral form is required.
Entropy Change in Reversible Processes
For a reversible process, the entropy change of a system is obtained by integrating reversible heat transfer divided by absolute temperature. For an isothermal reversible process, the relation simplifies to ΔS = Q_rev/T.
ΔS = ∫₁² δQ_rev / T; for constant T, ΔS = Q_rev / T
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
ΔS | Entropy change of the system | J K⁻¹ |
δQ_rev | Infinitesimal reversible heat transfer into the system | J |
Q_rev | Net reversible heat transferred during an isothermal process, positive into the system | J |
T | Absolute temperature | K |
Example or application
A system absorbs 600 J of heat reversibly at a constant temperature of 300 K. Its entropy change is ΔS = 600/300 = 2 J K⁻¹. If it instead releases 600 J under the same conditions, its entropy change is −2 J K⁻¹.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- OpenStax, University Physics Volume 2; Moran et al., Fundamentals of Engineering Thermodynamics.