Thermal efficiency is the ratio of useful net work output to heat input from the hot reservoir. Using the First Law for a cyclic engine, W_net = Q_H − Q_C, so η_th = 1 − Q_C/Q_H. If Q_H and Q_C are measured in the same energy units, efficiency is dimensionless and is commonly expressed as a percentage. The Second Law prevents a cyclic engine from converting all heat absorbed from a single reservoir into net work. For an ideal reversible engine operating between two reservoirs, the maximum possible efficiency is the Carnot efficiency, η_Carnot = 1 − T_C/T_H, with temperatures measured in kelvin. A real engine's efficiency is below this ideal limit because of irreversibilities and practical constraints. Efficiency describes the conversion of heat input into work; it should not be confused with the overall energy efficiency of a system that may also deliver useful heat.
Thermal Efficiency of Heat Engines
Thermal efficiency measures the fraction of heat absorbed by a heat engine that is converted into net work output. For a cyclic engine, efficiency is less than one when heat must be rejected to a colder reservoir.
η_th = W_net / Q_H = 1 − Q_C / Q_H
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
η_th | Thermal efficiency of the heat engine | Dimensionless or % |
W_net | Net work output per cycle | J |
Q_H | Heat input from the hot reservoir per cycle | J |
Q_C | Heat rejected to the cold reservoir per cycle | J |
T_H | Hot-reservoir absolute temperature | K |
T_C | Cold-reservoir absolute temperature | K |
Example or application
An engine absorbs 1,500 J of heat and rejects 900 J per cycle. It produces 600 J of net work, so its thermal efficiency is 600/1,500 = 0.40, or 40%.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- OpenStax, University Physics Volume 2; Moran et al., Fundamentals of Engineering Thermodynamics.