✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-CHE-004-012

Measurement and Experimental Uncertainty

Measurement is the process of determining the value of a physical quantity by comparison with a standard. Experimental uncertainty describes the range of doubt associated with a measured result.

Relative uncertainty = Δx / x; Percentage uncertainty = (Δx / x) × 100%

Explanation

Every experimental measurement has some degree of uncertainty because instruments have limited resolution, experimental conditions may vary, and measurement procedures are not perfectly reproducible. A measured result should therefore be reported with an appropriate estimate of uncertainty. Accuracy describes how close a measurement is to an accepted reference value, whereas precision describes the agreement among repeated measurements. Random uncertainty causes unpredictable variation between measurements, while systematic effects shift results in a consistent direction. Repeated measurements help evaluate random variation, while calibration, reference standards, and careful experimental design help identify systematic effects. Uncertainty may be expressed as an absolute uncertainty, a relative uncertainty, or a percentage uncertainty. Scientific results should not imply more certainty than the measurement method supports.

Variables

SymbolMeaningUnit

x

Measured value

Unit of the measured quantity

Δx

Absolute uncertainty in the measurement

Same as x

Example or application

  • A balance reading of 10.25 ± 0.01 g communicates both the measured mass and its estimated uncertainty.

  • Repeated temperature measurements help evaluate measurement variation.

  • Calibration with a reference standard can reveal systematic measurement errors.

  • A measurement with small uncertainty can provide stronger evidence when comparing similar experimental results.

Definition

Measurement is the assignment of a numerical value and unit to a physical quantity, while experimental uncertainty is the quantified doubt associated with the result of that measurement.

Purpose

To produce reliable scientific measurements, evaluate the quality of experimental results, and communicate the limitations of measured values.

Importance

Uncertainty evaluation is essential for reliable physical chemistry experiments. It helps researchers compare results, determine whether observed differences are meaningful, improve experimental procedures, and avoid reporting unjustified precision. It is also important when experimental measurements are used in calculations or scientific models.

Learning Objectives

  • Define measurement and experimental uncertainty.

  • Distinguish accuracy from precision.

  • Compare random and systematic uncertainty.

  • Calculate relative and percentage uncertainty.

  • Explain why uncertainty should accompany experimental results.

Key Concepts

  • Measurement

  • Accuracy

  • Precision

  • Random uncertainty

  • Systematic uncertainty

  • Absolute uncertainty

  • Relative uncertainty

  • Calibration

Working Principle

A measurement is obtained using a defined method and instrument. The uncertainty is evaluated from instrument specifications, repeated observations, calibration information, and relevant sources of variation.

Process

  • Identify the physical quantity to be measured.

  • Select a suitable calibrated instrument.

  • Follow a consistent measurement procedure.

  • Record the readings and their units.

  • Repeat measurements when appropriate.

  • Evaluate relevant sources of uncertainty.

  • Report the result with a justified uncertainty.

Applications

  • Measuring temperature changes during chemical reactions.

  • Determining accurate sample masses and volumes.

  • Evaluating the reliability of thermodynamic data.

  • Comparing experimental results with theoretical predictions.

  • Improving laboratory procedures and instrument calibration.

Worked Example

Problem

A sample has a measured mass of 20.0 g with an absolute uncertainty of 0.2 g. Calculate its percentage uncertainty.

Solution

  • Use percentage uncertainty = (Δx / x) × 100%.

  • Substitute: (0.2 / 20.0) × 100%.

  • Calculate: 0.01 × 100% = 1%.

Answer

The percentage uncertainty is 1%.

Common Misconceptions

  • Accuracy and precision are not interchangeable terms.

  • A measurement with many decimal places is not automatically accurate.

  • Repeating a measurement can reduce uncertainty from random variation but does not automatically remove systematic error.

  • Uncertainty is not necessarily the same as a mistake or human error.

Practice Questions

  • What is experimental uncertainty?

  • Differentiate accuracy and precision.

  • What is the difference between random and systematic uncertainty?

  • Calculate the percentage uncertainty for 50.0 ± 0.5 cm.

  • Why is instrument calibration important?

Key Takeaway

Reliable scientific measurements require suitable instruments, consistent procedures, uncertainty evaluation, and honest reporting of measurement limitations.

Prerequisites

  • Fundamental Physical Quantities

  • SI Units in Physical Chemistry

  • Basic arithmetic and percentages

Reference

  • Evaluation of Measurement Data: Guide to the Expression of Uncertainty in Measurement, JCGM

  • The International System of Units (SI), BIPM

  • IUPAC Green Book: Quantities, Units and Symbols in Physical Chemistry

Related Topics

  • SI Units in Physical Chemistry

  • Significant Figures and Scientific Notation

  • Graphical Representation of Chemical Data

  • Mathematical Modelling

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Physical Chemistry