✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CHE-005-007

Analytes, Matrices, and Interfering Substances

An analytical sample contains the analyte of interest together with other components that form its matrix. Some matrix components can interfere with the measurement by producing similar signals, changing chemical equilibria, affecting analyte recovery, or altering instrument response.

Explanation

A sample submitted for chemical analysis is rarely composed of only one substance. It usually contains the target component, other chemical constituents, and possibly unwanted contaminants. Understanding the relationships among analytes, matrices, and interfering substances is essential for selecting and performing a reliable analytical method.

The analyte is the substance or chemical component whose identity or amount is being determined. For example, when measuring calcium in milk, calcium is the analyte. The matrix is the remaining sample material, including water, proteins, fats, carbohydrates, minerals, and other constituents.

An interfering substance is a component that affects the determination of the analyte. An interferent may produce a signal similar to the analyte, react with the same reagent, change the analyte's chemical form, compete for binding sites, or influence the physical behaviour of the sample.

Interferences can occur at different stages. During sample preparation, an analyte may bind to particles or be lost during extraction. During a chemical reaction, another ion may consume the reagent. During instrumental measurement, overlapping spectral lines, background absorption, ion suppression, or detector cross-response may distort the signal.

The influence of the matrix depends on the analytical technique. A matrix component that is harmless in one method may cause serious interference in another. Analysts therefore use techniques such as dilution, filtration, extraction, masking, matrix matching, standard addition, background correction, or chromatographic separation to reduce interference.

An important distinction is that the matrix is not necessarily harmful. Many matrix components do not interfere under a particular method. An interferent is defined by its effect on the measurement, not merely by being present in the sample.

Variables

SymbolMeaningUnit

Cspiked

Measured concentration in the spiked sample

Same concentration unit throughout

Coriginal

Measured concentration in the original sample

Same concentration unit throughout

Cadded

Concentration contribution from the added analyte

Same concentration unit throughout

Example or application

A worked example has not yet been added.

Definition

An analyte is the chemical component being determined, a matrix is the material containing the analyte, and an interfering substance is a component that affects the measurement of the analyte.

Purpose

  • Identify the target component in a complex sample.

  • Understand how other sample components influence analytical results.

  • Recognize different types of analytical interference.

  • Select suitable strategies to reduce matrix effects and improve measurement reliability.

Key Concepts

TermMeaning

Analyte

The chemical species or component selected for determination.

Matrix

The sample material containing the analyte and other components.

Interferent

A substance or condition that changes the measured response or causes bias in analyte determination.

Matrix effect

An influence of sample components on the analytical response or analyte recovery.

Masking

A chemical strategy that reduces the participation of an interfering species in an analytical reaction.

Recovery

The proportion of analyte retained or measured after a defined analytical procedure, commonly evaluated by comparison with an expected or added amount.

Principle

An analytical signal should respond to the analyte in a predictable way. Matrix components may alter this relationship by contributing to the signal, suppressing or enhancing it, changing analyte availability, or interfering with the chemical reaction. Reliable analysis therefore requires the matrix and possible interferences to be evaluated.

Types Of Interference

TypeDescriptionExample

Spectral interference

Another species produces a signal at or near the analyte's measurement wavelength or spectral region.

Overlapping emission lines in optical emission spectroscopy.

Chemical interference

Another substance reacts with the analyte or reagent and changes the chemical process.

A competing ligand binds a metal ion that is intended to react with a selective reagent.

Physical interference

Physical properties of the sample affect sample introduction or measurement.

Differences in viscosity affecting nebulization efficiency.

Ionization interference

Changes in ionization equilibrium alter the number of atoms or ions contributing to a signal.

Easily ionized elements changing the ionization behaviour of an analyte in a flame.

Matrix suppression or enhancement

The matrix decreases or increases the analytical response relative to that expected from a matrix-free standard.

Ion suppression in electrospray mass spectrometry.

Analytical Process

  • Identify the analyte and define the sample matrix.

  • List likely chemical and physical components of the matrix.

  • Determine which components may influence the selected method.

  • Evaluate interference using blanks, matrix spikes, reference materials, or suitable comparison experiments.

  • Apply an appropriate correction or separation strategy when required.

  • Confirm that analyte recovery and measurement performance are acceptable.

  • Document the remaining limitations and possible matrix effects.

Interference Control

MethodDescription

Sample dilution

Reduces matrix concentration and may reduce matrix effects, although analyte concentration also decreases.

Masking

Uses a suitable reagent to bind or otherwise suppress an interfering species.

Separation

Removes or separates interfering components before measurement.

Matrix matching

Prepares calibration standards with a matrix similar to that of the samples.

Standard addition

Adds known analyte amounts directly to sample aliquots to account for certain matrix-dependent response effects.

Background correction

Estimates and corrects an appropriate background contribution in instrumental measurement.

Equations

NameExpressionDescription

Percentage recovery

%Recovery = [(Cspiked − Coriginal) / Cadded] × 100

Compares the measured increase in concentration after spiking with the amount added, when concentrations are expressed on the same basis.

Units

  • mg L⁻¹

  • µg L⁻¹

  • mg kg⁻¹

  • %

  • mol L⁻¹

Worked Example

Problem

A water sample contains an original measured copper concentration of 2.0 mg L⁻¹. After adding a known copper spike equivalent to 5.0 mg L⁻¹, the measured concentration is 6.7 mg L⁻¹. Calculate the percentage recovery.

Steps

  • Original concentration = 2.0 mg L⁻¹.

  • Added concentration = 5.0 mg L⁻¹.

  • Spiked sample result = 6.7 mg L⁻¹.

  • Measured increase = 6.7 − 2.0 = 4.7 mg L⁻¹.

  • %Recovery = (4.7/5.0) × 100.

Answer

The spike recovery is 94%. This indicates that 94% of the added copper was recovered under the test conditions; acceptance depends on the method and its predefined criteria.

Applications

  • Measuring metals in complex environmental samples.

  • Determining active ingredients in pharmaceutical formulations.

  • Analysing proteins, fats, and minerals in food samples.

  • Measuring metabolites in blood and urine.

  • Detecting trace contaminants in industrial materials.

Advantages

  • Understanding matrix effects helps prevent biased analytical results.

  • Interference studies improve method selectivity and reliability.

  • Suitable correction methods can allow analysis of complex samples.

  • Recovery experiments provide evidence about sample preparation performance.

Limitations

  • Not all interferences can be completely removed.

  • Dilution may reduce analyte concentration below the useful measurement range.

  • Matrix matching may be difficult when sample composition varies.

  • Standard addition can require more measurements and does not correct every possible sample-preparation loss.

Common Mistakes

  • Calling every matrix component an interferent.

  • Assuming that a matrix-free standard behaves exactly like a real sample.

  • Ignoring physical effects such as viscosity or dissolved solids.

  • Assuming that spike recovery alone proves complete method validity.

  • Using dilution without checking whether the analyte remains measurable.

Learning Objectives

  • Define analyte, matrix, and interfering substance.

  • Distinguish the major types of analytical interference.

  • Explain how matrix effects influence chemical and instrumental measurements.

  • Describe methods used to reduce or correct interference.

  • Calculate percentage recovery from a spike experiment.

Practice Questions

  • Define analyte and matrix with one example.

  • What is an interfering substance?

  • Differentiate between spectral and chemical interference.

  • Explain why sample viscosity may affect an instrumental measurement.

  • Describe four strategies for reducing matrix effects.

  • A sample gives 4.0 mg L⁻¹ before spiking and 8.5 mg L⁻¹ after adding 5.0 mg L⁻¹ analyte. Calculate percentage recovery.

  • Why does a good spike recovery not automatically prove that every part of a method is valid?

Key Takeaways

  • The analyte is the target component; the matrix is the material containing it.

  • An interferent affects the analyte determination under the selected analytical conditions.

  • Interference may be chemical, physical, spectral, or matrix-related.

  • Dilution, masking, separation, matrix matching, and standard addition are possible control strategies.

References

TitleAuthorsEditionTypeScopeUrl

Quantitative Chemical Analysis

Daniel C. Harris and Charles A. Lucy

10th edition

Textbook

Interferences, selectivity, sample preparation, and quantitative analysis.

Principles of Instrumental Analysis

Douglas A. Skoog, F. James Holler, and Stanley R. Crouch

7th edition

Textbook

Matrix effects and instrumental interference.

Eurachem Guides

Technical guidance

Method validation, recovery, and analytical measurement quality.

https://eurachem.org/index.php/publications/guides

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Analytical Chemistry