✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CHE-005-009

Units Used in Analytical Chemistry

Analytical chemistry uses SI units and commonly accepted derived units to express mass, volume, amount of substance, concentration, temperature, pressure, and instrumental measurements. Correct unit selection and conversion are essential for meaningful calculations and reliable reporting.

Explanation

A numerical measurement is incomplete without a unit. In analytical chemistry, units communicate the scale and physical meaning of a measured quantity. The International System of Units (SI) provides a consistent foundation for scientific measurement.

The SI base units include the kilogram for mass, metre for length, second for time, ampere for electric current, kelvin for thermodynamic temperature, mole for amount of substance, and candela for luminous intensity. Analytical chemistry frequently uses derived units such as litre, pascal, joule, coulomb, and siemens, as well as concentration units such as mol L⁻¹.

Laboratory work often involves very small or very large quantities. SI prefixes simplify the expression of these quantities. For example, milli represents 10⁻³, micro represents 10⁻⁶, nano represents 10⁻⁹, and kilo represents 10³. A concentration of 0.000001 g can therefore be written as 1 µg.

Mass and volume units require particular care. The SI base unit of mass is the kilogram, but grams and milligrams are widely used in laboratories. The SI derived unit of volume is the cubic metre, while litre and millilitre are accepted for use with SI. One litre equals one cubic decimetre, and one millilitre equals one cubic centimetre.

Analytical concentrations may be expressed in mol L⁻¹, g L⁻¹, mg L⁻¹, or mass-based units such as mg kg⁻¹. The correct unit depends on whether the result is based on solution volume or sample mass. Instrumental methods may also produce signals in absorbance, volts, amperes, counts, or other method-specific units.

Dimensional analysis is a useful way to check calculations. Units should cancel correctly according to the mathematical relationship. If the resulting unit does not match the physical quantity being calculated, the calculation or conversion should be reviewed.

Variables

SymbolMeaningUnit

T

Thermodynamic temperature

K

t

Celsius temperature

°C

γ

Mass concentration

g L⁻¹

m

Mass

g

V

Volume

L

c

Amount concentration

mol L⁻¹

n

Amount of substance

mol

Example or application

A worked example has not yet been added.

Definition

A measurement unit is a defined reference quantity used to express the magnitude of a physical or chemical quantity.

Purpose

  • Recognize common SI and laboratory units.

  • Use SI prefixes correctly.

  • Convert between common analytical units.

  • Apply dimensional analysis to check calculations.

  • Report measurements with appropriate units.

Key Concepts

TermMeaning

SI

The International System of Units, the internationally agreed system of measurement units.

Base unit

A fundamental unit in the SI system.

Derived unit

A unit formed by mathematical combinations of base units.

SI prefix

A prefix that indicates a power-of-ten multiple or fraction of a unit.

Dimensional analysis

A calculation method that uses units to check the consistency of equations and conversions.

Principle

Every numerical quantity must be associated with a unit that represents the physical dimension being measured. Unit conversions are performed using equality relationships, and dimensional consistency must be maintained throughout calculations.

Common Units

QuantityUnitSymbolCommon Laboratory Units

Mass

kilogram

kg

  • g

  • mg

  • µg

Volume

cubic metre

m³

  • L

  • mL

  • µL

Amount of substance

mole

mol

  • mmol

  • µmol

  • nmol

Time

second

s

  • min

  • h

Temperature

kelvin

K

  • °C

Pressure

pascal

Pa

  • kPa

  • bar

  • atm

Electric potential

volt

V

  • mV

Electric current

ampere

A

  • mA

  • µA

Si Prefixes

PrefixSymbolFactor

kilo

k

10³

centi

c

10⁻²

milli

m

10⁻³

micro

µ

10⁻⁶

nano

n

10⁻⁹

pico

p

10⁻¹²

mega

M

10⁶

giga

G

10⁹

Important Conversions

ConversionDescription

1 kg = 1000 g

Kilograms to grams.

1 g = 1000 mg

Grams to milligrams.

1 mg = 1000 µg

Milligrams to micrograms.

1 L = 1000 mL

Litres to millilitres.

1 mL = 1000 µL

Millilitres to microlitres.

1 L = 10⁻³ m³

Litres to cubic metres.

T(K) = t(°C) + 273.15

Conversion from Celsius temperature to kelvin.

Equations

NameExpressionDescription

Temperature conversion

T(K) = t(°C) + 273.15

Converts Celsius temperature to thermodynamic temperature in kelvin.

Mass concentration

γ = m / V

Mass concentration expressed as mass per solution volume.

Amount concentration

c = n / V

Amount concentration expressed as moles per solution volume.

Units

  • kg

  • g

  • mg

  • µg

  • m³

  • L

  • mL

  • µL

  • mol

  • mmol

  • K

  • °C

  • Pa

  • kPa

  • V

  • A

  • mol L⁻¹

  • mg L⁻¹

  • mg kg⁻¹

Worked Examples

ProblemStepsAnswer

Convert 0.0250 g into milligrams and micrograms.

  • Use 1 g = 1000 mg.

  • 0.0250 g × 1000 = 25.0 mg.

  • Use 1 mg = 1000 µg.

  • 25.0 mg × 1000 = 25,000 µg.

0.0250 g = 25.0 mg = 25,000 µg.

Convert 25.0 °C into kelvin.

  • Use T(K) = t(°C) + 273.15.

  • T = 25.0 + 273.15.

  • T = 298.15 K.

25.0 °C corresponds to 298.15 K.

A sample contains 15.0 mg of analyte in 250.0 mL of solution. Calculate the mass concentration in mg L⁻¹.

  • Convert volume: 250.0 mL = 0.2500 L.

  • Use γ = m/V.

  • γ = 15.0/0.2500.

The mass concentration is 60.0 mg L⁻¹.

Applications

  • Preparing standard solutions and reagents.

  • Reporting analyte concentrations in environmental samples.

  • Converting instrumental measurement results into standard units.

  • Performing stoichiometric calculations.

  • Comparing measurements reported by different laboratories.

Advantages

  • Standardized units improve communication and comparison.

  • SI prefixes make very small and very large quantities easier to express.

  • Dimensional analysis helps detect calculation errors.

  • Consistent units support reproducible laboratory procedures.

Limitations

  • Different fields may use non-SI units alongside SI units.

  • Some concentration conversions require density or additional sample information.

  • A unit conversion cannot correct an inaccurate measurement.

  • Instrumental signals may require calibration before they can be expressed in chemical concentration units.

Common Mistakes

  • Confusing mg with µg.

  • Forgetting that 1 L equals 1000 mL.

  • Using Celsius instead of kelvin in equations that require thermodynamic temperature.

  • Mixing concentration units in one equation without conversion.

  • Assuming that mg L⁻¹ and mg kg⁻¹ are interchangeable.

  • Writing a numerical result without its unit.

Learning Objectives

  • Identify common SI base and derived units used in analytical chemistry.

  • Recognize the meaning of common SI prefixes.

  • Convert between mass, volume, temperature, and concentration units.

  • Use dimensional analysis to check calculations.

  • Select suitable units for analytical reporting.

Practice Questions

  • List the SI base units relevant to analytical chemistry.

  • What is the meaning of the prefixes milli, micro, and nano?

  • Convert 2.50 g into milligrams.

  • Convert 750 µL into millilitres.

  • Convert 37.0 °C into kelvin.

  • A solution contains 8.0 mg analyte in 200 mL. Calculate its mass concentration in mg L⁻¹.

  • Why is it important to distinguish mg L⁻¹ from mg kg⁻¹?

Key Takeaways

  • Every analytical measurement must have an appropriate unit.

  • SI units provide a common foundation for scientific measurements.

  • Prefixes represent powers of ten.

  • Dimensional analysis is an important tool for checking calculations.

  • Concentration units must be interpreted according to their denominator.

References

TitlePublisherTypeUrlScopeAuthorsEdition

The International System of Units (SI Brochure)

Bureau International des Poids et Mesures (BIPM)

International metrology reference

https://www.bipm.org/en/publications/si-brochure

SI units, definitions, and prefixes.

Quantitative Chemical Analysis

Textbook

Units and analytical calculations.

Daniel C. Harris and Charles A. Lucy

10th edition

IUPAC Compendium of Chemical Terminology

Scientific reference

https://goldbook.iupac.org/

Definitions of physical and chemical quantities.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Analytical Chemistry