Analytical chemistry requires more than obtaining a numerical result. The result must be evaluated to determine how closely it represents the quantity being measured and how consistently the measurement procedure performs. Accuracy, precision, and trueness are related concepts, but they are not interchangeable.
Precision describes the closeness of agreement among repeated measurements obtained under specified conditions. A precise method produces results that are relatively close to one another. Precision is commonly evaluated using the standard deviation or relative standard deviation of replicate measurements.
Trueness describes the closeness of agreement between the mean of a large number of replicate measurements and an accepted reference value. It is commonly associated with systematic measurement error or bias. A method may produce highly consistent results but still be untrue if all measurements are shifted away from the reference value.
Accuracy is a qualitative concept describing closeness of agreement between a measured value and the true value of the measurand. In analytical practice, accuracy is influenced by both random and systematic effects. It should not be treated as a separate numerical quantity with one universal calculation.
Consider a reference value of 10.00 mg L⁻¹. A method that repeatedly gives 9.99, 10.00, and 10.01 mg L⁻¹ demonstrates good precision and good trueness. A method that gives 9.50, 9.51, and 9.49 mg L⁻¹ is precise but biased low. A method that gives 8.0, 10.0, and 12.0 mg L⁻¹ may have a mean close to 10.0 mg L⁻¹ but poor precision.
Precision is affected by random variation. Trueness is affected by systematic effects such as calibration bias, incomplete recovery, or a consistent error in sample preparation. Both must be evaluated to understand analytical performance.
Accuracy, Precision, and Trueness
Accuracy, precision, and trueness describe different aspects of analytical measurement quality. Precision concerns agreement among repeated measurements, trueness concerns agreement between the mean result and an accepted reference value, and accuracy concerns closeness of agreement between a measured value and the true value.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
xᵢ | Individual measured value | Same as measurand |
x̄ | Sample mean | Same as measurand |
s | Sample standard deviation | Same as measurand |
n | Number of measurements | Dimensionless |
xref | Accepted reference value | Same as measurand |
Example or application
A worked example has not yet been added.
Definition
Precision is the closeness of agreement among replicate measured values. Trueness is the closeness of agreement between the mean of replicate measurements and an accepted reference value. Accuracy describes the overall closeness of agreement between a measured value and the true value.
Purpose
Understand different aspects of measurement quality.
Distinguish random variation from systematic bias.
Evaluate replicate results using statistical measures.
Understand why precision alone does not establish trueness.
Interpret analytical performance using reference materials and quality-control data.
Key Concepts
| Term | Meaning |
|---|---|
Precision | Closeness of agreement among repeated measurements under specified conditions. |
Trueness | Closeness of agreement between the mean of repeated measurements and an accepted reference value. |
Accuracy | Closeness of agreement between a measured value and the true value of the measurand. |
Bias | An estimate of systematic measurement error, often expressed as the difference between the expected measurement result and a reference value. |
Repeatability | Precision under repeatability conditions, such as the same method, operator, instrument, and laboratory over a short time. |
Reproducibility | Precision under reproducibility conditions, commonly involving different laboratories or substantially different measurement conditions. |
Principle
Measurement quality is evaluated by examining both the spread of repeated results and their agreement with an appropriate reference value. Small scatter indicates good precision, while a mean close to the reference value indicates good trueness. A method requires both characteristics to support reliable analytical conclusions.
Comparison
| Property | Main concern | Common evaluation | Example |
|---|---|---|---|
Precision | Random variation. | Standard deviation and relative standard deviation. | Repeated measurements give nearly identical values. |
Trueness | Systematic bias. | Difference between the mean result and an accepted reference value. | The mean of replicate measurements agrees with a certified reference value. |
Accuracy | Overall closeness to the true value. | Qualitative assessment informed by precision and trueness. | Results are both consistent and close to the accepted reference value. |
Experimental Evaluation
Analyse replicate portions of a homogeneous sample to estimate precision.
Use a suitable certified reference material when available to evaluate trueness.
Perform recovery experiments to investigate losses or matrix effects.
Compare results from independent methods when appropriate.
Examine calibration standards and control samples for systematic shifts.
Report the statistical basis and measurement conditions.
Equations
| Name | Expression | Description |
|---|---|---|
Arithmetic mean | x̄ = Σxᵢ / n | The average of n measured values. |
Sample standard deviation | s = √[Σ(xᵢ − x̄)²/(n − 1)] | A measure of the spread of replicate results around their sample mean. |
Relative standard deviation | %RSD = (s/x̄) × 100 | Standard deviation expressed as a percentage of the mean. |
Relative bias | Relative bias (%) = [(x̄ − xref)/xref] × 100 | Compares the mean result with an accepted reference value. The sign indicates the direction of the bias. |
Units
Same as the measured quantity for mean and standard deviation
% for relative standard deviation
% for relative bias
Worked Examples
| Problem | Steps | Answer |
|---|---|---|
A laboratory obtains three replicate results: 9.8, 10.0, and 10.2 mg L⁻¹. Calculate the mean and sample standard deviation. |
| Mean = 10.0 mg L⁻¹, sample standard deviation = 0.20 mg L⁻¹, and %RSD = 2.0%. |
The mean of a method is 9.70 mg L⁻¹, while the accepted reference value is 10.00 mg L⁻¹. Calculate the relative bias. |
| The relative bias is −3.0%, indicating that the method gives a mean result 3.0% below the reference value. |
Applications
Evaluating repeatability of titration measurements.
Checking the performance of spectrophotometric calibration.
Assessing analytical methods using certified reference materials.
Comparing laboratories in proficiency testing.
Monitoring long-term performance of clinical and environmental methods.
Advantages
Separating precision and trueness helps identify the type of measurement problem.
Statistical evaluation provides objective information about repeatability.
Reference materials help investigate systematic bias.
The concepts support method validation and laboratory quality assurance.
Limitations
A small number of replicates may provide an uncertain estimate of precision.
Reference materials may not be available for every analyte and matrix.
A reference value may itself have uncertainty.
Accuracy cannot be established merely by calculating a standard deviation.
Precision estimates depend on the measurement conditions used.
Common Mistakes
Using accuracy and precision as interchangeable terms.
Assuming that closely grouped results must be true.
Assuming that a mean near the reference value proves good precision.
Using a population standard deviation formula when the sample standard deviation is required.
Ignoring the uncertainty of the reference value.
Calling relative standard deviation a direct measure of accuracy.
Learning Objectives
Define accuracy, precision, and trueness.
Differentiate random variation from systematic bias.
Calculate the mean and sample standard deviation of replicate results.
Calculate relative standard deviation and relative bias.
Explain how reference materials help evaluate trueness.
Interpret examples of precise but biased measurements.
Practice Questions
Define precision and trueness.
Explain why a precise method may still be inaccurate.
Differentiate repeatability from reproducibility.
What is the role of a certified reference material?
Three results are 5.1, 5.2, and 5.3 mg L⁻¹. Calculate their mean.
A method gives a mean of 19.6 mg L⁻¹ for a reference value of 20.0 mg L⁻¹. Calculate relative bias.
Explain why standard deviation is not a direct measure of trueness.
Key Takeaways
Precision describes agreement among repeated results.
Trueness describes agreement between the mean result and an accepted reference value.
Accuracy concerns overall closeness to the true value.
A method can be precise but biased.
Both precision and trueness must be considered when evaluating analytical performance.
References
| Title | Authors | Edition | Type | Scope | Publisher | Url |
|---|---|---|---|---|---|---|
Quantitative Chemical Analysis | Daniel C. Harris and Charles A. Lucy | 10th edition | Textbook | Analytical error, precision, bias, and statistical evaluation. | ||
International Vocabulary of Metrology (VIM), JCGM 200:2012 | Metrology reference | Definitions of accuracy, precision, trueness, and measurement concepts. | Joint Committee for Guides in Metrology | https://www.bipm.org/en/committees/jc/jcgm/publications | ||
Eurachem Guide: The Fitness for Purpose of Analytical Methods | Technical guide | Evaluation of precision, trueness, bias, and method performance. | https://eurachem.org/index.php/publications/guides |
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Analytical Chemistry