✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CHE-005-013

Introduction to Analytical Sampling

Analytical sampling is the process of selecting and collecting a portion of a material for chemical examination. It is the first critical stage of an analytical procedure because the laboratory result can represent the original material only when the collected sample is sufficiently representative and its composition remains unchanged.

Explanation

Analytical sampling connects the material being investigated with the portion that is actually measured in the laboratory. In most analytical situations, examining the entire population or bulk material is impractical. Instead, a smaller quantity is selected and analyzed. The analytical result is then used to make conclusions about the original material. This conclusion is scientifically defensible only when the sampling procedure accounts for the material's physical and chemical characteristics. Sampling is particularly important for heterogeneous materials such as soil, ores, food products, sediments, and industrial mixtures. A sample may become unrepresentative because of uneven analyte distribution, particle-size differences, settling, contamination, evaporation, chemical reactions, or inappropriate collection locations. Sampling error is distinct from analytical measurement error: a highly precise instrument cannot correct a sample that was collected incorrectly. Therefore, sampling design, sample collection, preservation, and documentation must be considered integral parts of the complete analytical method.

Variables

SymbolMeaningUnit

x̄

Arithmetic mean of the measurements

Same as the measured quantity

xᵢ

Individual measurement

Same as the measured quantity

n

Number of measurements

Dimensionless

Example or application

A worked example has not yet been added.

Definition

Analytical sampling is the systematic selection and collection of a portion of a material or population for examination so that the analytical findings can provide valid information about the material from which the sample originated.

Purpose

To obtain a suitable test sample that represents the material of interest while preserving the analytes and their relevant chemical or physical properties.

Importance

Sampling determines which portion of the original material enters the analytical process. Errors introduced at this stage can produce biased results that cannot necessarily be corrected by better instruments, repeated measurements, or mathematical calculations.

Key Concepts

  • Population: the complete material or collection of units about which information is required.

  • Sampling unit: an individual portion, object, location, or time interval selected during sampling.

  • Primary sample: material collected directly from the original population.

  • Composite sample: a mixture of several individual samples collected according to a defined plan.

  • Laboratory sample: material submitted to the laboratory for examination.

  • Test sample: material prepared from the laboratory sample for testing.

  • Test portion: the specific quantity taken for an individual analytical determination.

  • Sampling error: uncertainty or bias introduced because the collected material does not perfectly represent the population.

  • Sample integrity: preservation of the sample's relevant properties from collection until analysis.

Principle

The fundamental principle of analytical sampling is that the selected portion must represent the material about which conclusions will be drawn. The sampling strategy must account for spatial or temporal variation, material heterogeneity, analyte distribution, and possible changes during collection and storage. A representative sample does not necessarily mean a large sample; it means a sample selected using a scientifically appropriate procedure.

Working Process

  • Define the analytical objective and identify the property or analyte to be measured.

  • Define the target population, its boundaries, and the material or locations to be represented.

  • Investigate the physical state, heterogeneity, and expected distribution of the analyte.

  • Choose an appropriate sampling design and determine the required number and quantity of increments.

  • Collect the material using suitable equipment and a documented procedure.

  • Label, transport, and preserve the collected material under appropriate conditions.

  • Prepare a representative laboratory sample and obtain the required test portion.

  • Document sampling conditions, deviations, preservation steps, and relevant observations.

Equations

NameExpressionDescriptionConditions

Arithmetic mean of replicate analytical results

x̄ = (Σxᵢ) / n

The arithmetic mean can summarize replicate measurements from a sample, but it does not automatically correct sampling bias or prove that the sample represents the original population.

Applicable when replicate numerical measurements are available and are appropriately combined.

Units

  • Sample mass: g or kg

  • Sample volume: mL or L

  • Sampling depth: cm or m

  • Analyte concentration: mg/kg, mg/L, or other appropriate concentration units

  • Sampling time: s, min, or h

Examples

TitleProblemSolutionLearning Point

Sampling a soil field

A researcher needs to determine the average concentration of a metal in a field. Collecting soil from only one convenient location may not represent the entire field.

The researcher defines the field boundary, divides it into suitable sampling locations, collects several increments from the required depth, and combines or analyzes them according to the sampling objective. The procedure is documented so that the laboratory result can be interpreted in relation to the field.

A laboratory measurement is meaningful only when the collected soil adequately represents the area being investigated.

Sampling drinking water

A laboratory must measure nitrate concentration in a water supply.

The sampling plan identifies the collection point, sampling time, suitable container, required preservation, and transport conditions. The sample is collected without introducing contamination and is analyzed within the method's permitted holding time.

Water sampling must account for location, time, container compatibility, and analyte stability.

Applications

  • Collection of soil and sediment samples for environmental monitoring.

  • Water sampling for drinking-water and wastewater analysis.

  • Collection of food materials for nutritional and contaminant testing.

  • Sampling of ores and mineral materials for industrial quality assessment.

  • Collection of pharmaceutical raw materials and finished products.

  • Clinical specimen collection for laboratory measurements.

Advantages

  • Makes analysis of large material populations practical.

  • Reduces the quantity of material that must be transported and examined.

  • Provides a structured basis for making conclusions about a larger material.

  • Allows sampling uncertainty and representativeness to be evaluated systematically.

Limitations

  • A small sample may fail to represent a highly heterogeneous material.

  • Sampling can introduce contamination or analyte loss.

  • The required sampling quantity and number of increments depend on the material and analytical objective.

  • Sampling uncertainty may be difficult to separate from preparation and measurement uncertainty.

  • A poorly designed sampling plan may produce biased conclusions even when laboratory measurements are accurate.

Common Mistakes

  • Assuming that any small portion of a material represents the entire population.

  • Collecting samples only from convenient or visually unusual locations.

  • Ignoring temporal variation in water, air, or industrial processes.

  • Using containers that react with or contaminate the analyte.

  • Failing to label samples and record collection conditions.

  • Treating repeated instrumental measurements as a substitute for independent sampling.

Prerequisites

  • Basic understanding of chemical analysis.

  • Knowledge of concentration and measurement units.

  • Basic understanding of heterogeneous and homogeneous materials.

Learning Objectives

  • Define analytical sampling and explain its role in chemical analysis.

  • Distinguish a population, sampling unit, laboratory sample, and test portion.

  • Explain why representativeness is essential.

  • Identify major sources of sampling error.

  • Describe the basic stages of a sampling procedure.

  • Explain why sampling and analytical measurement errors are different.

Practice Questions

  • What is analytical sampling, and why is it necessary?

  • What is the difference between a laboratory sample and a test portion?

  • Why can an accurate instrument produce an unreliable result when sampling is poor?

  • Identify three factors that can make a sample unrepresentative.

  • Describe a suitable sampling approach for investigating metal contamination in soil.

  • Why should sample collection and preservation be included in an analytical procedure?

Key Takeaway

The reliability of chemical analysis begins with sampling. A laboratory result can represent the original material only when the sample is appropriately selected, collected, preserved, and prepared.

References

TitleAuthorsTypeRelevanceUrl

Quantitative Chemical Analysis

Daniel C. Harris and Charles A. Lucy

textbook

Fundamental concepts of analytical measurements, sampling, and uncertainty.

Principles of Instrumental Analysis

Douglas A. Skoog, F. James Holler, and Stanley R. Crouch

textbook

Analytical methodology and sample requirements for instrumental measurements.

Eurachem Guide: Measurement Uncertainty Arising from Sampling

technical guide

Evaluation of sampling contributions to measurement uncertainty.

IUPAC Gold Book

terminology reference

https://goldbook.iupac.org/

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Analytical Chemistry