✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CHE-005-015

Representative Sampling

Representative sampling aims to obtain a sample that accurately reflects the relevant characteristics of the original material or population. It is essential when laboratory measurements are used to estimate average composition, detect contaminants, or make decisions about a larger quantity of material.

Explanation

A representative sample preserves the characteristics that matter for the analytical objective. These may include average analyte concentration, particle-size distribution, moisture content, contaminant distribution, or variation between different locations. Representativeness is not an absolute property independent of purpose. A sample that is representative of the average concentration of a large soil area may not be suitable for identifying a small localized contamination hotspot. Similarly, a composite food sample may estimate average composition but cannot reveal variation between individual packages. The principal challenge is heterogeneity. Materials may be heterogeneous at the particle level, between containers, across locations, or over time. Sampling procedures must therefore consider the scale of heterogeneity and the size and number of increments. Segregation, particle-size differences, density differences, and settling can cause certain components to become overrepresented or underrepresented. Sample reduction must also preserve composition. The representativeness of a sample should be supported by a documented sampling design, suitable collection procedures, and, where appropriate, replicate or duplicate sampling.

Variables

SymbolMeaningUnit

x̄

Overall weighted mean

Same as the measured quantity

Nₕ

Population size of stratum h

Number of population units

x̄ₕ

Mean value for stratum h

Same as the measured quantity

x₁, x₂

Two duplicate analytical results

Same as the measured quantity

RPD

Relative percent difference

%

Example or application

A worked example has not yet been added.

Definition

Representative sampling is the collection of a portion of a population that adequately reflects the relevant properties of that population for a clearly defined analytical purpose.

Purpose

To ensure that laboratory findings provide a scientifically valid estimate or description of the material being investigated.

Importance

Representativeness determines whether analytical results can be generalized from the test portion to the original population. It is particularly important when the results support environmental decisions, product acceptance, regulatory compliance, or public-health assessment.

Key Concepts

  • Representativeness: the degree to which a sample reflects relevant population characteristics.

  • Heterogeneity: variation in composition or properties within a material.

  • Homogeneity: uniformity of composition or properties within the relevant scale.

  • Increment: an individual portion collected as part of a sampling plan.

  • Composite sample: a sample formed by combining multiple increments.

  • Sampling bias: systematic deviation caused by the selection or collection procedure.

  • Segregation: separation of components due to differences in particle size, density, shape, or other properties.

  • Target population: the complete material or area about which conclusions are required.

  • Scale of sampling: the spatial, temporal, or physical level at which a sample is intended to represent the population.

Principle

A sample is representative only in relation to a defined population and analytical objective. Its composition should reflect the relevant distribution of the analyte in the target material. When the population is heterogeneous, collecting multiple appropriately distributed increments and combining them under a suitable plan can improve representation of the overall material. However, compositing is unsuitable when local variation must be preserved.

Working Process

  • Define exactly what population and characteristic the sample must represent.

  • Determine whether the objective is an overall average or the detection of localized variation.

  • Investigate likely sources and scales of material heterogeneity.

  • Choose sampling locations and the number of increments to cover relevant variation.

  • Collect increments using consistent and appropriate procedures.

  • Combine increments only when compositing is consistent with the analytical objective.

  • Homogenize and reduce the sample without causing segregation or analyte loss.

  • Evaluate representativeness using replicate sampling, duplicate samples, or other suitable quality checks.

Equations

NameExpressionDescriptionConditions

Weighted population mean for multiple strata

x̄ = Σ(Nₕx̄ₕ) / ΣNₕ

Estimates an overall mean from stratum means when the strata contain different numbers of population units and the stratum means are appropriately estimated.

The population sizes or valid stratum weights must be known.

Relative difference between duplicate results

RPD (%) = |x₁ - x₂| / [(x₁ + x₂) / 2] × 100

Compares two positive duplicate results. It can help assess sampling or analytical reproducibility, depending on how the duplicates were collected.

The duplicate results must be expressed in the same units and their mean must be nonzero.

Units

  • Sample mass: g or kg

  • Analyte concentration: mg/kg, mg/L, or %

  • Sampling depth: cm or m

  • Particle size: µm or mm

  • Relative percent difference: %

Examples

TitleProblemSolutionAnswerLearning Point

Calculating duplicate-sample agreement

Two duplicate samples produce concentrations of 18 mg/kg and 22 mg/kg. Calculate their relative percent difference.

Mean = (18 + 22) / 2 = 20 mg/kg. RPD = |18 - 22| / 20 × 100 = 20%.

The relative percent difference is 20%. Whether this is acceptable depends on the method, material heterogeneity, and established quality-control criteria.

Duplicate agreement provides useful information but does not by itself prove that the samples represent the entire population.

Composite sampling of grain

A grain storage facility contains material from several locations. A single surface sample may not reflect the entire stored quantity.

Collect increments from appropriate locations and depths according to a defined sampling plan. Combine them when the objective is to estimate overall composition, then mix and reduce the material using a suitable procedure.

A composite sample can improve coverage of a bulk material when the analytical objective is an overall estimate.

Applications

  • Determining average contaminant levels in soil.

  • Estimating average nutrient composition in agricultural products.

  • Quality assessment of grain, powders, ores, and bulk chemicals.

  • Monitoring average pollutant concentrations in water bodies.

  • Checking consistency of industrial raw materials and product batches.

Advantages

  • Supports valid conclusions about larger populations.

  • Reduces the risk of misleading results caused by selective collection.

  • Multiple increments can improve coverage of heterogeneous materials.

  • Can support defensible quality-control and regulatory decisions.

Limitations

  • Representativeness depends on the sampling objective and cannot be judged without defining the target population.

  • Small localized contamination may be diluted in a composite sample.

  • Highly heterogeneous materials may require many increments.

  • Segregation can occur during collection, transport, and sample reduction.

  • A representative sample may still undergo chemical changes before analysis.

Common Mistakes

  • Assuming a large sample is automatically representative.

  • Collecting several increments from nearly identical locations.

  • Combining samples when local differences are important.

  • Ignoring particle-size and density segregation.

  • Confusing good duplicate agreement with proof of representativeness.

  • Failing to define the population and analytical objective.

Prerequisites

  • Introduction to analytical sampling.

  • Sampling techniques and strategies.

  • Basic concepts of averages and variability.

Learning Objectives

  • Define representative sampling.

  • Explain how heterogeneity affects sample representativeness.

  • Distinguish overall-average sampling from hotspot detection.

  • Explain the role of increments and composite samples.

  • Calculate relative percent difference between duplicate results.

  • Identify conditions that can make a representative sampling plan fail.

Practice Questions

  • What makes a sample representative?

  • Why must representativeness be considered in relation to the analytical objective?

  • How can particle-size segregation affect a bulk powder sample?

  • When is composite sampling useful, and when can it be misleading?

  • Calculate the RPD for duplicate results of 35 mg/kg and 40 mg/kg.

  • Why does good agreement between duplicate samples not necessarily prove population representativeness?

Key Takeaway

Representative sampling is not simply collecting a portion of material. It requires a sampling design that reflects the target population at the scale relevant to the analytical question.

References

TitleAuthorsTypeRelevance

Quantitative Chemical Analysis

Daniel C. Harris and Charles A. Lucy

textbook

Sampling and analytical uncertainty.

Eurachem Guide: Measurement Uncertainty Arising from Sampling

technical guide

Representativeness and sampling uncertainty.

ISO 18400 Series: Soil Quality — Sampling

international standard series

Representative soil sampling procedures.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Analytical Chemistry