Analytical samples often contain mixtures of dissolved substances, suspended particles, precipitates, droplets, or biological material. Separation is used to isolate the fraction required for measurement or remove components that interfere with the analytical method. Filtration passes a mixture through a porous medium that retains particles larger than the effective pore structure while allowing liquid or gas to pass. The result depends on filter material, pore size, particle properties, pressure, and interactions between the analyte and filter. Centrifugation uses rotational motion to accelerate sedimentation according to differences in particle density and size relative to the surrounding fluid. Larger or denser particles generally sediment more rapidly under comparable conditions. Other separation methods include decantation, sedimentation, membrane separation, and phase separation. These methods are not interchangeable in every situation. For example, filtration may be suitable for removing suspended particles from water, while centrifugation may be more appropriate for separating fine particles or biological cells. Separation can also change the operational definition of the analyte. A filtered water sample may represent a dissolved fraction under the specified filtration conditions, whereas an unfiltered, digested sample may represent a different fraction. Therefore, the separation procedure must be selected according to the analytical objective and documented precisely.
Filtration, Centrifugation, and Separation
Filtration, centrifugation, and related separation techniques are used to separate components of a sample based on differences in particle size, density, or other physical and chemical properties. They are important for removing suspended material, isolating fractions, and preparing samples for subsequent analysis.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
RCF | Relative centrifugal force | Dimensionless multiple of gravitational acceleration |
r | Distance from the rotation axis | cm in the stated RCF equation |
RPM | Rotational speed | revolutions per minute |
v | Particle settling velocity | m/s |
d | Particle diameter | m |
ρp | Particle density | kg/m³ |
ρf | Fluid density | kg/m³ |
g | Gravitational acceleration | m/s² |
η | Dynamic viscosity | Pa·s |
Example or application
A worked example has not yet been added.
Definition
Filtration separates particles from a fluid using a porous medium, centrifugation accelerates particle separation through centrifugal motion, and separation is the broader process of isolating components based on differences in their physical or chemical properties.
Purpose
To remove unwanted suspended matter, isolate desired fractions, clarify samples, and prepare materials for accurate chemical or instrumental analysis.
Importance
Suspended particles and mixed phases can interfere with measurements, block instruments, scatter light, or alter analyte concentration. Suitable separation produces a fraction that matches the analytical objective.
Key Concepts
Filtrate: fluid that passes through a filter.
Retentate: material retained by a filter or membrane.
Filter medium: porous material used for filtration.
Pore size: nominal or effective opening characteristic of a filter.
Sedimentation: movement of particles through a fluid under gravity or an applied acceleration.
Centrifugation: separation using centrifugal acceleration.
Pellet: material collected at the bottom or outer region of a centrifuge vessel.
Supernatant: liquid above the sediment or pellet.
Relative centrifugal force: centrifugal acceleration expressed relative to gravitational acceleration.
Membrane filtration: separation using a membrane with defined properties.
Decantation: separation by carefully pouring off a liquid from settled material.
Principle
Filtration relies on physical retention by a porous barrier, while centrifugation accelerates sedimentation by applying a centrifugal field. Separation efficiency depends on particle size, density, fluid viscosity, filter properties, operating conditions, and possible interactions between the analyte and separation material.
Working Process
Define the fraction required for analysis, such as dissolved analyte, suspended solids, or a clarified liquid.
Assess particle size, sample viscosity, analyte stability, and possible interactions with filter materials.
Select a suitable filtration or centrifugation method.
Choose compatible filters, membranes, tubes, and other equipment.
Perform the separation under controlled conditions.
Collect the required filtrate, retentate, pellet, or supernatant without cross-contamination.
Record the separation conditions, including filter specification or centrifugation settings.
Preserve the separated fraction according to the analytical method.
Check for analyte adsorption, incomplete separation, or contamination when necessary.
Equations
| Name | Expression | Description | Conditions |
|---|---|---|---|
Relative centrifugal force | RCF = 1.118 × 10⁻⁵ × r × RPM² | Calculates centrifugal acceleration relative to gravitational acceleration when r is expressed in centimetres and rotational speed in revolutions per minute. | The radius must be measured from the rotation axis to the sample location used for the calculation. |
Stokes' settling velocity | v = [d²(ρp - ρf)g] / (18η) | Estimates the terminal settling velocity of a small spherical particle in a Newtonian fluid under laminar-flow conditions. | Assumes spherical particles, low Reynolds number, dilute suspension, and negligible particle interactions. |
Units
Filter pore size: µm or nm
Centrifuge speed: rpm
Relative centrifugal force: × g
Particle diameter: µm or m
Density: kg/m³
Viscosity: Pa·s
Settling velocity: m/s
Examples
| Title | Problem | Solution | Answer | Learning Point |
|---|---|---|---|---|
Calculating relative centrifugal force | A centrifuge operates at 3,000 rpm with a rotor radius of 10 cm. Calculate the relative centrifugal force. | RCF = 1.118 × 10⁻⁵ × 10 × 3000² = 1006.2. | The relative centrifugal force is approximately 1,006 × g. | The same rpm can produce different centrifugal forces in rotors with different radii. |
Selecting a filtration approach | A water sample contains visible suspended particles, but the laboratory needs to measure the operationally defined dissolved fraction of a metal. | The sample should be filtered using the filter specification required by the analytical method. The filtrate is collected in a suitable container and preserved according to the method. The filter type and filtration conditions are documented. | Filtration defines the fraction being measured and must not be treated as an arbitrary preliminary step. |
Applications
Clarification of water samples before instrumental analysis.
Separation of precipitates in gravimetric analysis.
Isolation of cells and biological components.
Preparation of liquid samples for chromatography.
Removal of suspended solids from industrial process samples.
Separation of fine particles from liquid suspensions.
Advantages
Filtration is simple and widely applicable.
Centrifugation can separate fine particles that settle slowly under gravity.
Membrane filtration can provide controlled size-based separation.
Separation can protect analytical instruments from particulate interference.
Limitations
Analytes may adsorb onto filter materials.
Very fine particles may pass through some filters.
Filters can become blocked by high particulate loads.
Centrifugation may not separate particles with similar sedimentation behavior.
Filtration and centrifugation may change the operationally defined analyte fraction.
Improper transfer can cause sample loss or contamination.
Common Mistakes
Choosing filter pore size without considering the analytical definition of the fraction.
Assuming filtration removes all dissolved or colloidal material.
Ignoring adsorption of analytes onto the filter.
Reporting rpm as though it were the same as relative centrifugal force.
Failing to balance centrifuge tubes according to equipment requirements.
Discarding the wrong fraction, such as the pellet instead of the supernatant.
Failing to record filter type and centrifugation conditions.
Prerequisites
Introduction to analytical sampling.
Basic properties of particles and fluids.
Understanding of density, viscosity, and concentration.
Learning Objectives
Explain the principles of filtration and centrifugation.
Distinguish filtrate, retentate, pellet, and supernatant.
Calculate relative centrifugal force from rpm and rotor radius.
Explain the factors affecting particle sedimentation.
Select a separation technique for a defined analytical purpose.
Explain how filtration can define an operationally measured fraction.
Practice Questions
What is the difference between filtrate and retentate?
Explain how centrifugation separates particles from a liquid.
A centrifuge operates at 4,000 rpm with a rotor radius of 8 cm. Calculate RCF.
Why is rpm alone insufficient to compare centrifugal force between different rotors?
What factors influence particle settling velocity?
Why must filter material be selected carefully for trace-element analysis?
Key Takeaway
Filtration and centrifugation separate sample components through different physical mechanisms. The selected method and collected fraction must match the analytical objective because separation can influence the reported analyte concentration.
References
| Title | Authors | Type | Relevance |
|---|---|---|---|
Quantitative Chemical Analysis | Daniel C. Harris and Charles A. Lucy | textbook | Analytical separation and sample preparation. |
Principles of Instrumental Analysis | Douglas A. Skoog, F. James Holler, and Stanley R. Crouch | textbook | Separation principles and instrumental sample requirements. |
Standard Methods for the Examination of Water and Wastewater | APHA, AWWA, and WEF | standard analytical reference | Water sample handling and separation. |
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Analytical Chemistry