✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CHE-005-050

Acid–Base Titration

Acid–base titration is a volumetric method used to determine the concentration of an acid or base through a neutralization reaction with a standard solution of known concentration.

Explanation

In an acid–base titration, a measured volume of an analyte solution is placed in a flask and a standard acid or base solution is delivered from a burette. The titrant reacts with the analyte according to an acid–base neutralization reaction. The titration is continued until the equivalence point is reached, where the acid and base have reacted in their stoichiometric proportions. An indicator or a pH meter can be used to identify the endpoint experimentally. The endpoint should be close to the equivalence point so that the measured titrant volume accurately represents the amount of analyte. The shape of the pH-versus-volume titration curve depends on the strengths of the acid and base, their concentrations, and the chemical equilibria in the solution.

Variables

SymbolMeaningUnit

Cₐ

Concentration of analyte

mol L⁻¹

Vₐ

Volume of analyte

L

Cₜ

Concentration of titrant

mol L⁻¹

Vₜ

Volume of titrant at equivalence

L

a

Stoichiometric coefficient of analyte

Dimensionless

t

Stoichiometric coefficient of titrant

Dimensionless

Example or application

A worked example has not yet been added.

Definition

Acid–base titration is a volumetric analytical technique in which an acid reacts with a base, or a base reacts with an acid, to determine the concentration of an unknown solution.

Purpose

To determine the concentration or amount of an acidic or basic substance by measuring the volume of a standard solution required for neutralization.

Importance

Acid–base titration is one of the most widely used quantitative analytical methods. It is used in chemical laboratories, water analysis, food testing, pharmaceutical quality control, and the standardization of acid and base solutions.

Key Concepts

  • The analyte is the solution whose concentration is being determined.

  • The titrant is the standard solution delivered from the burette.

  • Neutralization involves the reaction of acidic and basic species.

  • The equivalence point occurs when the reactants have combined in their stoichiometric proportions.

  • The endpoint is the experimentally detected signal used to stop the titration.

  • An indicator changes colour over a characteristic pH transition range.

  • A titration curve represents pH as a function of the volume of titrant added.

Principle

The amount of acid chemically equivalent to the amount of base is related through the balanced neutralization equation. Measuring the titrant volume and knowing its concentration allow the amount of analyte to be calculated.

Working Process

  • Rinse and fill a burette with a suitable standard acid or base solution.

  • Use a pipette to transfer a known volume of analyte into a clean conical flask.

  • Add a few drops of a suitable acid–base indicator, or place the flask in a pH measurement arrangement.

  • Record the initial burette reading.

  • Add titrant while mixing the flask continuously.

  • Near the endpoint, add titrant slowly, preferably dropwise.

  • Stop when the indicator gives a persistent endpoint colour or the selected instrumental endpoint is reached.

  • Record the final burette reading and calculate the volume delivered.

  • Repeat the titration until sufficiently concordant measurements are obtained.

  • Calculate the analyte concentration using the balanced reaction.

Equations

NameExpressionDescription

General neutralization reaction

H⁺ + OH⁻ → H₂O

The net ionic equation for the neutralization of hydrogen ions by hydroxide ions in aqueous solution.

Stoichiometric titration relationship

CₐVₐ / a = CₜVₜ / t

For a reaction aA + tT → products, this relationship applies at equivalence when A and T are the analyte and titrant and both concentrations refer to the reacting species.

Units

  • Concentration: mol L⁻¹

  • Volume: mL or L

  • Amount of substance: mol or mmol

  • pH: dimensionless

Examples

  • A 25.00 mL sample of hydrochloric acid is titrated with 0.1000 mol L⁻¹ sodium hydroxide. If 20.00 mL of sodium hydroxide is required, the 1:1 reaction gives C(HCl) = (0.1000 × 20.00) / 25.00 = 0.08000 mol L⁻¹.

Applications

  • Determination of hydrochloric acid and sodium hydroxide concentrations.

  • Measurement of acidity in vinegar and other food products.

  • Determination of alkalinity in water.

  • Quality control of acidic and basic chemical products.

  • Determination of acid-neutralizing capacity in suitable samples.

Advantages

  • Uses relatively simple laboratory equipment.

  • Can provide accurate results with properly standardized solutions.

  • Suitable for many aqueous acid–base systems.

  • Can be monitored visually with indicators or instrumentally with a pH meter.

Limitations

  • The reaction must be sufficiently complete and have known stoichiometry.

  • Weak acids or bases may produce less distinct pH changes near equivalence.

  • Coloured or turbid samples may make visual indicator endpoints difficult to observe.

  • Other acidic or basic substances in the sample may contribute to the measured result.

  • Carbon dioxide absorption can affect some alkaline solutions.

Common Mistakes

  • Choosing an indicator whose transition range does not match the titration curve.

  • Reading the burette at an incorrect eye level.

  • Adding titrant too quickly near the endpoint.

  • Forgetting to subtract the initial burette reading from the final reading.

  • Using an incorrect balanced reaction or stoichiometric ratio.

  • Failing to rinse the burette with the titrant before filling it.

Prerequisites

  • Acid–base concepts and neutralization reactions.

  • Molar concentration and dilution.

  • Balanced chemical equations.

  • Mole calculations and stoichiometry.

  • Basic use of burettes and pipettes.

Learning Objectives

  • Explain the principle of acid–base titration.

  • Identify analyte, titrant, endpoint, and equivalence point.

  • Describe the correct procedure for carrying out a titration.

  • Calculate an unknown concentration from titration data.

  • Explain why indicator selection and reaction stoichiometry matter.

Practice Questions

  • What is acid–base titration?

  • Distinguish the endpoint from the equivalence point.

  • Why must the titrant concentration be known accurately?

  • A 20.00 mL acid sample requires 15.00 mL of 0.2000 mol L⁻¹ NaOH in a 1:1 reaction. Calculate the acid concentration.

  • Why should titrant be added dropwise near the endpoint?

Key Takeaway

Acid–base titration determines an unknown concentration by measuring the volume of a standard acid or base needed to reach a stoichiometric neutralization point.

References

TitleTypeUrl

Harris, Quantitative Chemical Analysis

textbook

Skoog, West, Holler and Crouch, Fundamentals of Analytical Chemistry

textbook

IUPAC Gold Book

terminology reference

https://goldbook.iupac.org/

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Analytical Chemistry