✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CHE-005-058

Iodometric and Iodimetric Titrations

Iodimetry and iodometry are related redox titration methods involving iodine. Iodimetry directly titrates reducing agents with standard iodine, whereas iodometry indirectly determines oxidizing agents by measuring the iodine they liberate from iodide.

Explanation

Iodine participates in a reversible redox couple involving iodide. In iodimetry, iodine solution is used directly as the titrant to oxidize a reducing analyte. In iodometry, an oxidizing analyte reacts with excess iodide to liberate iodine, and the released iodine is then titrated with standard sodium thiosulfate. Starch is commonly used as an indicator because it forms an intense blue complex with iodine. In iodometric titration, starch is generally added near the endpoint, when the iodine concentration has become low, to avoid difficulties associated with a strongly bound iodine–starch complex. Iodine has limited solubility in water, so standard iodine solutions are commonly prepared in the presence of excess iodide, which forms soluble triiodide. Iodine solutions should be protected from conditions that promote loss or change in concentration, and their actual concentration should be established by appropriate standardization.

Variables

SymbolMeaningUnit

I₂

Molecular iodine

Not applicable

I⁻

Iodide ion

Not applicable

S₂O₃²⁻

Thiosulfate ion

Not applicable

S₄O₆²⁻

Tetrathionate ion

Not applicable

C

Molar concentration of titrant

mol L⁻¹

V

Titrant volume

L

Example or application

A worked example has not yet been added.

Definition

Iodimetry is a direct redox titration using iodine as the titrant, while iodometry is an indirect redox titration in which iodine liberated by an oxidizing analyte is titrated with a reducing standard solution.

Purpose

To determine reducing agents by direct iodine titration or oxidizing agents by measuring the iodine they liberate from iodide.

Importance

These methods are widely used in the analysis of oxidizing and reducing substances, including copper(II), chlorine-based oxidants, dissolved oxygen in established procedures, and suitable food or pharmaceutical analytes.

Key Concepts

  • Iodine is reduced to iodide by accepting electrons.

  • Iodide is oxidized to iodine by losing electrons.

  • Iodimetry is a direct titration with iodine.

  • Iodometry is an indirect titration of iodine liberated by an oxidizing analyte.

  • Sodium thiosulfate is a common titrant for iodine in iodometric analysis.

  • Starch forms a deep-blue complex with iodine and is used as an indicator.

  • Excess iodide increases iodine solubility by forming triiodide.

Principle

The iodine/iodide redox couple is used to establish a quantitative electron-transfer relationship. In direct iodimetry, iodine oxidizes the analyte. In iodometry, the analyte first liberates iodine from iodide, and the iodine is subsequently reduced by thiosulfate.

Working Process

  • For iodimetry, prepare and standardize an iodine solution and transfer a measured analyte portion into a flask.

  • Add the iodine titrant gradually while mixing until the selected endpoint is reached.

  • For iodometry, react the oxidizing analyte with an appropriate excess of iodide under controlled conditions.

  • Allow iodine to be liberated quantitatively according to the reaction.

  • Titrate the liberated iodine with standardized sodium thiosulfate.

  • When the solution becomes pale yellow, add starch indicator.

  • Continue titrating until the blue colour disappears.

  • Record the titrant volume and calculate the analyte amount from the balanced reactions.

Equations

NameExpressionDescription

Iodine reduction

I₂ + 2e⁻ → 2I⁻

Iodine accepts two electrons to form iodide.

Thiosulfate oxidation

2S₂O₃²⁻ → S₄O₆²⁻ + 2e⁻

Two thiosulfate ions are oxidized to tetrathionate while releasing two electrons.

Iodine titration with thiosulfate

I₂ + 2S₂O₃²⁻ → 2I⁻ + S₄O₆²⁻

One mole of iodine reacts with two moles of thiosulfate.

Iodine formation from iodide

Oxidant + I⁻ → Reduced oxidant + I₂

A general representation; the balanced coefficients depend on the specific oxidizing analyte.

Units

  • Concentration: mol L⁻¹

  • Volume: mL or L

  • Amount of substance: mol or mmol

Examples

  • In an iodometric titration, 0.00400 mol of liberated I₂ requires 0.00800 mol of S₂O₃²⁻ because the reaction ratio is 1:2.

  • A suitable oxidizing analyte may liberate iodine from excess iodide. The iodine is then titrated with thiosulfate, and the original analyte amount is calculated using both balanced reaction steps.

Applications

  • Determination of copper(II) through iodine liberation.

  • Measurement of available chlorine in suitable disinfectant samples.

  • Determination of oxidizing agents in industrial products.

  • Analysis of reducing substances by direct iodimetry.

  • Iodometric determination of dissolved oxygen in established water-analysis procedures.

Advantages

  • Iodine reactions have useful and well-established stoichiometry.

  • The starch endpoint is highly visible in suitable solutions.

  • Both oxidizing and reducing analytes can be determined using related procedures.

  • The method can be adapted to many chemical systems.

Limitations

  • Iodine can be volatile and solutions require suitable storage.

  • Iodine solutions may be affected by light and changes in composition.

  • Other oxidizing or reducing substances can interfere.

  • The starch endpoint can be affected by inappropriate timing of indicator addition.

  • The analyte must liberate or react with iodine quantitatively under the selected conditions.

Common Mistakes

  • Confusing direct iodimetry with indirect iodometry.

  • Adding starch too early in an iodometric titration when iodine concentration is still high.

  • Failing to account for the 1:2 iodine-to-thiosulfate mole ratio.

  • Allowing iodine to escape or remain exposed for an unnecessarily long time.

  • Ignoring side reactions involving iodide or iodine.

Prerequisites

  • Redox reactions and half-reactions.

  • Oxidizing and reducing agents.

  • Molar concentration and stoichiometry.

  • Indicator behaviour in titrations.

Learning Objectives

  • Distinguish iodimetry from iodometry.

  • Explain the role of iodine and iodide in redox analysis.

  • Write the iodine–thiosulfate reaction.

  • Explain the function and timing of starch indicator.

  • Calculate analyte amounts from iodine titration data.

Practice Questions

  • What is the main difference between iodimetry and iodometry?

  • Why is excess iodide used when preparing iodine solutions?

  • Write the balanced reaction between iodine and thiosulfate.

  • Why is starch usually added near the endpoint in iodometric titration?

  • How many moles of thiosulfate are required to react with 0.00300 mol of iodine?

Key Takeaway

Iodimetry directly uses iodine to titrate reducing agents, whereas iodometry measures iodine released by oxidizing agents and commonly titrates it with sodium thiosulfate.

References

TitleType

Harris, Quantitative Chemical Analysis

textbook

Skoog, West, Holler and Crouch, Fundamentals of Analytical Chemistry

textbook

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Analytical Chemistry