In precipitation gravimetry, the analyte is converted into a sparingly soluble compound that can be separated from the solution and weighed. The precipitating reagent should react selectively and produce a solid with a known chemical composition. Precipitation conditions influence particle size, purity, filterability, and the extent of co-precipitation. Slow addition of precipitating reagent with adequate mixing, controlled pH, suitable temperature, and appropriate reagent concentration can help produce a more manageable precipitate. The precipitate may be digested to improve its physical properties, then filtered, washed, dried or ignited, and weighed. The mass of the final compound is related to the original analyte amount through its chemical formula and the reaction stoichiometry. A gravimetric factor is used to convert the measured mass of the weighed form into the mass of the analyte.
Gravimetric Analysis and Precipitate Formation
Gravimetric analysis is a quantitative method in which an analyte is converted into a compound of known composition, isolated, and weighed. Precipitation gravimetry is a major form of this method.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
GF | Gravimetric factor | Dimensionless |
m_analyte | Mass of analyte | g |
m_weighing form | Mass of final compound weighed | g |
M_analyte | Molar mass of analyte or analyte unit | g mol⁻¹ |
M_weighing form | Molar mass of final weighing compound | g mol⁻¹ |
a | Stoichiometric coefficient of analyte | Dimensionless |
b | Stoichiometric coefficient of weighing form | Dimensionless |
m_sample | Original sample mass | g |
Example or application
A worked example has not yet been added.
Definition
Gravimetric analysis is a quantitative analytical method in which the amount of analyte is determined from the mass of a pure compound of known composition that contains the analyte.
Purpose
To determine analyte quantity from the mass of an isolated compound with known chemical composition.
Importance
Gravimetric analysis can provide highly accurate results without requiring calibration against an instrumental response. It is also valuable as a reference method and for checking other quantitative procedures.
Key Concepts
The analyte is the substance being determined.
The precipitating reagent converts the analyte into a sparingly soluble compound.
Precipitate composition must be known and sufficiently pure.
Particle size affects filtration, washing, and contamination.
Co-precipitation can introduce impurities into the collected solid.
Digestion can improve precipitate filterability and purity.
The gravimetric factor connects the mass of the weighed form to the mass of the analyte.
Principle
The analyte is converted quantitatively into a stable compound of known composition. After separation and appropriate treatment, the compound is weighed and its mass is converted into the analyte amount using stoichiometry.
Working Process
Weigh or measure a representative sample accurately.
Dissolve the sample using a suitable solvent or digestion procedure.
Adjust the solution conditions to favour selective precipitation.
Add the precipitating reagent slowly with stirring.
Allow the precipitate to form and, when appropriate, digest it in the mother liquor.
Filter the precipitate using a suitable filtration medium.
Wash the solid to remove soluble impurities without causing significant dissolution or peptization.
Dry or ignite the precipitate to obtain the specified weighing form.
Cool the material in a desiccator when appropriate and weigh it accurately.
Repeat drying or ignition and weighing until constant mass is achieved according to the method.
Calculate analyte mass or percentage using the gravimetric factor.
Equations
| Name | Expression | Description |
|---|---|---|
Gravimetric factor | GF = (a × M_analyte) / (b × M_weighing form) | For a balanced relationship in which a moles of analyte correspond to b moles of weighing form, the gravimetric factor converts weighing-form mass into analyte mass. |
Analyte mass | m_analyte = m_weighing form × GF | The mass of analyte is obtained by multiplying the measured mass of the final weighing form by the gravimetric factor. |
Mass percentage | % analyte = (m_analyte / m_sample) × 100 | The analyte mass is expressed as a percentage of the original sample mass. |
Units
Mass: g or mg
Molar mass: g mol⁻¹
Gravimetric factor: dimensionless
Mass percentage: %
Examples
A sample containing sulfate is converted into barium sulfate, BaSO₄. The mole ratio between sulfate and barium sulfate is 1:1. If 0.2333 g of BaSO₄ is obtained, the sulfate mass is calculated using the ratio of the molar mass of SO₄²⁻ to the molar mass of BaSO₄: 0.2333 × (96.06 / 233.39) ≈ 0.09603 g sulfate.
Applications
Determination of sulfate by precipitation as barium sulfate.
Determination of chloride by precipitation as silver chloride.
Determination of nickel using suitable precipitating reagents.
Analysis of metal and mineral content in ores.
Reference measurements for evaluating other analytical methods.
Advantages
Can achieve high accuracy with careful technique.
Does not require an instrumental calibration curve for the mass measurement itself.
Relies on well-defined chemical composition and stoichiometry.
Can be used as a reference procedure for suitable analytes.
Limitations
Often requires substantial time for precipitation, digestion, filtration, drying, or ignition.
Small precipitate masses can make weighing uncertainty significant.
Co-precipitation and incomplete precipitation can introduce systematic errors.
The analyte must be converted into a stable, weighable compound.
Interfering substances may need to be removed before precipitation.
Common Mistakes
Adding precipitating reagent too rapidly and producing very fine particles.
Failing to control pH or temperature during precipitation.
Washing with a liquid that dissolves too much precipitate.
Weighing a precipitate that has not reached the specified stable composition.
Ignoring co-precipitation and contamination.
Using an incorrect gravimetric factor or molar mass.
Prerequisites
Chemical precipitation and solubility.
Molar mass and stoichiometry.
Chemical equilibrium.
Analytical balance use.
Filtration and drying techniques.
Learning Objectives
Define gravimetric analysis.
Explain the requirements of a suitable precipitate.
Describe how precipitation conditions influence particle properties.
Calculate analyte mass using a gravimetric factor.
Identify sources of error in precipitation gravimetry.
Practice Questions
What is precipitation gravimetry?
Why should a precipitate have a known chemical composition?
What is co-precipitation?
How does the gravimetric factor connect the weighed compound to the analyte?
A 0.5000 g sample produces 0.3000 g of a weighing form with a gravimetric factor of 0.4000. Calculate the analyte mass and percentage.
Key Takeaway
Precipitation gravimetry determines analyte quantity by converting it into a pure, stable, weighable compound and applying the stoichiometric relationship between the compound and the analyte.
References
| Title | Type | Url |
|---|---|---|
Harris, Quantitative Chemical Analysis | textbook | |
Skoog, West, Holler and Crouch, Fundamentals of Analytical Chemistry | textbook | |
IUPAC Gold Book | terminology reference | https://goldbook.iupac.org/ |
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Analytical Chemistry