✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CHE-005-082

Beer–Lambert Law

The Beer–Lambert law describes the relationship between the absorbance of a solution, the concentration of the absorbing species, and the optical path length.

Explanation

When monochromatic radiation passes through a homogeneous absorbing solution under suitable conditions, the absorbance is proportional to the concentration of the absorbing species and the distance travelled through the solution. The law is widely used for quantitative UV–Visible analysis. Absorbance is calculated from the ratio of incident to transmitted radiation. The proportionality constant is the molar absorption coefficient when concentration is expressed in molarity and path length in centimetres. Deviations may occur at high concentrations, with polychromatic radiation, chemical changes, stray light, or instrumental limitations.

Variables

SymbolMeaningUnit

A

Absorbance

Dimensionless

ε

Molar absorption coefficient

L mol⁻¹ cm⁻¹

l

Optical path length

cm

c

Concentration of absorbing species

mol L⁻¹

I₀

Incident radiation intensity

Instrument-dependent intensity unit

I

Transmitted radiation intensity

Same as I₀

T

Transmittance

Dimensionless

Example or application

A worked example has not yet been added.

Definition

The Beer–Lambert law states that the absorbance of a suitable absorbing sample is proportional to the concentration of the absorbing species and the optical path length.

Purpose

To calculate the concentration of absorbing substances from measured absorbance or to determine an absorption coefficient.

Importance

It provides the mathematical foundation for many quantitative absorption measurements, especially UV–Visible spectrophotometry.

Key Concepts

  • Absorbance

  • Transmittance

  • Molar absorption coefficient

  • Optical path length

  • Concentration

  • Monochromatic radiation

  • Calibration curve

  • Linear analytical range

  • Deviations from linearity

Principle

Each absorbing species contributes to the attenuation of radiation. Under appropriate conditions, the total absorbance increases linearly with the concentration of the absorbing species and the path length.

Working Process

  • Select a wavelength where the analyte absorbs suitably.

  • Prepare a blank and appropriate calibration standards.

  • Place the blank in the instrument and establish the reference signal.

  • Measure the absorbance of the standards using a known path length.

  • Construct a calibration curve of absorbance against concentration.

  • Measure the sample absorbance under the same conditions.

  • Determine the unknown concentration from the calibration relationship.

Equations

NameFormulaDescription

Beer–Lambert law

A = εlc

Absorbance equals molar absorption coefficient multiplied by path length and concentration.

Absorbance and transmittance

A = −log₁₀(T) = log₁₀(I₀/I)

Absorbance is the negative base-10 logarithm of transmittance.

Transmittance

T = I/I₀

The fraction of incident radiation transmitted through the sample.

Units

  • Absorbance: dimensionless

  • Concentration: mol L⁻¹

  • Path length: cm

  • Molar absorption coefficient: L mol⁻¹ cm⁻¹

  • Transmittance: dimensionless or percentage

Examples

  • A solution with an absorbance of 0.50 has a transmittance of approximately 0.316.

  • If ε = 100 L mol⁻¹ cm⁻¹, l = 1 cm, and c = 0.002 mol L⁻¹, then A = 0.20.

  • A series of standard dye solutions can be used to construct an absorbance-versus-concentration calibration curve.

Applications

  • Determination of dye concentrations

  • Measurement of pharmaceutical compounds

  • Analysis of metal complexes

  • Quantification of proteins and nucleic acids using suitable assays

  • Monitoring reaction progress

Advantages

  • Simple mathematical relationship

  • Suitable for rapid quantitative measurements

  • Can provide good precision within a validated linear range

  • Requires relatively small sample volumes in many instruments

Limitations

  • The law is not perfectly linear under all concentration conditions

  • Chemical equilibria can change the concentration of the absorbing species

  • Turbidity and scattering can affect measured absorbance

  • Stray light and polychromatic radiation can cause deviations

  • The sample must be suitable for the selected wavelength and optical system

Common Mistakes

  • Using percentage transmittance directly as absorbance

  • Forgetting to use consistent units for path length and concentration

  • Assuming the law remains linear at every concentration

  • Ignoring the blank correction

  • Using an unsuitable wavelength for the analyte

Prerequisites

  • Absorption spectroscopy

  • Logarithms

  • Concentration calculations

  • Basic UV–Visible spectrophotometry

Learning Objectives

  • State the Beer–Lambert law

  • Calculate absorbance from transmittance

  • Calculate concentration using absorbance and molar absorption coefficient

  • Explain the role of path length

  • Identify common causes of deviations from linearity

Practice Questions

  • State and explain the Beer–Lambert law.

  • What is the relationship between absorbance and transmittance?

  • Calculate the absorbance when transmittance is 25%.

  • A solution has ε = 200 L mol⁻¹ cm⁻¹, l = 1 cm, and A = 0.40. Find its concentration.

  • List four causes of deviations from the Beer–Lambert law.

Key Takeaway

Under suitable conditions, absorbance is directly proportional to concentration and optical path length, making the Beer–Lambert law fundamental to quantitative absorption spectroscopy.

References

TitleTypeUrl

Skoog, Holler and Crouch, Principles of Instrumental Analysis

textbook

Harris, Quantitative Chemical Analysis

textbook

IUPAC Gold Book

terminology reference

https://goldbook.iupac.org/

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Analytical Chemistry