Atomic absorption spectroscopy is an elemental analytical technique. The sample is converted into free atoms, commonly using a flame or an electrothermal atomizer. A radiation source, often a hollow cathode lamp designed for the target element, provides characteristic wavelengths. Ground-state atoms absorb radiation at specific atomic transitions. The decrease in radiation intensity is measured and related to the concentration of the element through calibration. AAS is widely used for measuring metals and selected metalloids in environmental, biological, food, and industrial samples.
Atomic Absorption Spectroscopy (AAS)
Atomic absorption spectroscopy determines the concentration of elements by measuring the absorption of characteristic radiation by free ground-state atoms.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
A | Measured absorbance | Dimensionless |
I₀ | Incident radiation intensity | Instrument-dependent |
I | Transmitted radiation intensity | Same as I₀ |
C | Element concentration | mg L⁻¹, µg L⁻¹, or mol L⁻¹ |
k | Empirical proportionality constant | Depends on concentration unit |
m | Calibration slope | Absorbance per concentration unit |
b | Calibration intercept | Absorbance |
Example or application
A worked example has not yet been added.
Definition
Atomic absorption spectroscopy is an analytical method that measures the absorption of element-specific radiation by free atoms in the gas phase.
Purpose
To determine the concentration of specific elements, particularly metals, in prepared samples.
Importance
AAS provides a relatively selective and established method for elemental analysis in laboratories that require reliable metal measurements.
Key Concepts
Free atoms
Ground-state atoms
Atomic absorption lines
Hollow cathode lamp
Atomization
Flame atomization
Electrothermal atomization
Monochromator
Detector
Background correction
Calibration standards
Principle
Free ground-state atoms absorb radiation at characteristic wavelengths corresponding to electronic transitions. Under controlled conditions, the measured absorption is related to the number of absorbing atoms and therefore to the element concentration.
Working Process
Prepare the sample using an appropriate digestion or dilution procedure.
Select the target element and its characteristic radiation source.
Introduce the sample into a flame or electrothermal atomizer.
Convert the analyte into free gas-phase atoms.
Pass characteristic radiation through the atomized sample.
Measure the decrease in radiation intensity.
Use background correction where necessary.
Determine the analyte concentration using calibration standards.
Equations
| Name | Formula | Description |
|---|---|---|
Absorbance | A = log₁₀(I₀/I) | Relates incident and transmitted radiation intensities. |
Beer–Lambert-type relationship | A = kC | A simplified calibration relationship under suitable controlled conditions; k is an empirical proportionality constant. |
Calibration equation | A = mC + b | An empirical linear calibration relationship for the analyte. |
Units
Wavelength: nm
Concentration: mg L⁻¹ or µg L⁻¹
Absorbance: dimensionless
Sample mass: g or mg
Sample volume: mL or L
Examples
Lead concentration in a prepared environmental sample can be measured using an appropriate AAS method.
Calcium and magnesium can be determined in water samples.
Iron and copper concentrations can be measured in food or industrial materials after suitable preparation.
Applications
Heavy-metal analysis in water and soil
Measurement of metals in food products
Clinical and biological elemental analysis
Pharmaceutical impurity testing
Metal determination in industrial materials
Advantages
Good selectivity for the target element
Established methods are available for many metals
Flame AAS can provide rapid routine measurements
Requires relatively modest instrument complexity compared with some multi-element techniques
Suitable for quantitative analysis with calibration
Limitations
Many conventional AAS methods measure elements sequentially
Different elements may require different lamps and operating conditions
Sample digestion may be necessary
Chemical and ionization interferences can affect atomization
Detection limits and working ranges depend on the atomization method and element
Common Mistakes
Confusing atomic absorption with molecular absorption
Assuming all elements can be measured under identical conditions
Ignoring matrix and background interference
Using unsuitable calibration standards
Failing to account for sample dilution or digestion
Prerequisites
Atomic structure
Electronic transitions
Absorption spectroscopy
Calibration and quantitative analysis
Learning Objectives
Explain the principle of AAS
Describe the role of the hollow cathode lamp
Explain the need for atomization
Identify the main instrument components
Describe common applications and sources of interference
Practice Questions
What is atomic absorption spectroscopy?
Why must the analyte be converted into free atoms?
What is the function of a hollow cathode lamp?
How does AAS differ from UV–Visible molecular absorption?
Give four applications of AAS.
Key Takeaway
AAS measures element-specific radiation absorbed by free atoms and uses calibrated absorbance to quantify elemental concentrations.
References
| Title | Type | Url |
|---|---|---|
Skoog, Holler and Crouch, Principles of Instrumental Analysis | textbook | |
Harris, Quantitative Chemical Analysis | textbook | |
IUPAC Gold Book | terminology reference | https://goldbook.iupac.org/ |
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Analytical Chemistry