ICP-MS uses a high-temperature argon plasma to convert sample components into ions. A prepared sample is generally introduced as an aerosol. The ions are extracted from the plasma through an interface and transferred into a mass analyser, which separates them according to their mass-to-charge ratios. A detector measures the ion signals. ICP-MS offers very low detection limits for many elements, rapid multi-element analysis, and the ability to measure selected isotope ratios. However, polyatomic ions, isobaric overlaps, matrix effects, and contamination can affect results.
Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ICP-MS combines an inductively coupled plasma ion source with a mass spectrometer to identify and quantify elements and isotopes at very low concentrations.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
m/z | Mass-to-charge ratio | Thomson (Th) or instrument mass scale |
m | Ion mass | Da |
z | Ion charge number | Dimensionless |
S | Measured ion signal | Counts per second or instrument-dependent |
C | Element concentration | µg L⁻¹ or ng L⁻¹ |
R | Measured isotope signal ratio | Dimensionless |
I₁, I₂ | Signals for two selected isotopes | Same signal unit |
Example or application
A worked example has not yet been added.
Definition
ICP-MS is an elemental analytical technique that uses an inductively coupled plasma to generate ions and a mass spectrometer to separate and detect them according to mass-to-charge ratio.
Purpose
To determine trace and ultra-trace elemental concentrations and, where appropriate, isotope abundances in prepared samples.
Importance
It is widely used when very low detection limits, multi-element capability, or isotope information is required.
Key Concepts
Inductively coupled plasma
Ionization
Sample introduction
Interface cones
Mass-to-charge ratio
Mass analyser
Ion detector
Isobaric interference
Polyatomic interference
Collision and reaction cells
Internal standards
Isotope ratios
Principle
The plasma converts sample elements into ions. These ions enter a mass analyser, where they are separated according to their mass-to-charge ratios and detected. Ion signals are related to elemental concentrations through calibration.
Working Process
Prepare the sample using suitable digestion, dilution, or extraction.
Introduce the sample as an aerosol into the argon plasma.
Desolvate and vaporize the sample components.
Atomize and ionize the elements in the plasma.
Extract ions through the interface into the mass spectrometer.
Separate ions according to mass-to-charge ratio.
Detect the separated ions and record their signals.
Use calibration standards, internal standards, and quality controls to calculate concentrations.
Apply suitable interference-control procedures when required.
Equations
| Name | Formula | Description |
|---|---|---|
Mass-to-charge ratio | m/z | The mass analyser separates ions according to their mass divided by their charge number. |
Ion signal calibration | S = mC + b | An empirical relationship between measured ion signal and analyte concentration. |
Isotope ratio | R = I₁/I₂ | A simplified measured signal ratio for two isotopes, subject to instrument mass-bias and interference corrections. |
Units
Concentration: µg L⁻¹ or ng L⁻¹
Mass-to-charge ratio: Th
Ion signal: counts per second
Gas flow rate: L min⁻¹
Isotope ratio: dimensionless
Examples
ICP-MS can measure trace lead and cadmium in environmental water samples.
Selected isotope ratios can be measured for geological and environmental investigations.
Trace elemental impurities in pharmaceutical materials can be determined using validated ICP-MS procedures.
Applications
Ultra-trace elemental analysis
Environmental monitoring of metals
Pharmaceutical elemental impurity testing
Clinical and biological trace-element analysis
Geochemical and isotope studies
Food safety and contamination testing
Advantages
Very low detection limits for many elements
Rapid multi-element analysis
Can measure selected isotope ratios
Broad elemental coverage
Small sample quantities may be sufficient
Limitations
High instrument and maintenance costs
Polyatomic and isobaric interferences can affect accuracy
Contamination can be significant at ultra-trace levels
High matrix concentrations may suppress or enhance signals
Careful calibration, correction, and sample preparation are essential
Common Mistakes
Confusing mass-to-charge ratio with mass alone
Assuming all ions are singly charged
Ignoring polyatomic interference
Using contaminated acids, vessels, or laboratory materials
Reporting isotope ratios without considering mass bias and interference corrections
Prerequisites
Atomic emission and ionization
Plasma chemistry
Basic mass spectrometry
Isotopes and atomic masses
Trace analytical chemistry
Learning Objectives
Explain the principle of ICP-MS
Describe how the plasma generates ions
Explain mass-to-charge separation
Identify the major components of an ICP-MS instrument
Describe common interferences and correction approaches
Compare ICP-MS with ICP-OES
Practice Questions
What is ICP-MS?
What is the function of the inductively coupled plasma?
What does mass-to-charge ratio mean?
How does ICP-MS differ from ICP-OES?
Name three types of interference that can affect ICP-MS measurements.
Key Takeaway
ICP-MS converts sample elements into ions and separates them by mass-to-charge ratio, enabling highly sensitive multi-element and isotope analysis.
References
| Title | Type | Url |
|---|---|---|
Skoog, Holler and Crouch, Principles of Instrumental Analysis | textbook | |
Harris, Quantitative Chemical Analysis | textbook | |
IUPAC Gold Book | terminology reference | https://goldbook.iupac.org/ |
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Analytical Chemistry