✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CHE-005-132

Quality Assurance and Quality Control (QA/QC)

Quality assurance and quality control are complementary systems that help laboratories produce reliable, consistent, and technically valid analytical results. QA focuses on the overall quality system, while QC focuses on operational checks of analytical performance.

Explanation

Quality assurance (QA) consists of planned and systematic activities implemented within a quality system to provide confidence that analytical requirements will be fulfilled. It includes documented procedures, staff competence, method validation, equipment management, training, audits, corrective actions, and continuous improvement. Quality control (QC) consists of operational techniques and activities used to monitor whether analytical processes are performing acceptably. Examples include blanks, replicate measurements, calibration checks, control samples, spike recovery, and certified reference materials. A laboratory quality system combines preventive controls with ongoing monitoring. QC results are evaluated against predefined acceptance criteria, and failures should trigger investigation rather than being ignored or concealed.

Variables

SymbolNameDescription

C_spiked

Spiked sample concentration

The measured concentration after adding a known amount of analyte.

C_unspiked

Unspiked sample concentration

The measured concentration in the original sample before the spike addition.

C_added

Added analyte concentration

The concentration contribution from the known spike, expressed on a consistent basis.

s

Standard deviation

A measure of variability among replicate measurements.

x̄

Mean result

The average of the analytical measurements.

x_reference

Reference value

An accepted value used to evaluate analytical bias.

a

Calibration intercept

The predicted response when the analyte concentration is zero.

b

Calibration slope

The change in analytical response per unit change in analyte concentration.

Example or application

A worked example has not yet been added.

Definition

Quality assurance is the planned and systematic framework used to provide confidence in the quality of analytical work, while quality control is the set of operational checks used to monitor and maintain the quality of individual analytical processes.

Purpose

To ensure that analytical procedures are properly designed, consistently performed, monitored, documented, and capable of producing results that meet specified quality requirements.

Importance

Analytical results may influence research, environmental monitoring, product safety, clinical decisions, and regulatory compliance. A functioning QA/QC system helps laboratories detect problems, maintain consistency, demonstrate competence, and protect the integrity of reported data.

Key Concepts

  • Quality management system

  • Quality assurance

  • Quality control

  • Standard operating procedures

  • Method validation

  • Calibration and verification

  • Laboratory blanks

  • Replicate analysis

  • Certified reference materials

  • Spike recovery

  • Control charts

  • Corrective and preventive action

  • Document control

  • Traceability

Principle

Quality is maintained through documented procedures, competent personnel, suitable equipment, verified methods, and continuous monitoring. QA establishes the system that supports reliable work, while QC provides evidence that the analytical process is operating within defined acceptance criteria.

Working Process

  • Establish quality objectives and define analytical requirements.

  • Prepare and approve standard operating procedures for laboratory activities.

  • Train personnel and document their competence.

  • Maintain, calibrate, and verify analytical instruments.

  • Validate or verify analytical methods before routine use.

  • Use appropriate blanks, standards, replicates, and reference materials during analysis.

  • Evaluate QC results against predefined acceptance criteria.

  • Investigate deviations and identify root causes when QC results are unacceptable.

  • Implement corrective actions and assess their effectiveness.

  • Maintain records, conduct internal audits, and review the quality system.

Equations

  • Spike recovery (%) = [(C_spiked − C_unspiked) / C_added] × 100

  • Relative standard deviation (%) = (s / |x̄|) × 100

  • Measurement bias = x̄ − x_reference

  • Relative bias (%) = [(x̄ − x_reference) / x_reference] × 100

  • Calibration response: y = a + bx

Units

  • Spike recovery: percentage (%)

  • Relative standard deviation: percentage (%)

  • Bias: same unit as the analytical measurement

  • Relative bias: percentage (%)

  • Concentration: appropriate concentration unit

  • Calibration response: instrument-dependent unit

Examples

  • A laboratory analyzes a reagent blank to check whether reagents or laboratory equipment contribute contamination.

  • A certified reference material is analyzed to assess whether the method produces a result consistent with an established reference value.

  • A control sample is measured periodically and plotted on a control chart to detect changes in analytical performance.

  • A known analyte spike is added to a sample to evaluate recovery and possible matrix-related effects.

Applications

  • Routine chemical analysis

  • Environmental and water-quality testing

  • Pharmaceutical quality testing

  • Food and agricultural analysis

  • Clinical and biomedical laboratories

  • Industrial process monitoring

  • Research and academic laboratories

Advantages

  • Improves the consistency and reliability of analytical measurements.

  • Helps identify contamination, calibration problems, and instrument drift.

  • Provides documented evidence of laboratory performance.

  • Supports regulatory and accreditation requirements.

  • Encourages systematic investigation and continuous improvement.

Limitations

  • Maintaining a quality system requires time, trained personnel, and resources.

  • QC checks may not detect every source of systematic error.

  • Poorly selected acceptance limits can produce misleading decisions.

  • Reference materials may not perfectly represent every sample matrix.

  • Documentation alone does not guarantee technically valid results.

Common Mistakes

  • Treating QA and QC as identical activities.

  • Using QC samples without predefined acceptance criteria.

  • Ignoring failed control results and continuing analysis without investigation.

  • Assuming calibration automatically proves method accuracy.

  • Failing to document corrective actions.

  • Using reference materials that are unsuitable for the sample matrix or concentration range.

Prerequisites

  • Basic analytical chemistry

  • Analytical measurement principles

  • Calibration

  • Precision and accuracy

  • Basic laboratory safety and documentation

Learning Objectives

  • Differentiate quality assurance and quality control.

  • Explain the role of a laboratory quality management system.

  • Describe the use of blanks, replicates, and reference materials.

  • Explain how spike recovery evaluates analytical performance.

  • Describe the purpose of control charts.

  • Explain why corrective actions and documentation are essential.

Practice Questions

  • What is the difference between QA and QC?

  • Why are laboratory blanks used?

  • What information can a certified reference material provide?

  • How is spike recovery calculated?

  • What is the purpose of a control chart?

  • What should a laboratory do when a QC result fails its acceptance criterion?

  • Why is method validation an important part of quality assurance?

Key Takeaway

QA establishes the overall system for producing reliable analytical results, while QC checks whether the analytical process is performing as required.

References

TitleTypeUrl

ISO/IEC 17025:2017, General Requirements for the Competence of Testing and Calibration Laboratories

international standard

Eurachem, The Fitness for Purpose of Analytical Methods

technical guide

Harris, Quantitative Chemical Analysis

textbook

NIST/SEMATECH e-Handbook of Statistical Methods

technical reference

https://www.itl.nist.gov/div898/handbook/

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Analytical Chemistry