✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-CHE-015-007

Wavelength, Frequency and Wavenumber

Explains the three important quantities used to describe electromagnetic radiation and their mathematical relationships.

c = λν; ṽ = 1/λ

Explanation

Wavelength, frequency, and wavenumber are fundamental quantities used to describe electromagnetic radiation in spectroscopy. Wavelength is the distance between two successive points in the same phase of a wave, such as two neighboring crests. Frequency is the number of complete wave cycles passing a fixed point per second. Wavenumber is the reciprocal of wavelength and is commonly expressed in reciprocal centimetres in infrared spectroscopy. In vacuum, wavelength and frequency are related through the speed of light. As wavelength decreases, frequency increases. Wavenumber also increases when wavelength decreases. Photon energy is proportional to frequency and therefore also proportional to wavenumber when expressed consistently. Spectroscopic instruments may display spectra using wavelength, frequency, or wavenumber depending on the technique. Infrared spectra commonly use wavenumber because it is directly proportional to photon energy and provides convenient numerical values for molecular vibrational analysis.

Variables

SymbolMeaningUnit

c

Speed of light in vacuum

m s⁻¹

λ

Wavelength

m or cm

ν

Frequency

Hz or s⁻¹

ṽ

Wavenumber

m⁻¹ or cm⁻¹

Example or application

NameDescription

Infrared Wavenumber

An infrared absorption band at 1700 cm⁻¹ corresponds to a wavelength of approximately 5.88 μm.

Visible-Light Frequency

Light with a wavelength of 600 nm has a frequency of approximately 5.00 × 10¹⁴ Hz in vacuum.

Definition

Wavelength is the spatial period of a wave, frequency is the number of cycles per second, and wavenumber is the number of wave cycles per unit distance, commonly represented spectroscopically by the reciprocal of wavelength.

Purpose

To develop the ability to describe electromagnetic waves, convert between common spectral units, and interpret the axes of spectroscopic plots.

Importance

These quantities are used throughout spectroscopy to identify radiation, calculate photon energies, compare spectral positions, and interpret molecular transitions.

Learning Objectives

  • Define wavelength, frequency, and wavenumber.

  • Explain the mathematical relationship between the three quantities.

  • Convert nanometres, micrometres, metres, and reciprocal centimetres.

  • Interpret wavelength and wavenumber axes.

  • Explain why infrared spectroscopy commonly uses wavenumber.

Quantity Comparison

QuantitySymbolMeaningCommon Units

Wavelength

λ

Distance between equivalent points on successive wave cycles.

m, μm, nm

Frequency

ν

Number of complete cycles passing a point per second.

Hz

Wavenumber

ṽ

Reciprocal of wavelength.

m⁻¹, cm⁻¹

Unit Conversions

  • 1 m = 10⁹ nm.

  • 1 μm = 10⁻⁶ m.

  • 1 cm⁻¹ = 100 m⁻¹.

  • To calculate wavenumber in cm⁻¹, wavelength must be expressed in centimetres.

  • Frequency in hertz is equivalent to inverse seconds.

Physical Relationships

  • At constant wave speed, increasing wavelength decreases frequency.

  • Wavenumber increases as wavelength decreases.

  • Photon energy increases with frequency and wavenumber.

  • The speed of light in vacuum relates wavelength and frequency.

Applications

  • Reading infrared spectra

  • Calculating photon energy

  • Comparing spectral positions

  • Converting spectral data between units

  • Interpreting UV-visible and microwave measurements

Limitations

  • Unit conversion errors can produce large mistakes in spectral calculations.

  • Wavenumber must be calculated using a wavelength expressed in the corresponding length unit.

  • The reciprocal relationship applies to the defined vacuum wavelength; material media require attention to refractive index.

Common Misconceptions

  • Wavenumber is not the same quantity as frequency, even though both increase with photon energy.

  • A larger wavelength corresponds to a smaller frequency in vacuum.

  • The common infrared unit cm⁻¹ represents reciprocal centimetres, not centimetres.

  • Frequency is not measured in metres.

Worked Example

Problem

An infrared absorption band occurs at 2000 cm⁻¹. Calculate its wavelength in micrometres.

Solution

  • Use λ = 1/ṽ.

  • λ = 1/2000 cm = 5.0 × 10⁻⁴ cm.

  • Convert centimetres to metres: 5.0 × 10⁻⁶ m.

  • Convert metres to micrometres: 5.0 μm.

Answer

The wavelength is 5.0 μm.

Practice Questions

  • What is the difference between wavelength and frequency?

  • What does a wavenumber represent?

  • Why does wavenumber increase when wavelength decreases?

  • Convert 1000 cm⁻¹ into metres⁻¹.

  • Calculate the frequency of light with a wavelength of 400 nm.

Key Takeaway

Wavelength, frequency, and wavenumber describe the same radiation from different perspectives and are essential for understanding and interpreting spectroscopic data.

Reference

  • Fundamentals of Molecular Spectroscopy, C. N. Banwell and E. M. McCash.

  • Atkins' Physical Chemistry, Oxford University Press.

Related Topics

  • Electromagnetic Spectrum

  • Photon Energy and Quantization

  • Relationship Between Photon Energy and Frequency

  • Energy Levels and Spectral Lines

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Spectroscopy