✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-CS-007-007

Robot Components and Architecture

Robot components and architecture describe the physical and computational elements that form a robotic system and the way those elements are organized to perform coordinated tasks. Major components include the mechanical structure, actuators, sensors, power supply, electronic circuits, embedded controllers, computational units, communication interfaces, end-effectors and software. Robotic architecture defines how information, commands and feedback flow between these components and how sensing, planning, control and action are organized. A well-designed architecture must provide compatibility, timing, reliability, maintainability, safety and sufficient performance for the intended application.

Explanation

A robot is constructed from multiple subsystems that must work together as a coordinated whole. Its architecture describes both the arrangement of physical components and the organization of computational and control functions. The exact architecture depends on whether the robot is a fixed industrial manipulator, a mobile platform, an aerial vehicle, a medical system or another specialized design.

The mechanical structure provides the physical framework of the robot. It includes the base, links, joints, frames, supports, transmission elements, wheels, legs or other movement mechanisms. The structure determines the geometry, strength, stiffness, range of motion and physical limits of the system. Material selection and mechanical design influence weight, durability, vibration, thermal behavior and payload capacity.

Actuators produce movement or controlled physical action. Electric motors are widely used because they are controllable and can be integrated with electronic drives. Other actuator technologies include hydraulic and pneumatic systems, which may be suitable where particular force, speed or compliance characteristics are required. Actuator selection depends on torque, force, speed, precision, energy efficiency, size, thermal limitations and operating environment.

Sensors measure physical quantities and provide information about the robot or its surroundings. Internal sensors may measure joint position, velocity, acceleration, motor current and temperature. External sensors may detect distance, objects, images, force, contact, sound or environmental conditions. Sensor measurements allow the robot to estimate its state and respond to changing conditions.

The power system supplies the energy required by controllers, sensors, actuators and communication devices. Depending on the robot, power may come from batteries, electrical infrastructure, fuel cells, hydraulic supplies or other sources. Power management must consider voltage regulation, current capacity, energy storage, charging, thermal effects and operating duration.

Electronic hardware connects sensors, actuators and computational units. It includes signal-conditioning circuits, motor drivers, communication interfaces, microcontrollers, processors and protective circuitry. Sensor signals may require filtering, amplification or conversion before software can use them. Actuator commands may require power electronics to provide the electrical energy needed for movement.

The controller coordinates the robot's behavior. A microcontroller may manage low-level timing and motor commands, while a more powerful computer may perform perception, planning and high-level task management. Some robots use multiple controllers arranged hierarchically or distributed across subsystems.

The software architecture organizes robotic functions. Typical software modules include sensor acquisition, signal processing, state estimation, localization, mapping, perception, planning, control, diagnostics and communication. Modular software allows functions to be developed and tested separately, but interfaces and timing must be designed carefully to ensure correct integration.

End-effectors are devices attached to the working end of a manipulator. They interact directly with objects or the environment and may include grippers, suction devices, welding tools, cutting tools, inspection instruments or specialized probes. The choice of end-effector depends on object geometry, material, mass, required contact force and task precision.

Communication interfaces allow components within a robot and external systems to exchange information. These may include wired buses, serial interfaces, industrial networks and wireless connections. Communication architecture must address data format, bandwidth, latency, synchronization, error handling and cybersecurity.

A common conceptual architecture separates robotic operation into sensing, estimation, planning, control and actuation layers. The sensing layer obtains data, the estimation layer constructs a useful representation of the robot's state and environment, the planning layer selects actions, the control layer calculates commands and the actuation layer performs the physical action. Feedback connects the resulting behavior to subsequent sensing and control decisions.

Robotic architectures may be centralized, hierarchical, distributed or hybrid. A centralized design coordinates functions through a main controller. A hierarchical architecture separates high-level task planning from lower-level motion and actuator control. Distributed architectures assign processing to multiple units, while hybrid architectures combine these approaches. Architecture selection depends on complexity, performance, safety, communication and maintenance requirements.

A complete robotic system must be designed as an integrated whole. Mechanical loads influence actuator selection, actuator characteristics influence control design, sensor placement influences perception quality, and computational delays influence closed-loop behavior. Effective system architecture therefore requires early consideration of interfaces, timing, energy, safety and failure conditions.

Example or application

A worked example has not yet been added.

Definition

Robot components and architecture refer to the physical, electronic, computational and software elements of a robotic system and the structural and functional organization through which those elements exchange information, coordinate control and perform robotic tasks.

Purpose

  • To identify the major hardware and software components that form a robot.

  • To explain the function and interaction of mechanical structures, actuators, sensors, controllers and power systems.

  • To understand how robotic architecture organizes sensing, processing, planning, control and action.

  • To establish the importance of component compatibility, communication, timing and system integration.

  • To provide a foundation for designing, analyzing, maintaining and troubleshooting complete robotic systems.

Importance

Understanding robot components and architecture is essential because robotic performance depends on the coordinated operation of many interconnected subsystems. It enables engineers to identify component requirements, design compatible interfaces, organize software and control functions, manage power and communication, and evaluate system reliability. A clear architecture also improves modularity, maintainability, scalability and fault diagnosis. Without suitable system-level organization, even high-quality individual components may fail to produce reliable overall behavior.

Major Hardware Components

ComponentDescriptionExamplesMain Functions

Mechanical Structure

The physical framework supporting the robot's components and enabling its intended movement or interaction.

  • Base and chassis

  • Links and joints

  • Frames and supports

  • Wheels and tracks

  • Leg structures

  • Mechanical transmissions

  • Provide structural support.

  • Transmit forces and motion.

  • Define movement geometry.

  • Support sensors, actuators and payloads.

Actuators

Devices that convert supplied energy into controlled movement or physical action.

  • DC motors

  • Servo motors

  • Stepper motors

  • Hydraulic actuators

  • Pneumatic actuators

  • Generate movement.

  • Produce force or torque.

  • Control joints and locomotion mechanisms.

  • Operate end-effectors.

Sensors

Devices that measure internal states or environmental conditions.

  • Encoders

  • Inertial measurement units

  • Cameras

  • LiDAR

  • Ultrasonic sensors

  • Force and torque sensors

  • Temperature sensors

  • Measure robot state.

  • Detect environmental features.

  • Support localization and perception.

  • Provide feedback for control.

Power Supply and Management

The subsystem that stores, supplies, distributes and regulates energy.

  • Rechargeable batteries

  • Power converters

  • Voltage regulators

  • Battery management systems

  • External power supplies

  • Provide operating energy.

  • Maintain appropriate voltage and current.

  • Monitor energy condition.

  • Protect electrical components.

Electronic Hardware

Electronic circuits and interfaces that connect sensors, actuators and computational devices.

  • Motor drivers

  • Signal-conditioning circuits

  • Analog-to-digital converters

  • Microcontroller boards

  • Communication modules

  • Acquire and condition sensor signals.

  • Drive actuators.

  • Convert and transmit data.

  • Provide electrical protection.

Controller and Computational Unit

Hardware that executes control algorithms, software and decision-making procedures.

  • Microcontrollers

  • Embedded computers

  • Industrial controllers

  • Single-board computers

  • High-performance onboard computers

  • Execute software.

  • Process sensor information.

  • Generate control commands.

  • Coordinate robotic subsystems.

End-Effector

A device attached to the working end of a manipulator for interacting with objects or the environment.

  • Mechanical grippers

  • Vacuum suction devices

  • Welding tools

  • Cutting tools

  • Inspection probes

  • Grasp or release objects.

  • Apply tools to workpieces.

  • Perform specialized tasks.

  • Interact with the environment.

Communication Interface

Hardware and protocols that enable information exchange among robotic components and external systems.

  • Serial communication

  • Ethernet

  • CAN bus

  • Industrial communication networks

  • Wireless communication modules

  • Exchange commands and measurements.

  • Coordinate distributed controllers.

  • Connect robots to supervisory systems.

  • Support remote monitoring and diagnostics.

Major Software Components

ComponentDescription

Device Drivers and Hardware Abstraction

Software interfaces that allow applications and controllers to communicate with sensors, actuators and other hardware.

Sensor Acquisition and Processing

Modules that collect measurements, apply filtering and convert raw signals into useful data.

State Estimation

Algorithms that estimate position, orientation, velocity and other internal or environmental states from measurements.

Perception

Software that interprets sensor information to detect objects, surfaces, obstacles and environmental features.

Planning

Algorithms that determine task sequences, movement paths or actions according to objectives and constraints.

Control

Algorithms that calculate actuator commands to achieve desired movement, force or system behavior.

Task and Mission Management

Software that coordinates high-level tasks, monitors progress and handles task transitions.

Diagnostics and Safety Monitoring

Modules that detect faults, monitor operational limits and support safe system behavior.

Robotic Architecture Layers

LayerDescriptionResponsibility

Physical Layer

Contains the mechanical structure, actuators, sensors, power supply and physical interfaces.

Provides physical capability and environmental interaction.

Device and Interface Layer

Manages hardware communication, sensor acquisition, actuator drivers and device-level operations.

Connects physical devices to computational systems.

Estimation and Perception Layer

Processes measurements and estimates the robot's internal condition and surrounding environment.

Transforms raw measurements into useful information.

Planning and Decision Layer

Selects tasks, movement sequences and actions according to objectives and constraints.

Determines what the robot should do.

Control Layer

Converts desired behavior into actuator commands and manages feedback.

Determines how the robot should execute the selected action.

Application and Mission Layer

Coordinates complete tasks and communicates with users or external systems.

Manages the robot's overall operational objectives.

Architecture Types

ArchitectureDescriptionAdvantagesLimitations

Centralized Architecture

A main computational unit performs or coordinates most important processing and control functions.

Provides centralized information management and can simplify global coordination.

May create a processing bottleneck and a single point of failure.

Hierarchical Architecture

Organizes robotic functions into multiple levels, typically separating task planning, motion planning and low-level control.

Separates responsibilities and supports structured task execution.

Coordination between layers may introduce delays or interface complexity.

Distributed Architecture

Assigns computation and control functions to multiple processors or networked components.

Supports modularity, scalability and parallel processing.

Requires communication management, synchronization and distributed fault handling.

Hybrid Architecture

Combines centralized planning, hierarchical organization and distributed local control.

Can balance global coordination with local responsiveness.

Requires careful management of interfaces, responsibilities and timing.

Component Interaction Example

Scenario

A mobile robot detects an obstacle and changes its direction.

Sequence

StepComponentOperation

1

Distance Sensor

Measures the distance between the robot and an obstacle.

2

Embedded Controller

Receives the sensor measurement and makes it available to the processing software.

3

Perception and State Estimation

Interprets the measurement and estimates the obstacle's position relative to the robot.

4

Planning Module

Determines an alternative movement direction that satisfies the navigation constraints.

5

Control Module

Calculates appropriate wheel-speed commands.

6

Motor Drivers and Actuators

Supply the required electrical power and produce the commanded wheel movement.

7

Feedback Sensors

Measure the resulting movement so that the controller can evaluate and correct the robot's behavior.

Design Considerations

  • Mechanical and electrical compatibility.

  • Actuator sizing and power requirements.

  • Sensor placement, calibration and measurement quality.

  • Controller processing capacity and timing.

  • Communication bandwidth and latency.

  • Software modularity and interface consistency.

  • Thermal management and energy efficiency.

  • Safety monitoring and fault detection.

  • Maintainability, scalability and component replacement.

Limitations And Challenges

  • Subsystems may have incompatible voltage, timing, communication or mechanical requirements.

  • Sensor noise and calibration errors can affect higher-level decision-making.

  • Communication delays may reduce control performance.

  • Power limitations may restrict movement, computation and operating duration.

  • Software complexity increases as the number of integrated functions grows.

  • Mechanical wear and environmental damage can reduce reliability.

  • A failure in one subsystem may affect the entire robot.

  • Distributed systems require careful synchronization and fault management.

Applications

  • Designing industrial manipulators and production robots.

  • Building autonomous mobile robots.

  • Developing medical and rehabilitation systems.

  • Creating aerial, underwater and space robots.

  • Integrating sensors and actuators into intelligent machines.

  • Developing modular robotic software platforms.

  • Diagnosing and maintaining robotic equipment.

Reference

  • Siciliano, B. and Khatib, O. Springer Handbook of Robotics. Springer.

  • Craig, J. J. Introduction to Robotics: Mechanics and Control. Pearson.

  • Niku, S. B. Introduction to Robotics: Analysis, Control, Applications. Wiley.

  • Quigley, M. et al. ROS: an open-source Robot Operating System. ICRA Workshop on Open Source Software.

Related Topic

  • Introduction to Robotics

  • Robotics as an Interdisciplinary Science

  • Degrees of Freedom in Robotics

  • Robotic Sensors and Instrumentation

  • Robot Actuators and Drive Systems

  • Robot Operating Systems and Software Frameworks

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Robotics