✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-EAR-004-009

Classification of Rocks: An Overview

Rock classification is the systematic organization of rocks according to their origin, mineral composition, chemical composition, texture, grain size, structure and other diagnostic characteristics. The fundamental genetic classification divides rocks into igneous, sedimentary and metamorphic groups, each of which contains more specialized classification systems.

Explanation

Rock classification is an essential part of petrology because it provides a consistent way to describe, compare and interpret geological materials. A reliable classification system uses observable and measurable characteristics rather than relying only on colour, general appearance or geographical location.

The broadest and most widely used classification is based on origin. Igneous rocks form through the cooling and solidification of magma or lava. Sedimentary rocks form through sediment accumulation, chemical precipitation or biological processes followed by varying degrees of lithification and diagenesis. Metamorphic rocks form through mineralogical, textural and chemical transformations of pre-existing rocks under changed pressure, temperature, deformation and fluid conditions without complete melting.

Each major group requires specialized classification criteria. Igneous rocks are commonly classified using mineral proportions, silica content, chemical composition, grain size and texture. The International Union of Geological Sciences (IUGS) system includes modal mineralogical classification for suitable plutonic rocks and chemical classification methods for rocks that are too fine-grained or glassy for reliable modal analysis. The QAPF diagram uses the proportions of quartz, alkali feldspar, plagioclase and feldspathoids for appropriate rock types.

Sedimentary rocks are commonly classified into clastic, chemical and biochemical groups. Clastic rocks are described using grain size, sorting, roundness, composition and matrix or cement characteristics. Chemical and biochemical rocks are classified using mineral composition, depositional processes and biological contributions. Carbonate classification may use frameworks such as the Dunham and Folk systems, each emphasizing different characteristics.

Metamorphic rocks are classified using mineral assemblages, protolith, texture, foliation, metamorphic grade and metamorphic facies. Names such as slate, schist, gneiss, marble and quartzite describe characteristic rock types, while mineral-based names may provide additional information about composition and metamorphic conditions.

Classification is not simply a naming exercise. It allows geologists to compare rock bodies, reconstruct geological histories, communicate scientific observations and investigate the relationship between rock characteristics and formation processes. When a specimen has undergone extensive alteration or contains ambiguous features, classification may remain provisional until additional mineralogical, chemical or field evidence becomes available.

Example or application

A worked example has not yet been added.

Definition

Rock classification is the systematic grouping and naming of rocks according to their geological origin, mineralogical and chemical composition, texture, grain size, structure and other diagnostic properties.

Purpose

  • To organize the diversity of geological materials into recognizable and scientifically meaningful groups.

  • To establish consistent terminology for identifying and describing rocks.

  • To connect rock characteristics with their formation processes and geological environments.

  • To support comparison of rock samples from different locations and geological settings.

  • To provide a foundation for geological mapping, petrological research and applied geological investigations.

Importance

  • Classification makes scientific communication more precise and consistent.

  • It helps distinguish rocks formed through fundamentally different geological processes.

  • It allows geologists to infer possible formation conditions from mineralogical and textural evidence.

  • It supports the interpretation of geological maps, rock sequences and tectonic environments.

  • It provides a basis for selecting appropriate analytical methods and further investigation.

  • It is important in construction, mining, resource exploration and engineering geology because different rock types have different properties.

Primary genetic classification

GroupFormationMajor subgroups

Igneous rocks

Cooling and solidification of magma or lava.

SubgroupDescriptionExamples

Intrusive or plutonic

Form when magma crystallizes beneath Earth's surface, commonly allowing relatively slow cooling and coarse-grained textures.

  • Granite

  • Diorite

  • Gabbro

Extrusive or volcanic

Form when lava cools at or near Earth's surface, commonly producing fine-grained, glassy or vesicular textures.

  • Basalt

  • Andesite

  • Rhyolite

  • Obsidian

Hypabyssal or subvolcanic

Form when magma crystallizes at relatively shallow crustal levels, commonly within dikes, sills and small intrusions.

  • Dolerite

  • Porphyritic intrusive rocks

Sedimentary rocks

Accumulation and lithification of sediments or chemical and biological precipitation.

SubgroupDescriptionExamples

Clastic or siliciclastic

Composed mainly of transported fragments of pre-existing rocks and minerals.

  • Conglomerate

  • Breccia

  • Sandstone

  • Siltstone

  • Mudstone

Chemical

Form through precipitation of dissolved substances from water or other fluids.

  • Rock salt

  • Some gypsum deposits

  • Chemical chert

Biochemical and organic

Form through biological accumulation, organic matter preservation or organism-mediated mineral precipitation.

  • Fossiliferous limestone

  • Chalk

  • Coal

Metamorphic rocks

Transformation of pre-existing rocks through changes in temperature, pressure, deformation and fluid conditions without complete melting.

SubgroupDescriptionExamples

Foliated

Contain a planar or banded fabric commonly associated with directed stress and mineral alignment.

  • Slate

  • Phyllite

  • Schist

  • Gneiss

Non-foliated

Lack a prominent planar mineral alignment, commonly because of mineral composition, recrystallization or metamorphic conditions.

  • Marble

  • Quartzite

  • Hornfels

Classification criteria

CriterionDescriptionExamplesSignificance

Origin or genesis

The geological process responsible for forming the rock.

  • Igneous

  • Sedimentary

  • Metamorphic

Provides the broadest framework for organizing rocks.

Mineralogical composition

The identity and relative proportions of minerals present.

  • Quartz-rich

  • Feldspar-rich

  • Calcite-dominated

  • Olivine-bearing

Helps identify rock types and infer formation conditions.

Chemical composition

The relative abundance of major, minor and trace chemical elements.

  • Silica-rich

  • Intermediate

  • Mafic

  • Ultramafic

Important for chemical classification, especially when minerals are too fine-grained to identify reliably.

Texture

The size, shape, arrangement and relationships of mineral grains or rock fragments.

  • Coarse-grained

  • Fine-grained

  • Porphyritic

  • Clastic

  • Foliated

Provides evidence about crystallization, sedimentation, deformation and recrystallization.

Grain size

The dimensions of mineral crystals or sedimentary particles.

  • Gravel-sized

  • Sand-sized

  • Silt-sized

  • Clay-sized

Especially important in clastic sedimentary rock classification.

Structure

The larger-scale organization of rock features.

  • Bedded

  • Massive

  • Vesicular

  • Banded

  • Foliated

Helps reconstruct formation processes and geological history.

Metamorphic grade

A broad description of the intensity of metamorphic conditions, commonly related to temperature and pressure.

  • Low grade

  • Medium grade

  • High grade

Helps interpret metamorphic evolution when combined with mineral assemblages and rock composition.

Igneous classification methods

MethodDescriptionImportant systemComponentsApplicationImportant approachGroupsExamples

Mineralogical or modal classification

Uses the measured volume proportions of minerals in a rock.

QAPF classification for suitable plutonic and volcanic rocks.

SymbolMeaning

Q

Quartz.

A

Alkali feldspar.

P

Plagioclase feldspar.

F

Feldspathoids.

The relevant mineral proportions are recalculated to 100% after excluding components not included in the diagram. The diagram is used only for rock groups for which the classification is applicable.

Chemical classification

Uses whole-rock chemical composition, particularly when grain size is too fine or glassy material prevents reliable modal mineral measurement.

  • SiO₂ weight percentage

  • Na₂O weight percentage

  • K₂O weight percentage

Helps classify fine-grained volcanic rocks and compare their chemical compositions.

Total alkali-silica (TAS) classification for appropriate volcanic rocks.

Silica and mineralogical character

Uses broad compositional groups and the abundance of silica and mafic minerals.

Provides a useful broad description of igneous rock composition.

  • Felsic

  • Intermediate

  • Mafic

  • Ultramafic

Textural classification

Uses crystal size, crystal relationships and glass content.

Helps interpret the cooling and crystallization history of igneous rocks.

  • Phaneritic

  • Aphanitic

  • Porphyritic

  • Glassy

  • Pegmatitic

Sedimentary classification methods

MethodDescriptionCommon grain size classesNoteExamplesApplicationImportant systems

Grain-size classification

Classifies clastic sedimentary rocks according to the sizes of their constituent particles.

ClassApproximate sizeTypical rocks

Gravel

Greater than 2 mm

  • Conglomerate

  • Breccia

Sand

0.0625 mm to 2 mm

  • Sandstone

Silt

0.0039 mm to 0.0625 mm

  • Siltstone

Clay

Smaller than approximately 0.0039 mm

  • Claystone

  • Shale

  • Mudstone

The boundaries follow commonly used sedimentological size divisions; exact naming conventions may vary among classification systems.

Composition-based classification

Uses the mineralogical and lithic composition of sediment grains.

  • Quartz arenite

  • Feldspathic sandstone

  • Lithic sandstone

Helps infer source-rock composition, sediment maturity and provenance.

Carbonate classification

Uses carbonate components, grain support, mud content and depositional characteristics.

Distinguishes carbonate rocks according to depositional texture and component composition.

  • Dunham classification

  • Folk classification

Origin-based classification

Distinguishes clastic, chemical and biochemical sedimentary rocks according to how their components accumulated.

Connects sedimentary rock characteristics with depositional and post-depositional processes.

Metamorphic classification methods

MethodDescriptionExamples

Texture-based classification

Distinguishes rocks according to foliation, mineral alignment, grain relationships and banding.

  • Slate

  • Phyllite

  • Schist

  • Gneiss

  • Marble

Mineral assemblage classification

Uses characteristic combinations of minerals to interpret metamorphic conditions.

  • Garnet-bearing schist

  • Chlorite schist

  • Kyanite-bearing gneiss

  • Amphibolite

Metamorphic facies classification

Groups mineral assemblages associated with characteristic pressure-temperature ranges for suitable bulk compositions.

  • Greenschist facies

  • Amphibolite facies

  • Granulite facies

  • Blueschist facies

  • Eclogite facies

Protolith-based classification

Uses the original rock type before metamorphism.

  • Metabasalt

  • Metapelite

  • Metagranite

  • Metacarbonate

Classification workflow

StepNameDescription

1

Observe geological context

Record the rock's location, field relationships, surrounding formations and structural setting.

2

Describe macroscopic properties

Examine colour, grain size, mineral appearance, texture, structures and visible relationships.

3

Determine the likely rock group

Use geological evidence to establish whether the sample is igneous, sedimentary or metamorphic.

4

Identify mineralogical composition

Use hand specimens, thin sections and analytical methods to determine the minerals present.

5

Determine chemical composition when necessary

Apply whole-rock chemical analysis where mineralogical classification is insufficient or unsuitable.

6

Apply the appropriate classification system

Select the recognized classification scheme for the relevant rock group and available evidence.

7

Assign a name and document uncertainty

Use a scientifically appropriate rock name and record any uncertainty caused by alteration, grain size or incomplete information.

Worked classification examples

SampleObservationsClassificationReasoning

Coarse-grained rock containing abundant quartz, feldspar and mica

  • Crystalline texture

  • Visible interlocking mineral grains

  • Quartz and feldspar are major components

  • No evidence of sedimentary bedding

Likely granite, subject to confirmation of mineral proportions and applicable classification criteria.

The coarse crystalline texture and mineral assemblage are consistent with a felsic intrusive igneous rock.

Layered rock composed mainly of sand-sized quartz grains

  • Clastic texture

  • Sand-sized particles

  • Quartz-rich composition

  • Possible sedimentary bedding

Quartz-rich sandstone.

The grain size and clastic composition indicate a sandstone; more detailed classification depends on framework grains, matrix and cement proportions.

Foliated rock containing aligned mica and visible garnet

  • Planar mineral alignment

  • Metamorphic mineral assemblage

  • Visible recrystallized grains

Garnet-bearing schist, if the mineral proportions and texture support that name.

The strong foliation and abundant aligned mica are consistent with a schistose metamorphic rock.

Classification limitations

  • Some rocks are altered, weathered or metamorphosed so extensively that their original classification becomes uncertain.

  • Fine-grained and glassy igneous rocks may require chemical classification because their individual mineral grains cannot be measured reliably.

  • Different classification systems may emphasize different properties and produce different descriptive names for the same specimen.

  • Mineral proportions and chemical compositions can vary within a single intrusive body or sedimentary formation.

  • Rock names should be assigned using the appropriate recognized system rather than visual resemblance alone.

  • A rock's classification describes its present or interpreted characteristics but does not necessarily reveal its complete geological history.

Reference

  • Le Maitre, R. W. et al. Igneous Rocks: A Classification and Glossary of Terms. Cambridge University Press.

  • Folk, R. L. Petrology of Sedimentary Rocks. Hemphill Publishing.

  • Dunham, R. J. Classification of Carbonate Rocks According to Depositional Texture. AAPG Memoir.

  • Winter, J. D. Principles of Igneous and Metamorphic Petrology. Pearson.

  • Best, M. G. Igneous and Metamorphic Petrology. Wiley-Blackwell.

Related Topic

  • Introduction to Petrology

  • Rocks as Geological Materials

  • Rock, Mineral and Mineraloid: Differences and Relationships

  • Igneous, Sedimentary and Metamorphic Rock Systems

  • Fundamental Principles of Rock Formation

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Petrology