✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-EAR-004-010

Igneous, Sedimentary and Metamorphic Rock Systems

Igneous, sedimentary and metamorphic rocks are the three fundamental genetic groups of Earth's rocks. They form through different but interconnected processes: magma crystallization, sediment accumulation and lithification, and solid-state transformation under changed geological conditions.

Explanation

Earth's rocks are commonly organized into three fundamental genetic systems: igneous, sedimentary and metamorphic. Each system represents a distinct set of processes, although rocks can move between these groups through the rock cycle. Understanding their differences is essential for identifying geological materials and reconstructing the history of Earth's crust.

Igneous rocks form through the cooling and solidification of molten material. Magma develops through partial melting of mantle or crustal sources and may change composition during ascent and storage. When it cools below the surface, it commonly forms intrusive rocks with relatively coarse crystals. When lava cools at or near the surface, it commonly forms extrusive rocks with fine-grained, glassy or vesicular textures. Mineral composition, chemical composition and crystallization history are important criteria for classifying igneous rocks.

Sedimentary rocks form through the accumulation and transformation of sediments or through chemical and biological precipitation. Their formation commonly begins with weathering and erosion of pre-existing rocks. The resulting particles may be transported by water, wind, ice or gravity and deposited in rivers, lakes, deserts, deltas and marine basins. Burial produces compaction, cementation and other diagenetic changes. Some sedimentary rocks form through the precipitation of minerals from water or the accumulation of biological materials such as shells and plant remains.

Metamorphic rocks form when pre-existing igneous, sedimentary or metamorphic rocks undergo mineralogical, chemical or textural changes under altered temperature, pressure, deformation and fluid conditions without complete melting. Metamorphic processes include recrystallization, mineral reactions, mineral alignment, chemical exchange and partial melting under suitable conditions. The resulting rocks may be foliated, banded or non-foliated depending on their composition and geological history.

The three systems are interconnected. Igneous rocks may be weathered into sediments; sedimentary rocks may become metamorphic during burial; metamorphic rocks may partially melt and generate magma; and any exposed rock group may be broken down and recycled into sediment. The relationships are controlled by plate tectonics, Earth's internal heat, surface energy, gravity, fluid movement and geological time.

The distinction among these systems is based on formation history rather than appearance alone. Similar-looking rocks can have different origins, while rocks within the same genetic group may exhibit very different mineral compositions and textures. Reliable classification therefore combines field context, mineralogy, chemistry, texture and structural evidence.

Example or application

A worked example has not yet been added.

Definition

Igneous, sedimentary and metamorphic rock systems are the three principal genetic categories of rocks, distinguished by their formation processes: crystallization of magma or lava, accumulation and lithification or precipitation of sedimentary material, and solid-state transformation of pre-existing rocks under changed geological conditions.

Purpose

  • To distinguish the three fundamental rock systems according to their formation processes.

  • To understand the geological environments in which different rock groups develop.

  • To connect mineral composition and texture with the physical and chemical conditions of rock formation.

  • To reconstruct geological histories using relationships among different rock types.

  • To understand how tectonic and surface processes control the distribution and transformation of rocks.

Importance

  • The three rock systems form the foundation of petrological classification.

  • Their study explains how Earth's crust is created, modified, exposed and recycled.

  • Igneous rocks provide evidence of magmatism, mantle melting and crustal development.

  • Sedimentary rocks preserve records of surface environments, climate, biological activity and basin evolution.

  • Metamorphic rocks reveal information about burial, tectonic deformation, heat transfer and deep crustal processes.

  • The relationships among the three systems help geologists reconstruct the long-term evolution of geological regions.

Igneous rock system

Definition

The igneous rock system consists of rocks formed when magma or lava cools and solidifies through crystallization or, in some cases, rapid quenching into glass.

Formation processes

ProcessDescription

Partial melting

A portion of mantle or crustal material melts and produces magma. The melt composition depends on source composition, pressure, temperature, water content and degree of melting.

Magma migration

Magma moves through fractures, porous regions or larger conduits and may accumulate in temporary storage regions.

Magma differentiation

Processes such as fractional crystallization, assimilation and magma mixing can modify the chemical composition of magma.

Crystallization

Minerals form as magma cools and conditions change. Crystal size and texture depend on cooling history, nucleation, growth and melt composition.

Volcanic eruption

Magma reaching the surface is erupted as lava or fragmented material, which cools to form extrusive igneous rocks and volcanic deposits.

Major subgroups

SubgroupDescriptionExamples

Intrusive or plutonic rocks

Form through magma crystallization below Earth's surface, commonly producing coarse-grained textures.

  • Granite

  • Diorite

  • Gabbro

  • Peridotite

Extrusive or volcanic rocks

Form through lava cooling at or near the surface, commonly producing fine-grained, glassy or vesicular textures.

  • Rhyolite

  • Andesite

  • Basalt

  • Obsidian

Hypabyssal or subvolcanic rocks

Form in shallow intrusions such as dikes and sills, commonly with textures intermediate between deep intrusive and volcanic rocks.

  • Dolerite

  • Porphyritic intrusive rocks

Compositional groups

GroupCharacteristicsExamples

Felsic

Generally rich in silica and feldspar, commonly with quartz and relatively low proportions of iron- and magnesium-rich minerals.

  • Granite

  • Rhyolite

Intermediate

Have intermediate chemical compositions and commonly contain plagioclase with amphibole or pyroxene.

  • Diorite

  • Andesite

Mafic

Generally richer in iron and magnesium and commonly contain pyroxene, calcium-rich plagioclase and sometimes olivine.

  • Gabbro

  • Basalt

Ultramafic

Dominated by magnesium- and iron-rich minerals, commonly with very low silica relative to felsic rocks.

  • Peridotite

  • Dunite

Diagnostic textures

TextureDescription

Phaneritic

Crystals are sufficiently large to be recognized with the unaided eye or a hand lens.

Aphanitic

Crystals are too small to identify individually with the unaided eye.

Porphyritic

Larger crystals called phenocrysts occur within a finer-grained groundmass, commonly recording more than one stage of cooling.

Glassy

A non-crystalline texture produced by rapid cooling.

Vesicular

Contains cavities left by gas bubbles in solidifying lava.

Pegmatitic

Contains exceptionally coarse crystals, commonly associated with late-stage volatile-rich magmatic systems.

Important controls

  • Source-rock composition and degree of partial melting.

  • Pressure and temperature during magma generation.

  • Water and other volatile components.

  • Magma ascent, storage and residence time.

  • Fractional crystallization, magma mixing and assimilation.

  • Cooling rate and conditions of crystallization.

Geological significance

  • Records mantle and crustal melting.

  • Forms oceanic crust and contributes to continental crust growth.

  • Provides evidence of volcanic and intrusive activity.

  • Hosts economically important mineral deposits.

  • Helps reconstruct tectonic environments and magmatic histories.

Sedimentary rock system

Definition

The sedimentary rock system consists of rocks formed through the accumulation and lithification of sediment, chemical precipitation from fluids or biological accumulation and preservation.

Formation processes

ProcessDescription

Weathering

Physical, chemical and biological processes break down source rocks and minerals.

Erosion

Weathered material is removed from its original location by water, wind, ice or gravity.

Transportation

Sediments and dissolved substances are moved through rivers, glaciers, wind systems, coastal currents and other transport processes.

Deposition

Sediments accumulate when transport conditions change or when biological and chemical processes produce material that is preserved.

Compaction

Burial pressure reduces pore spaces and rearranges or deforms sediment grains.

Cementation

Minerals precipitated from pore fluids bind sediment grains together.

Diagenesis

Post-depositional physical, chemical and biological changes modify sediments during burial and lithification.

Major subgroups

SubgroupDescriptionExamples

Clastic sedimentary rocks

Composed mainly of fragments of pre-existing rocks and minerals.

  • Conglomerate

  • Breccia

  • Sandstone

  • Siltstone

  • Mudstone

Chemical sedimentary rocks

Form through mineral precipitation from water or other fluids.

  • Rock salt

  • Gypsum rock

  • Some forms of chert

Biochemical and organic sedimentary rocks

Form through the accumulation of biological remains, organic matter or organism-mediated mineral precipitation.

  • Fossiliferous limestone

  • Chalk

  • Coal

Important textures and structures

FeatureDescription

Sorting

Describes the range of grain sizes within a sedimentary deposit.

Roundness

Describes the smoothness of grain edges and corners, which may reflect transport and abrasion history.

Bedding

Layering produced by changes in sediment supply, depositional energy or environmental conditions.

Cross-bedding

Inclined internal layers produced by migrating ripples or dunes.

Graded bedding

A vertical grain-size change within a bed, commonly associated with changing transport energy.

Fossils

Preserved remains or traces of organisms that provide evidence of past biological and environmental conditions.

Important controls

  • Source-rock composition and weathering conditions.

  • Climate and hydrological conditions.

  • Transport medium and energy.

  • Sediment supply and depositional environment.

  • Burial depth and duration.

  • Pore-fluid chemistry and diagenetic reactions.

Geological significance

  • Preserves records of ancient landscapes, oceans, rivers and climates.

  • Contains fossils and evidence of biological evolution.

  • Provides information about sediment provenance and tectonic history.

  • Hosts important groundwater and hydrocarbon reservoirs.

  • Records changes in sea level, basin subsidence and environmental conditions.

Metamorphic rock system

Definition

The metamorphic rock system consists of rocks formed when pre-existing rocks undergo mineralogical, chemical, textural or structural transformation under changed pressure, temperature, deformation and fluid conditions without complete melting.

Formation processes

ProcessDescription

Recrystallization

Mineral grains change size, shape or arrangement while retaining their basic chemical identity.

Neocrystallization

New minerals develop through reactions among existing minerals and fluids.

Deformation

Stress changes the shape, orientation and arrangement of minerals and may produce foliation or banding.

Metasomatism

Chemical components are introduced or removed through fluid-rock interaction.

Partial melting

Some minerals melt while others remain solid, producing melt-bearing metamorphic rocks such as migmatites under suitable conditions.

Major types

TypeDescriptionExamples

Regional metamorphism

Occurs over extensive areas, commonly associated with crustal thickening, mountain building and tectonic burial.

  • Schist

  • Gneiss

  • Amphibolite

Contact metamorphism

Develops when surrounding rocks are heated by an igneous intrusion.

  • Hornfels

  • Contact-metamorphosed marble

Dynamic metamorphism

Associated with intense deformation and localized high strain, commonly along fault zones.

  • Mylonite

  • Cataclasite

Burial metamorphism

Develops as sedimentary or volcanic materials are buried and exposed to increasing temperature and pressure.

  • Low-grade metamorphic rocks

Hydrothermal metamorphism

Involves chemical and mineralogical alteration through the circulation of heated fluids.

  • Altered basalt

  • Hydrothermally altered volcanic rocks

Metamorphic facies

FaciesGeneral conditionsSignificanceTypical minerals

Zeolite

Very low-grade metamorphic conditions.

Commonly associated with low-temperature alteration of suitable volcanic and sedimentary protoliths.

Greenschist

Low- to moderate-temperature metamorphism under suitable pressure conditions.

  • Chlorite

  • Actinolite

  • Epidote

  • Albite

Amphibolite

Moderate- to high-temperature metamorphism for appropriate bulk compositions.

  • Hornblende

  • Plagioclase

Granulite

High-temperature metamorphic conditions, commonly with relatively limited hydrous mineral stability.

  • Pyroxene

  • Plagioclase

  • Garnet

Blueschist

High-pressure, relatively low-temperature conditions, commonly associated with subduction zones.

  • Glaucophane

  • Lawsonite

  • Jadeite

Eclogite

High-pressure metamorphic conditions.

  • Garnet

  • Omphacitic pyroxene

Important controls

  • Temperature and pressure.

  • Original rock composition or protolith.

  • Duration of metamorphism.

  • Fluid availability and composition.

  • Differential stress and deformation.

  • Heating and cooling history.

Geological significance

  • Records burial and exhumation histories.

  • Provides evidence of mountain building and tectonic processes.

  • Reveals pressure-temperature conditions in the crust and subducted lithosphere.

  • Helps explain crustal differentiation and partial melting.

  • Preserves evidence of fluid movement and chemical exchange.

Comparison of three rock systems

FeatureIgneousSedimentaryMetamorphic

Primary formation process

Cooling and solidification of magma or lava.

Sediment accumulation, lithification or chemical and biological precipitation.

Solid-state transformation of pre-existing rocks.

Original material

Molten rock material.

Sediment, dissolved substances or biological material.

Pre-existing igneous, sedimentary or metamorphic rock.

Main controls

Melting, magma composition, pressure, temperature and cooling rate.

Weathering, transport, deposition, burial and pore-fluid chemistry.

Pressure, temperature, stress, fluids and original composition.

Common textures

Crystalline, fine-grained, coarse-grained, porphyritic, glassy and vesicular.

Clastic, granular, layered, fossiliferous and cemented.

Foliated, banded, granoblastic and recrystallized.

Typical structures

Flow structures, vesicles, joints and intrusive contacts.

Bedding, cross-bedding, ripple marks and graded bedding.

Foliation, lineation, compositional banding and mineral segregation.

Examples

Granite, basalt, gabbro and rhyolite.

Sandstone, shale, limestone and conglomerate.

Slate, schist, gneiss, marble and quartzite.

Typical geological environments

Volcanic regions, mid-ocean ridges, subduction zones and intrusive crustal bodies.

Rivers, lakes, deserts, deltas, beaches and marine basins.

Mountain belts, contact aureoles, fault zones and deeply buried crust.

Key scientific evidence

Mineral assemblages, crystallization textures, chemical composition and isotopic signatures.

Grain characteristics, sedimentary structures, fossils, provenance and diagenetic features.

Mineral assemblages, reaction textures, foliation and pressure-temperature indicators.

Relationships between rock systems

RelationshipExplanation

Igneous and sedimentary systems

Igneous rocks exposed at the surface can weather and erode, producing sediment that may eventually become sedimentary rock.

Sedimentary and metamorphic systems

Sedimentary rocks may be buried and transformed through metamorphism as temperature, pressure and deformation increase.

Igneous and metamorphic systems

Igneous rocks may undergo metamorphism, while metamorphic rocks may partially melt and generate magma.

All three systems

Any rock group may be uplifted, exposed and weathered, allowing its materials to enter sedimentary systems.

Illustrative geological examples

ExampleDescription

Oceanic crust formation

At mid-ocean ridges, mantle-derived magma crystallizes into basalt and gabbro, forming new oceanic crust. These rocks may later be altered by seawater, buried, metamorphosed or recycled through subduction.

Mountain belt development

Continental collision can bury and deform rocks, producing metamorphic assemblages and sometimes crustal melting. Uplift and erosion subsequently expose these rocks and supply sediment to surrounding basins.

Sedimentary basin evolution

Weathering and erosion supply sediment to a subsiding basin. Deposition and burial produce sedimentary rocks, while deeper burial may cause diagenesis or metamorphism depending on the conditions reached.

Volcanic island development

Repeated eruptions build volcanic rocks. Weathering, erosion and biological activity may produce sedimentary deposits around the island, while later intrusions and burial may alter earlier rocks.

Limitations and considerations

  • The three groups are based on genetic processes, but natural rocks may record multiple stages of formation and alteration.

  • Some rocks, especially migmatites, preserve evidence of both metamorphism and partial melting, creating complex classification problems.

  • Not every igneous rock has large visible crystals, and not every sedimentary rock contains obvious bedding or fossils.

  • Metamorphic rocks may retain parts of their original textures and structures, particularly at low metamorphic grades.

  • The three-system model simplifies a complex geological continuum and should be combined with detailed petrographic and field evidence.

  • Classification should account for the possibility of alteration, weathering, deformation and incomplete preservation.

Reference

  • Winter, J. D. Principles of Igneous and Metamorphic Petrology. Pearson.

  • Best, M. G. Igneous and Metamorphic Petrology. Wiley-Blackwell.

  • Tucker, M. E. Sedimentary Rocks in the Field. Wiley.

  • Philpotts, A. R., and Ague, J. J. Principles of Igneous and Metamorphic Petrology. Cambridge University Press.

  • Fossen, H. Structural Geology. Cambridge University Press.

Related Topic

  • Introduction to Petrology

  • Rocks as Geological Materials

  • Fundamental Principles of Rock Formation

  • The Rock Cycle and Geological Transformation

  • Classification of Rocks: An Overview

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Petrology