✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-EAR-006-009

Earthquakes as Natural Geophysical Phenomena

Earthquakes are natural geophysical phenomena involving the sudden release or redistribution of mechanical energy within Earth, most commonly through fault movement. They result from the interaction of tectonic forces, rock deformation, friction, stress accumulation and geological structures. Earthquakes generate seismic waves that propagate through the planet and produce ground motion at the surface. Their occurrence, depth, magnitude, mechanisms and spatial distribution provide important evidence about Earth's dynamic behaviour, plate tectonics and internal physical properties.

M₀ = μAD; Mʷ = (2/3)[log₁₀(M₀) − 9.1] when M₀ is measured in N·m.

Explanation

An earthquake is a natural geophysical event characterized by ground shaking caused by the rapid release or redistribution of energy within Earth. Most earthquakes occur when accumulated stress causes rocks on opposite sides of a fault to move suddenly relative to one another. This movement generates seismic waves that travel through the crust, mantle and along Earth's surface. Earthquakes may also be associated with volcanic activity, landslides, collapse processes and other geological mechanisms.

Earthquakes are part of Earth's continuous geodynamic activity. The planet's lithosphere is subjected to forces associated with plate motion, gravitational effects, thermal processes and regional tectonic deformation. These forces produce stress within rocks. Depending on the local mechanical conditions, rocks may deform elastically, fracture, slide along existing faults or undergo ductile deformation. When a fault experiences rapid slip, seismic energy is radiated into the surrounding Earth.

The elastic rebound model explains an important part of earthquake generation. Before an earthquake, tectonic forces may gradually deform rocks on either side of a fault. If the fault is locked or partially locked, the surrounding rocks can accumulate elastic strain. When the fault begins to slip, part of the stored elastic strain energy is released. The surrounding rock mass undergoes sudden displacement, and seismic waves propagate away from the rupture region.

The earthquake source is not always a single mathematical point. A small earthquake may rupture a relatively small fault area, whereas a large earthquake may involve a fault surface extending over hundreds of kilometres. The hypocentre represents the initial point of rupture, while the complete rupture may propagate away from it. The epicentre is the point on the Earth's surface directly above the hypocentre. Understanding the difference between these terms is important when interpreting earthquake locations and damage patterns.

Earthquakes produce several types of seismic waves. P waves are compressional body waves that generally travel fastest. S waves are shear body waves that propagate through solids but not ordinary liquids. Love and Rayleigh waves travel along or near Earth's surface and may contribute strongly to ground shaking. Their relative arrival times and waveform characteristics provide information about earthquake location, source properties and subsurface structure.

The energy released during an earthquake is distributed among radiated seismic waves, frictional heating, fracture formation, permanent deformation and other processes. Seismic moment is a physical measure of earthquake-source size that depends on the shear modulus, ruptured fault area and average slip. Moment magnitude is derived from seismic moment and provides a widely used logarithmic measure of earthquake size. It should not be confused with earthquake intensity, which describes the observed effects of shaking at a particular location.

Earthquakes are classified by several characteristics. Their depth may be shallow, intermediate or deep. Their tectonic setting may be associated with divergent, convergent or transform plate boundaries, or with deformation within plate interiors. Their focal mechanisms may indicate normal, reverse, thrust or strike-slip faulting. Their magnitude can range from very small microearthquakes to great earthquakes with extensive fault rupture.

The global distribution of earthquakes is strongly related to plate tectonics. Concentrated seismic belts occur around the Pacific Ocean, along mid-ocean ridges, through continental collision zones and along major transform systems. Subduction zones are especially important because they can produce shallow, intermediate-depth and deep-focus earthquakes. Intraplate earthquakes also occur where inherited geological structures are reactivated or regional stresses are transmitted into plate interiors.

Not all earthquakes are caused by natural tectonic processes. Some earthquakes are induced or triggered by human activities that alter subsurface stress or pore-fluid pressure. Examples include certain fluid-injection operations, reservoir impoundment, mining and geothermal activities. These events are still geophysical phenomena, but their occurrence may be influenced by human-caused changes to geological conditions. Their study requires careful evaluation of timing, spatial relationships, physical mechanisms and alternative explanations.

Earthquakes can produce a range of secondary hazards. Strong shaking may damage buildings and infrastructure, trigger landslides, cause soil liquefaction, disrupt transport systems and damage utilities. Underwater earthquakes that cause substantial vertical displacement of the seafloor may generate tsunamis. The actual consequences depend on earthquake size, depth, rupture geometry, distance, local geology, building vulnerability and exposure.

Earthquake sequences may include foreshocks, a mainshock and aftershocks. Foreshocks are smaller earthquakes that occur before a larger event in the same sequence, but they can only be identified confidently as foreshocks after the larger event occurs. Aftershocks occur following a mainshock and are commonly associated with stress changes and adjustment within and around the ruptured region. Not every earthquake sequence contains a clearly identifiable foreshock.

Earthquakes are scientifically important because they provide natural sources of seismic waves that travel through Earth's interior. Their recordings allow researchers to investigate the crust, mantle and core, determine active tectonic structures and study the physical behaviour of rocks under stress. They also provide information needed for seismic hazard assessment, earthquake-resistant engineering and disaster preparedness.

Although scientists can monitor seismicity and estimate earthquake probabilities over specified periods, the exact time, location and magnitude of an individual future earthquake cannot currently be predicted reliably. Responsible earthquake science therefore focuses on understanding earthquake processes, identifying hazardous regions, estimating probabilistic ground motion, improving construction practices and strengthening preparedness.

Variables

SymbolMeaningUnit

M₀

Seismic moment, a measure of the physical size of an earthquake source.

N·m

μ

Shear modulus of the rocks surrounding the fault.

Pa

A

Area of the fault surface that slipped during the earthquake.

m²

D

Average displacement or slip across the ruptured fault area.

m

Mʷ

Moment magnitude, a logarithmic measure of earthquake size.

Dimensionless magnitude

Example or application

A worked example has not yet been added.

Definition

An earthquake is a natural geophysical phenomenon involving the sudden release or redistribution of energy within Earth, most commonly through rapid movement along a fault, which generates seismic waves and produces ground motion.

Purpose

The purpose of studying earthquakes as natural geophysical phenomena is to explain their physical origin, identify the geological and tectonic conditions responsible for their occurrence, understand how seismic energy propagates and examine their consequences for Earth's surface and human societies.

Importance

Earthquakes are fundamental indicators of Earth's internal activity and tectonic evolution. Their locations, depths, mechanisms and seismic-wave patterns provide evidence about plate boundaries, fault systems and internal planetary structure. Studying them also supports seismic hazard assessment, engineering design, early-warning development, emergency planning and the understanding of secondary hazards such as landslides, liquefaction and tsunamis.

Physical Origin And Mechanism

Tectonic Forces

Relative plate motion, gravitational forces, lithospheric loading and regional deformation produce stresses within the Earth's crust and uppermost mantle.

Stress Accumulation

Rocks may gradually accumulate elastic strain as tectonic forces act over long periods, especially where fault surfaces are locked or partially locked.

Fault Strength

The resistance of a fault to sliding depends on friction, normal stress, surface roughness, mineral composition, temperature, fluid pressure and other physical conditions.

Rupture Initiation

When local conditions permit unstable or sufficiently rapid slip, rupture begins on part of the fault surface.

Rupture Propagation

The rupture may spread across a larger fault area, producing displacement and changing the stress distribution around the source.

Seismic Radiation

The sudden mechanical disturbance radiates elastic waves through the surrounding material.

Post Earthquake Adjustment

After the main rupture, the crust may continue adjusting through aftershocks, afterslip, viscoelastic relaxation and fluid-related processes.

Elastic Rebound Theory

Definition

Elastic rebound theory explains how rocks deform under tectonic stress and partially recover their elastic deformation when a fault suddenly slips.

Historical Development

The theory is strongly associated with Harry Fielding Reid's investigation of the 1906 San Francisco earthquake and the observed deformation around the San Andreas Fault.

Stages

StageNameDescription

1

Tectonic loading

Regional tectonic forces act on rocks and fault systems over time.

2

Elastic deformation

Rocks on either side of a locked or partially locked fault gradually deform and accumulate elastic strain.

3

Fault failure

When local conditions permit rapid slip, the fault undergoes sudden displacement.

4

Energy release

Part of the stored elastic strain energy is released, with energy distributed among seismic waves, heat, fracture and permanent deformation.

5

Post-earthquake state

The fault and surrounding rocks occupy a changed configuration, and additional deformation may continue after the main event.

Scientific Significance

The model explains why earthquakes can occur after long periods of apparently limited fault movement and connects long-term tectonic deformation with rapid seismic rupture.

Limitations

Real fault systems are more complex than a single elastic block model. Fault creep, distributed deformation, variable friction, fluid pressure and interactions among multiple faults can modify the loading and rupture process.

Classification Of Earthquakes

By Cause

TypeDescription

Tectonic earthquakes

Earthquakes generated by fault movement associated with tectonic stress and deformation. They account for most significant earthquakes worldwide.

Volcanic earthquakes

Earthquakes associated with volcanic processes such as magma movement, fluid pressure changes, fracturing and volcanic activity.

Collapse earthquakes

Small seismic events associated with the collapse of underground cavities, mines, caves or other subsurface voids.

Induced earthquakes

Earthquakes influenced by human activities that change subsurface stress or fluid-pressure conditions.

Triggered earthquakes

Earthquakes whose occurrence may be advanced or influenced by stress changes from another event or process, depending on the physical conditions of the receiving fault.

By Depth

TypeRangeDescription

Shallow-focus

Approximately 0–70 km

Occur in many tectonic environments and can produce damaging shaking when located near populated areas.

Intermediate-focus

Approximately 70–300 km

Frequently occur within descending lithospheric slabs at subduction zones.

Deep-focus

Approximately 300–700 km

Occur mainly within subducting slabs and provide information about the mechanical behaviour of lithosphere at high pressure.

By Fault Movement

TypeDescription

Normal-fault earthquake

Associated with downward movement of the hanging wall relative to the footwall and commonly linked to extension.

Reverse or thrust-fault earthquake

Associated with upward movement of the hanging wall relative to the footwall and commonly linked to compression.

Strike-slip earthquake

Associated with predominantly horizontal movement along a fault.

Oblique-slip earthquake

Associated with a combination of vertical and horizontal fault displacement.

Seismic Waves Generated By Earthquakes

Wave TypeFull NameMotionPropagation MediumCharacteristics

P waves

Primary or compressional waves

Particle motion is approximately parallel to the direction of propagation.

Solids, liquids and gases.

Generally the fastest body waves and commonly the first seismic arrivals recorded at a station.

S waves

Secondary or shear waves

Particle motion is perpendicular to the direction of propagation.

Materials with non-zero shear rigidity, such as solids.

Usually arrive after P waves and provide important information about the shear properties of Earth materials.

Love waves

Love surface waves

Horizontal shear motion perpendicular to the direction of propagation.

Layered near-surface structures.

Can generate substantial horizontal ground motion.

Rayleigh waves

Rayleigh surface waves

Elliptical particle motion in a vertical plane containing the propagation direction.

Earth's surface and near-surface layers.

Produce combined vertical and horizontal motion and can contribute significantly to earthquake shaking.

Earthquake Source Parameters

ParameterDefinitionImportance

Hypocentre

The point within Earth where rupture begins.

Provides the initial source location for earthquake analysis.

Epicentre

The surface location vertically above the hypocentre.

Provides a geographical reference point, but is not necessarily the location of maximum damage.

Focal depth

The vertical depth of the earthquake hypocentre beneath Earth's surface.

Influences the distribution of ground shaking and helps identify the tectonic environment.

Magnitude

A quantitative measure of earthquake size based on an instrumentally defined or physically derived scale.

Allows comparison of earthquake-source sizes, particularly when the scale is appropriate for the event.

Seismic moment

A measure of the earthquake source based on shear modulus, fault rupture area and average slip.

Provides a physical basis for moment magnitude and source-size comparisons.

Focal mechanism

A representation of the orientation and sense of movement associated with an earthquake source.

Provides information about the faulting style and tectonic stress environment.

Rupture duration

The time over which significant fault rupture occurs.

Influences the duration and frequency characteristics of radiated seismic waves.

Earthquake Magnitude And Intensity

Magnitude

Magnitude describes the size of an earthquake source. Moment magnitude is widely used because it is based on seismic moment and is applicable across a broad range of earthquake sizes.

Intensity

Intensity describes the observed shaking and effects at a particular location. It may vary from place to place for the same earthquake.

Key Differences

  • Magnitude is a source-related measure, whereas intensity is location-dependent.

  • One earthquake is assigned a magnitude value for a specified magnitude scale, but it can produce different intensity values at different locations.

  • Local geology, distance, depth, building design and vulnerability influence observed intensity.

  • Magnitude scales are logarithmic, so a small numerical increase can represent a substantial increase in physical source size.

Earthquake Sequences

Event TypeDescription

Foreshock

An earthquake that occurs before a larger earthquake in the same sequence and is identified retrospectively when the larger event occurs.

Mainshock

The largest earthquake in a sequence under the conventional classification, although the sequence may continue to evolve.

Aftershock

An earthquake that occurs after the mainshock and is associated with adjustment and stress redistribution in the source region.

Earthquake swarm

A sequence of earthquakes without one clearly dominant mainshock, sometimes associated with volcanic, fluid-related or tectonic processes.

Global Distribution And Tectonic Significance

RegionDescription

Pacific Ring of Fire

A broad belt of seismic and volcanic activity around much of the Pacific Ocean, associated with multiple subduction and transform systems.

Mid-ocean ridges

Long underwater mountain systems where plates diverge and new oceanic crust forms, commonly accompanied by shallow earthquakes.

Alpine-Himalayan belt

A broad tectonic region associated with convergence and continental deformation extending from the Mediterranean region toward the Himalayas and Southeast Asia.

Continental transform systems

Regions where major strike-slip fault systems accommodate horizontal relative motion between crustal blocks.

Stable continental interiors

Regions where earthquakes may occur on reactivated ancient faults or other inherited weaknesses within a plate.

Secondary Earthquake Hazards

HazardDescription

Strong ground shaking

Seismic waves cause rapid ground motion that can damage buildings, bridges, utilities and other infrastructure.

Surface fault rupture

Fault movement reaches the surface and produces permanent displacement that may affect structures crossing the rupture zone.

Liquefaction

Shaking can increase pore-water pressure in susceptible saturated granular soils, reducing their effective stress and strength.

Earthquake-induced landslides

Ground shaking can destabilize slopes and trigger landslides in susceptible terrain.

Tsunamis

Submarine earthquakes may generate tsunamis when seafloor displacement significantly disturbs the overlying water column.

Ground settlement

Shaking and soil deformation may cause settlement or differential movement that affects foundations and infrastructure.

Fires and infrastructure disruption

Damage to electrical, gas, transport and water systems can produce secondary emergencies and long-lasting disruption.

Natural And Human Influenced Seismicity

Natural Seismicity

Most global seismic activity is associated with natural tectonic processes, including plate-boundary movement, crustal deformation and volcanic systems.

Induced Seismicity

Human activities can change subsurface stresses or fluid pressures and may influence earthquake occurrence in some geological settings.

Possible Human Influences

  • Fluid injection into deep geological formations.

  • Some geothermal operations.

  • Reservoir impoundment behind large dams.

  • Mining and extraction-related changes in stress.

  • Fluid withdrawal and changes in subsurface pressure.

Scientific Caution

A temporal association between an industrial activity and an earthquake is not sufficient by itself to establish causation. Investigation requires geological context, physical mechanisms, seismic observations and appropriate statistical analysis.

Earthquake Monitoring And Scientific Investigation

MethodDescription

Seismic network monitoring

Uses multiple seismometers to detect earthquakes, locate hypocentres and analyse seismic-wave patterns.

Strong-motion recording

Measures ground acceleration during intense shaking and provides information for engineering applications.

GNSS geodesy

Measures surface displacement and deformation associated with tectonic loading and earthquake rupture.

Satellite radar interferometry

Maps spatial patterns of surface displacement using repeated radar observations.

Geological field investigation

Examines fault scarps, surface ruptures, displaced layers and other geological evidence.

Seismic tomography

Uses seismic observations to investigate internal variations in Earth's physical properties.

Applications

  • Understanding the physical mechanisms of earthquake generation.

  • Investigating tectonic plate movement and active fault systems.

  • Determining earthquake magnitudes, depths, locations and focal mechanisms.

  • Imaging Earth's internal structure through seismic waves.

  • Assessing seismic hazards and potential ground-motion levels.

  • Supporting earthquake-resistant structural design.

  • Investigating induced seismicity and volcanic activity.

  • Evaluating secondary hazards such as liquefaction, landslides and tsunamis.

  • Developing earthquake early-warning and monitoring systems.

  • Improving emergency preparedness and disaster-risk reduction.

Limitations And Challenges

  • Earthquake rupture occurs underground and is generally inferred indirectly from seismic and geodetic observations.

  • The physical conditions controlling earthquake initiation and rupture propagation are complex and vary among faults.

  • Earthquake records may be too short to capture the full recurrence history of large events.

  • Magnitude estimates and earthquake locations contain uncertainties that depend on instrument coverage and analysis methods.

  • The same earthquake may produce very different levels of shaking and damage at different locations.

  • Induced seismicity can be difficult to distinguish from naturally occurring seismicity without adequate baseline observations and physical analysis.

  • Secondary hazards depend on local geological, hydrological, topographical and infrastructural conditions.

  • Exact prediction of an individual future earthquake remains beyond current reliable scientific capability.

Reference

  • Shearer, P. M. Introduction to Seismology. Cambridge University Press.

  • Scholz, C. H. The Mechanics of Earthquakes and Faulting. Cambridge University Press.

  • Lay, T. and Wallace, T. C. Modern Global Seismology. Academic Press.

  • Stein, S. and Wysession, M. An Introduction to Seismology, Earthquakes, and Earth Structure. Blackwell Publishing.

  • US Geological Survey (USGS). Earthquake Hazards Program.

  • International Association of Seismology and Physics of the Earth's Interior (IASPEI).

Related Topic

  • Introduction to Seismology

  • Seismic Energy and Its Geological Significance

  • Global Seismic Activity and Distribution

  • Relationship Between Seismology and Plate Tectonics

  • Applications of Seismology

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Seismology