Engineering problem
An engineering problem is a situation in which an existing system, process or product fails to meet a need or where a new capability is required under specified technical and practical constraints.
Problem types
| Type | Description |
|---|---|
Analysis Problem | Determining the behavior or performance of an existing system when its characteristics and operating conditions are known. |
Design Problem | Developing a system or solution that satisfies a set of requirements. |
Optimization Problem | Selecting the best solution according to a defined objective while satisfying constraints. |
Troubleshooting Problem | Identifying the causes of an unexpected behavior, fault or performance failure. |
Research Problem | Investigating a technical question for which existing knowledge or models may be incomplete. |
Systems Integration Problem | Ensuring that different components and subsystems operate correctly together. |
Systematic problem solving method
| Step | Name | Description | Output |
|---|---|---|---|
1 | Recognize the Problem | Identify the gap between the current condition and the desired condition. | A preliminary problem statement. |
2 | Define the Problem | Describe the problem precisely, including its scope, affected systems, requirements and boundaries. | A clear and measurable problem definition. |
3 | Gather Information | Collect relevant measurements, specifications, technical documentation, operating data and scientific information. | A reliable evidence base. |
4 | Identify Constraints | Determine technical, financial, safety, environmental, legal and time limitations. | A list of constraints and acceptance criteria. |
5 | Develop Possible Solutions | Generate alternative approaches using scientific reasoning, design methods and relevant experience. | A set of candidate solutions. |
6 | Model and Analyze | Use mathematical equations, physical models, simulation or experiments to predict the behavior of candidate solutions. | Predicted performance and technical evidence. |
7 | Evaluate Alternatives | Compare solutions according to performance, safety, cost, reliability, sustainability and feasibility. | A justified preferred solution. |
8 | Implement the Solution | Develop, construct, configure or modify the selected system using appropriate procedures. | An implemented engineering solution. |
9 | Test and Verify | Measure performance and determine whether the solution satisfies the defined requirements. | Test results and verification evidence. |
10 | Review and Improve | Analyze results, correct weaknesses, document decisions and identify future improvements. | A validated and documented solution or an improved design. |
Problem solving tools
| Tool | Purpose |
|---|---|
Root Cause Analysis | Identify the underlying causes of a problem rather than only addressing its visible symptoms. |
Five Whys | Explore a chain of possible causes by repeatedly asking why an issue occurred. |
Fishbone Diagram | Organize potential causes into categories for systematic investigation. |
Pareto Analysis | Prioritize significant causes or problems based on their measured contribution. |
Failure Mode and Effects Analysis | Identify potential failure modes, their effects and suitable risk-reduction actions. |
Decision Matrix | Compare candidate solutions against weighted evaluation criteria. |
Simulation | Study system behavior under selected conditions without immediately constructing a complete physical system. |
Experimental Testing | Collect physical evidence to evaluate predictions and verify performance. |
Engineering problem characteristics
Problems may have incomplete or uncertain information.
Several solutions may be technically acceptable.
Different requirements may conflict.
A solution may need to balance cost, performance, safety and environmental impact.
The final result must be justified using evidence and engineering judgment.
Verification and validation
Verification
Checks whether the solution conforms to specified requirements and design specifications.
Validation
Checks whether the solution actually satisfies the intended need in its intended context.
Distinction
A system may meet its written specifications but still fail to address the user's real problem.