electrical_engineering_foundation · SCI-ENG-002-009Electrical Resistance and Conductance
Explains electrical resistance and conductance, their physical origins, mathematical relationships, material dependence and significance in electrical circuit design.
R = V/I; G = 1/R; R = ρL/A
Explanation
Resistance
Electrical resistance describes how strongly a component or material opposes electric current under specified conditions.
Conductance
Electrical conductance describes how readily an element permits current to flow. It is the reciprocal of resistance for a linear resistive element.
Physical origin
Moving charge carriers interact with the atomic structure of a material.
Scattering processes affect carrier motion.
These interactions produce electrical resistance and energy dissipation.
Material composition, temperature and geometry influence the resulting resistance.
Resistance factors
| Factor | Effect |
|---|
Length | For a uniform conductor, resistance increases with length. |
Cross-sectional Area | For a uniform conductor, resistance decreases as cross-sectional area increases. |
Material Resistivity | Materials with greater resistivity generally have greater resistance for the same geometry. |
Temperature | Temperature affects resistance. Many metallic conductors have higher resistance at higher temperatures, while other materials may behave differently. |
Linear and nonlinear behavior
An ohmic resistor has a linear voltage-current relationship over its specified operating range. Non-ohmic devices, such as many semiconductor devices, do not maintain a constant resistance under all operating conditions.
Measurement
Resistance can be measured using an ohmmeter or calculated from suitable voltage and current measurements. An ohmmeter is normally used on a de-energized circuit.
Variables
R
Electrical resistance, measured in ohms (Ω).
V
Potential difference, measured in volts (V).
I
Current, measured in amperes (A).
G
Conductance, measured in siemens (S).
Ρ
Electrical resistivity, measured in ohm-metres (Ω·m).
L
Conductor length, measured in metres (m).
A
Cross-sectional area, measured in square metres (m²).
Example or application
Scenario
A 12 V source is connected across a 4 Ω resistor.
Calculation
Use R = V/I, rearranged as I = V/R.
Substitute: I = 12 V / 4 Ω.
The current is 3 A.
Conductance is G = 1/R = 1/4 S = 0.25 S.
Learning point
Resistance and conductance describe opposite aspects of an element's ability to carry electric current.
Definition
Electrical resistance is the ratio of voltage across an element to current through it under linear ohmic conditions. Conductance is the reciprocal of resistance.
Purpose
Explain the opposition to current flow.
Understand the relationship between resistance and conductance.
Determine how material and geometry affect conductor resistance.
Importance
Resistance affects current distribution and circuit performance.
It determines resistive voltage drops and power dissipation.
Conductance is useful in circuit analysis and network calculations.
Resistivity data helps engineers select suitable conductor materials.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Nilsson, J. W. and Riedel, S. A. Electric Circuits.
- Alexander, C. K. and Sadiku, M. N. O. Fundamentals of Electric Circuits.
- Callister, W. D. and Rethwisch, D. G. Materials Science and Engineering: An Introduction.
Suggest a correction or source · More in Electrical Engineering