✦ScienexySCIENCE KNOWLEDGE LIBRARY
chemical_engineering · SCI-ENG-004-007

Chemical Engineering Systems and Processes

An explanation of chemical engineering systems, process boundaries, process inputs and outputs, equipment connections, operating modes and process flow structures.

Explanation

Introduction

A chemical engineering system is an organized collection of equipment, materials, energy flows and control elements that work together to perform a defined processing function. A process describes the sequence of operations through which materials or energy are transformed or transferred.

Definitions

System

A defined portion of the physical world selected for engineering analysis.

Process

A sequence of operations or transformations that changes the state, composition, temperature, pressure or other properties of a material.

Process Unit

An individual item of equipment or an operation that performs a specific function within a larger process.

System Boundary

An imaginary or physical boundary separating the system under analysis from its surroundings.

System Components

ComponentDescription

Feed Stream

The material entering a process or equipment unit.

Processing Equipment

Equipment such as reactors, separators, heat exchangers, pumps and mixers that performs process operations.

Product Stream

The material leaving a process as a desired product or useful output.

Byproduct and Waste Streams

Additional outputs that may require recovery, treatment, recycling or controlled disposal.

Energy Supply

Heat, electricity, mechanical work or other energy supplied to the system.

Control and Measurement Systems

Sensors, controllers and control elements used to monitor and regulate operating conditions.

System Classifications

TypeDescriptionExample

Open System

A system that can exchange both mass and energy with its surroundings.

A continuously operated mixing tank with inlet and outlet streams.

Closed System

A system that exchanges energy but not mass across its boundary.

A sealed vessel being heated.

Isolated System

An idealized system that exchanges neither mass nor energy with its surroundings.

An ideal perfectly insulated and sealed system.

Process Operating Modes

ModeDescriptionExample

Batch Process

A specified quantity of material is processed in a vessel over a defined operating cycle.

A batch mixing or batch reaction operation.

Continuous Process

Materials continuously enter and leave the process during normal operation.

A continuously operated water treatment or refinery unit.

Semi-Batch Process

Some materials are initially charged or retained while one or more additional streams enter or leave during operation.

A vessel in which a feed is gradually added during a processing period.

Process Flow Concepts

  • Feed preparation

  • Main processing operation

  • Product separation and recovery

  • Product purification

  • Recycle and recovery

  • Waste treatment

  • Product storage and distribution

Worked Example

System

Industrial Water Treatment System

Steps

  • Raw water enters the system.

  • Preliminary treatment removes selected suspended materials.

  • Further treatment operations improve water quality.

  • Disinfection or other suitable final treatment is applied when required.

  • Treated water is monitored against its intended quality specifications.

  • Residual streams are managed appropriately.

Engineering Considerations

  • Water flow rate

  • Feed water quality

  • Treatment efficiency

  • Energy consumption

  • Residual management

  • Monitoring and control

Importance

Understanding process systems enables engineers to identify system boundaries, organize equipment, establish material and energy flows and analyze overall performance.

Common Misconceptions

MisconceptionClarification

A process and a system always mean exactly the same thing.

A system defines what is being studied, while a process describes the operations or transformations occurring within it.

A closed system cannot exchange energy.

A closed system can exchange heat or work with its surroundings but cannot exchange mass across its boundary.

Practice

  • Define a chemical engineering system and a process.

  • Differentiate open, closed and isolated systems.

  • Compare batch, continuous and semi-batch processes.

  • Identify the input, output and system boundary of a water treatment process.

Example or application

A worked example has not yet been added.

Importance

This topic provides the framework for understanding how individual process units combine into complete industrial systems.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Elementary Principles of Chemical Processes by Felder, Rousseau and Bullard
  • Basic Principles and Calculations in Chemical Engineering by David M. Himmelblau and James B. Riggs
  • Perry's Chemical Engineers' Handbook

Suggest a correction or source · More in Chemical Engineering