✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-ENG-006-011

Semiconductors and Electronic Materials

Semiconductors and electronic materials are materials whose electrical, optical, magnetic, and thermal characteristics can be controlled or engineered to perform specific electronic and information-processing functions. This field investigates how atomic bonding, electronic band structure, defects, impurities, interfaces, and fabrication processes determine material behavior in devices such as diodes, transistors, integrated circuits, solar cells, sensors, LEDs, and memory systems. It connects solid-state physics, chemistry, materials engineering, electrical engineering, and nanotechnology.

Conductivity

Expression

\sigma = q(n\mu_n + p\mu_p)

Explanation

For a semiconductor in the ordinary low-field transport regime, electrical conductivity can be approximated as the sum of electron and hole contributions. Each contribution depends on the magnitude of the elementary charge, carrier concentration, and carrier mobility.

Conditions

This expression assumes a conventional semiconductor transport description in which electron and hole populations and mobilities can be meaningfully defined. More complex materials may require tensor descriptions, multiple carrier bands, or additional transport terms.

Resistivity

Expression

\rho = \frac{1}{\sigma}

Explanation

For an isotropic material in the ordinary linear-response regime, resistivity is the reciprocal of electrical conductivity.

Drift velocity

Expression

v_d = \mu E

Explanation

The magnitude of the average carrier drift velocity is proportional to carrier mobility and applied electric-field magnitude in the low-field regime. The physical direction depends on the carrier charge.

Intrinsic carrier concentration

Expression

n_i^2 = np

Explanation

For a non-degenerate semiconductor in thermal equilibrium, the product of electron and hole concentrations equals the square of the intrinsic carrier concentration.

Conditions

This mass-action relationship applies under thermal equilibrium and the stated semiconductor approximation. It should not be applied directly to strongly non-equilibrium carrier populations.

Carrier drift current density

Expression

J_{n,drift} = qn\mu_n E

Explanation

The magnitude of the electron drift-current density in the conventional low-field model depends on elementary charge, electron concentration, electron mobility, and electric-field magnitude. Current direction is described using conventional current rather than electron-motion direction.

Explanation

1 fundamental concept

Overview

Electronic materials are selected, designed, and processed to control the movement, storage, conversion, detection, or interaction of electrical charge and electromagnetic energy. Their behavior depends on the availability and mobility of charge carriers, the arrangement of atoms, electronic energy states, and interactions with external electric, magnetic, optical, and thermal conditions.

Semiconductor definition in context

A semiconductor is a material whose electrical conductivity generally lies between that of a good electrical conductor and an electrical insulator. More importantly, its conductivity can be controlled through temperature, illumination, electric fields, chemical doping, and structural engineering. This controllability makes semiconductors essential for modern electronic devices.

Why control matters

  • A semiconductor can be engineered to conduct electricity in selected regions while restricting current in others.

  • The concentration and type of charge carriers can be adjusted through doping.

  • Interfaces between differently doped regions can create rectifying junctions and other useful electrical behaviors.

  • Light can generate mobile charge carriers, enabling photodetectors and solar cells.

  • Electric fields can control carrier movement, enabling transistor switching and amplification.

Electronic materials and semiconductors

Semiconductors are one important class of electronic materials, but electronic materials also include conductors, insulators, dielectric materials, magnetic materials, superconductors, and materials designed for optical and electrochemical functions.

2 electronic structure and energy bands

Atomic energy levels

An isolated atom has electrons occupying discrete energy levels. When a very large number of atoms form a solid, their electronic states interact and broaden into closely spaced energy ranges called energy bands. The resulting band structure strongly influences whether electrons can move through the material under an applied electric field.

Valence band

The valence band is the energy band associated with electronic states that are normally occupied by valence electrons in a material under equilibrium conditions. Its occupation and relationship with other bands influence bonding and electrical behavior.

Conduction band

The conduction band is an energy band containing electronic states in which electrons can move through the material and contribute to electrical conduction. In a semiconductor, electrons can enter this band after receiving sufficient energy.

Band gap

Definition

The band gap is the energy separation between the top of the valence band and the bottom of the conduction band in a semiconductor or insulator.

Physical significance

A sufficiently large band gap makes it difficult for electrons to enter conducting states under ordinary conditions. A smaller band gap allows more electrons to be thermally or optically excited into the conduction band. The magnitude and structure of the band gap influence electrical conductivity, optical absorption, emission, operating temperature, and device applications.

Direct band gap

In a direct-band-gap semiconductor, the valence-band maximum and conduction-band minimum occur at the same crystal momentum. Electron transitions between these band edges can occur through photon absorption or emission without requiring a change in crystal momentum supplied by a phonon. This often makes direct-band-gap materials suitable for light-emitting devices.

Indirect band gap

In an indirect-band-gap semiconductor, the valence-band maximum and conduction-band minimum occur at different crystal momenta. Optical transitions near the band edges generally require phonon participation to conserve momentum. This makes radiative emission less probable than in comparable direct-band-gap materials, although indirect-band-gap materials can still be excellent for electronic and photovoltaic applications.

Band gap engineering

Band-gap engineering involves changing the effective electronic energy structure through alloy composition, strain, quantum confinement, heterostructures, or other material-design methods. It is used to tailor optical absorption, carrier confinement, and electronic transport.

Band based material classification

Conductors

Conductors generally have partially filled bands or overlapping valence and conduction bands, allowing electrons to respond readily to an applied electric field.

Semiconductors

Semiconductors possess a relatively small band gap compared with ordinary insulators. Their carrier concentration can be strongly influenced by temperature, light, and doping.

Insulators

Insulators generally have a large band gap and very low electrical conductivity under ordinary conditions because relatively few charge carriers are available for conduction.

Important caution

The boundaries between these classes are not determined by one universal conductivity threshold. Temperature, composition, defects, frequency, electric field, and measurement conditions can significantly affect electrical behavior.

3 charge carriers and electrical conduction

Electrons

Electrons are negatively charged particles that occupy available electronic states. In semiconductors, electrons excited into the conduction band can move in response to an electric field and contribute to current.

Holes

A hole is an effective positive charge carrier representing an unoccupied electronic state in an otherwise occupied valence band. Although a hole is not a separate positively charged particle in the same sense as a proton, treating it as a mobile positive carrier provides a useful and accurate description of semiconductor transport.

Electron hole pairs

When an electron receives sufficient energy to move from the valence band into the conduction band, it leaves behind a hole. The resulting electron-hole pair contributes to semiconductor carrier populations and can be generated thermally, optically, or through other excitation processes.

Carrier generation

  • Thermal generation occurs when thermal energy excites electrons across the band gap.

  • Optical generation occurs when absorbed photons provide sufficient energy to create electron-hole pairs.

  • Electrical injection occurs when carriers enter a semiconductor from an electrical contact or neighboring region.

  • Impact ionization can generate additional electron-hole pairs when sufficiently energetic carriers transfer energy to the lattice through collisions.

Carrier recombination

Recombination occurs when a conduction-band electron occupies an available hole state. Energy is released through radiative emission, phonon interactions, or other processes depending on the material and defect structure. Recombination affects solar-cell efficiency, LED emission, photodetector response, and transistor behavior.

Drift and diffusion

Drift

Drift is the movement of charge carriers under an applied electric field. Electrons and holes respond in opposite physical directions because their effective charges have opposite signs.

Diffusion

Diffusion is the movement of carriers from regions of higher concentration toward regions of lower concentration due to concentration gradients.

Combined transport

In practical semiconductor devices, drift and diffusion often occur simultaneously. Their balance determines current distributions, junction behavior, carrier collection, and device response.

Mobility

Carrier mobility measures how readily electrons or holes move through a material in response to an applied electric field. It depends on the band structure, effective mass, temperature, impurities, lattice vibrations, defects, and scattering mechanisms.

Scattering mechanisms

  • Phonon scattering arises from interactions with lattice vibrations and commonly becomes more significant as temperature increases.

  • Impurity scattering arises from interactions with ionized dopants and charged defects.

  • Defect and interface scattering can reduce carrier transport in imperfect crystals and nanoscale devices.

  • Grain-boundary scattering can influence electrical transport in polycrystalline semiconductor films.

4 intrinsic and extrinsic semiconductors

Intrinsic semiconductor

An intrinsic semiconductor is a chemically pure or sufficiently undoped semiconductor whose equilibrium carrier concentration is determined primarily by thermal excitation across its band gap. In an intrinsic material, electron and hole concentrations are equal under thermal equilibrium.

Extrinsic semiconductor

An extrinsic semiconductor has been intentionally doped or otherwise modified so that impurities or controlled defects significantly influence its carrier concentration and electrical behavior.

N type semiconductor

Definition

An n-type semiconductor contains donor impurities that contribute additional electrons to the conduction process.

Mechanism

In silicon, substitutional phosphorus has five valence electrons. Four participate in bonding with neighboring silicon atoms, while the remaining electron can be relatively easily excited into a conducting state. The donor concentration influences the electron population.

Majority carriers

Electrons are the majority carriers.

Minority carriers

Holes are the minority carriers.

Examples

  • Phosphorus-doped silicon

  • Arsenic-doped silicon

  • Antimony-doped silicon

P type semiconductor

Definition

A p-type semiconductor contains acceptor impurities that create available hole states in the valence-band system.

Mechanism

In silicon, substitutional boron has three valence electrons. It forms three ordinary covalent bonds with neighboring silicon atoms, leaving an electron deficiency that can be described as a mobile hole after appropriate electronic excitation.

Majority carriers

Holes are the majority carriers.

Minority carriers

Electrons are the minority carriers.

Examples

  • Boron-doped silicon

  • Aluminum-doped silicon in suitable semiconductor systems

  • Gallium-doped silicon

Doping

Definition

Doping is the controlled introduction of impurity atoms or other electrically active species into a semiconductor to modify its carrier concentration and electrical properties.

Substitutional doping

A dopant atom replaces a host atom at a lattice site. This is a common doping mechanism in crystalline silicon and other semiconductor materials.

Interstitial doping

A dopant or impurity occupies a position between regular lattice sites. Depending on the material, interstitial species may act as donors, acceptors, recombination centers, or structural defects.

Dopant activation

Not every introduced dopant necessarily contributes a mobile carrier. Its electrical activity depends on its chemical state, lattice position, energy level, compensation, and thermal history.

Compensation

When donor and acceptor impurities coexist, they can compensate one another. The net electrical behavior depends on their concentrations and activation states.

Important limitations

  • Excessive doping can increase impurity scattering and reduce mobility.

  • High dopant concentrations can alter band structure and create non-ideal behavior.

  • Dopant diffusion can blur carefully designed device junctions.

  • Defects and incomplete activation can make the electrical carrier concentration differ from the total chemical dopant concentration.

5 major semiconductor materials

Elemental semiconductors

Silicon

Silicon is the dominant material in mainstream integrated-circuit manufacturing because of its mature processing technology, suitable electronic properties, abundant supply, and the high quality of silicon dioxide that can be formed on its surface. Its indirect band gap makes it less suitable than direct-band-gap materials for efficient light emission.

Germanium

Germanium has a smaller band gap and higher carrier mobility than silicon under many conditions. It is useful in specialized high-speed electronics, infrared technologies, and silicon-germanium alloy systems, although its processing and thermal characteristics create different engineering trade-offs.

Other elemental materials

Other elemental semiconductors and semimetal-related materials are studied for specialized transport, optical, and quantum applications. Their usefulness depends on crystal structure, stability, processing requirements, and device objectives.

Compound semiconductors

Gallium arsenide

Gallium arsenide is a direct-band-gap compound semiconductor used in high-frequency electronics, optoelectronics, and selected photovoltaic technologies. It offers strong optical performance but is generally more expensive to manufacture at large scale than silicon.

Gallium nitride

Gallium nitride is a wide-band-gap semiconductor used in high-power, high-frequency, and optoelectronic devices, including blue LEDs and power electronics. Its high breakdown field and thermal characteristics make it valuable for demanding applications.

Silicon carbide

Silicon carbide is a wide-band-gap semiconductor with high thermal conductivity, high breakdown field, and strong high-temperature capability. It is important in power conversion systems, electric vehicles, industrial electronics, and high-temperature devices.

Indium phosphide

Indium phosphide is a direct-band-gap compound semiconductor used in high-speed optoelectronics, photonic integrated circuits, and telecommunications components.

Cadmium telluride

Cadmium telluride is a compound semiconductor used in thin-film photovoltaic technology. Its use requires careful management of cadmium-related environmental and material-handling concerns.

Alloy and emerging semiconductors

Alloy semiconductors

Alloy semiconductors combine two or more semiconductor constituents to adjust band gap, lattice parameter, refractive index, and other properties. Examples include aluminum gallium arsenide and indium gallium nitride.

Two dimensional semiconductors

Atomically thin semiconductors such as molybdenum disulfide are studied for their unusual optical and electronic behavior, potential low-dimensional devices, and compatibility with certain flexible or heterogeneous systems.

Organic semiconductors

Organic semiconductors use conjugated molecules or polymers to transport charge. They enable lightweight and potentially flexible electronic devices, organic LEDs, and certain printed electronic technologies.

Perovskite semiconductors

Metal-halide perovskite materials have attracted research interest because of their strong optical absorption and potential for efficient, solution-processable solar cells. Long-term stability, environmental concerns involving lead in many compositions, and scalable manufacturing remain important challenges.

6 semiconductor crystal structure and defects

Crystal lattice

A crystal lattice describes the periodic arrangement of atoms or other structural units in a crystalline solid. The lattice and basis together define the crystal structure and influence electronic band formation, mechanical behavior, and transport.

Diamond cubic structure

Silicon and germanium commonly crystallize in the diamond-cubic structure. Each atom forms four covalent bonds with neighboring atoms in a tetrahedral arrangement. This bonding structure is central to their electronic and mechanical behavior.

Zinc blende structure

Many compound semiconductors, including gallium arsenide, crystallize in the zinc-blende structure. It can be understood as two interpenetrating face-centered-cubic sublattices occupied by different atomic species.

Wurtzite structure

Some compound semiconductors, including commonly used gallium nitride, can crystallize in the wurtzite structure, which has hexagonal symmetry and influences polarization and device behavior.

Point defects

  • Vacancies are missing atoms at lattice sites.

  • Interstitial defects are atoms occupying positions between normal lattice sites.

  • Substitutional defects occur when an atom replaces a host atom.

  • Antisite defects occur in compounds when an atom occupies a lattice site normally associated with a different atomic species.

Extended defects

  • Dislocations are line defects that influence mechanical and electronic properties.

  • Grain boundaries separate crystalline regions with different orientations.

  • Stacking faults disrupt the regular sequence of atomic planes.

  • Interfaces between different materials can contain structural and electronic discontinuities.

Electronic effects of defects

Defects can create energy levels within the band gap, trap charge carriers, promote recombination, change conductivity, and influence optical emission. Some defects are deliberately introduced to achieve a desired function, while others degrade device performance.

Crystalline and amorphous materials

Crystalline semiconductors possess long-range periodic order, whereas amorphous semiconductors lack long-range translational order. Amorphous silicon, for example, is useful in certain thin-film photovoltaic and electronic applications, although its electronic transport differs substantially from crystalline silicon.

7 electronic material properties

Electrical conductivity

Electrical conductivity describes how readily a material carries electric current. In semiconductors it depends on electron and hole concentrations, their mobilities, temperature, and defect or impurity populations.

Resistivity

Resistivity is the intrinsic electrical opposition of a material to current flow. It is the reciprocal of conductivity for an isotropic material in the ordinary linear-response regime.

Carrier concentration

Carrier concentration is the number of mobile electrons or holes per unit volume. It is commonly expressed in inverse cubic metres in SI, although inverse cubic centimetres is frequently used in semiconductor engineering.

Mobility

Mobility quantifies the response of carriers to an applied electric field and is commonly expressed in square metres per volt-second in SI.

Dielectric properties

Dielectric materials respond to electric fields through polarization. Their permittivity and dielectric loss are important in capacitors, gate insulators, microwave systems, and integrated circuits.

Optical properties

Optical properties include absorption, transmission, reflection, refractive index, photoluminescence, and electroluminescence. These properties are closely related to electronic transitions, band structure, defects, and material composition.

Thermal properties

Thermal conductivity, heat capacity, thermal expansion, and thermal stability influence heat removal, device reliability, and performance under operating conditions.

Magnetic properties

Magnetic electronic materials can exhibit diamagnetic, paramagnetic, ferromagnetic, antiferromagnetic, or other magnetic behavior. They are used in memory, sensing, spintronics, and magnetic components.

Reliability properties

Electronic materials must retain suitable properties under electric fields, temperature cycles, mechanical stress, radiation, moisture, and long-term operation.

8 semiconductor devices and their material requirements

Pn junction diode

A p-n junction forms when p-type and n-type semiconductor regions meet. Carrier diffusion across the junction creates a depletion region and an internal electric field. Under forward bias, the junction generally permits substantial current flow; under reverse bias, current is normally much smaller until breakdown conditions are reached.

Transistor

A transistor is a semiconductor device used to control electrical current or voltage. Bipolar junction transistors rely on electron and hole transport across multiple semiconductor regions, while field-effect transistors use an electric field to control the conductivity of a channel.

Integrated circuit

An integrated circuit combines many electronic components, including transistors, resistors, capacitors, and interconnections, within a compact semiconductor-based structure. Its performance depends on semiconductor quality, dielectric materials, conductive interconnects, interfaces, lithographic precision, and thermal management.

Light emitting diode

An LED converts electrical energy into light through radiative electron-hole recombination. Its emission wavelength depends strongly on the semiconductor band gap and device structure.

Photodetector

A photodetector converts incident optical radiation into an electrical signal. Absorbed photons generate charge carriers, which are separated or collected to produce measurable current or voltage.

Solar cell

A semiconductor solar cell converts absorbed sunlight into electrical energy. Photons generate electron-hole pairs, and an internal electric field or selective carrier-transport structure helps separate and collect them.

Memory devices

Semiconductor memory devices store information through charge states, transistor states, resistance states, or other engineered physical conditions. Their performance depends on material stability, switching behavior, retention, endurance, and manufacturability.

Power semiconductor devices

Power semiconductor devices control electrical energy at high voltage and current. Silicon, silicon carbide, and gallium nitride are important materials, with the best choice depending on voltage, switching frequency, efficiency, cost, and thermal requirements.

9 fabrication and processing

Overview

Semiconductor fabrication transforms carefully selected materials into precisely controlled device structures. The process must manage composition, thickness, crystal quality, doping profiles, interfaces, contamination, and dimensional accuracy.

Crystal growth

Single-crystal semiconductor materials can be produced using controlled crystal-growth techniques. For silicon, methods such as the Czochralski process and float-zone refining are used for different purity and application requirements.

Wafer preparation

A grown semiconductor crystal can be shaped into wafers through slicing, grinding, polishing, and cleaning. Surface quality and contamination control are essential because microscopic damage or particles can affect device yield.

Thin film deposition

Physical vapor deposition

Physical vapor deposition transfers material from a source to a substrate through physical processes such as evaporation or sputtering.

Chemical vapor deposition

Chemical vapor deposition forms a solid film through chemical reactions involving gaseous precursors at or near a substrate surface.

Atomic layer deposition

Atomic layer deposition uses sequential, self-limiting surface reactions to produce highly controlled thin films, particularly useful for conformal coatings and nanoscale device structures.

Epitaxy

Epitaxial growth forms a crystalline layer with a defined crystallographic relationship to an underlying crystalline substrate. It is essential for many compound-semiconductor and advanced silicon devices.

Lithography and patterning

Lithography transfers designed patterns onto a substrate using light, electron beams, or other patterning methods. Subsequent processing transfers these patterns into material layers, creating device features and interconnections.

Etching

Etching selectively removes material to create patterns or expose underlying layers. It may be wet chemical or dry plasma-based, and its selectivity, anisotropy, and damage must be controlled.

Doping processes

Dopants may be introduced through processes such as ion implantation or diffusion. Subsequent thermal processing can repair implantation damage and electrically activate dopants while controlling unwanted diffusion.

Oxidation and dielectric formation

Oxidation and deposition processes create insulating layers and gate dielectrics. Interface quality and dielectric reliability are critical for transistor performance.

Metallization and interconnection

Conductive materials are deposited and patterned to connect device components. Contact resistance, electromigration, adhesion, and thermal compatibility are important design concerns.

Process integration

Individual fabrication steps must be compatible when combined into a complete manufacturing sequence. A process that improves one layer may damage another through thermal exposure, chemical interaction, stress, contamination, or interface degradation.

Quality control

Fabrication quality is monitored using dimensional measurements, film-thickness measurements, defect inspection, electrical testing, and statistical process control.

10 characterization and testing

X ray diffraction

X-ray diffraction identifies crystalline phases, crystal structure, lattice parameters, and certain forms of strain or crystallinity.

Scanning electron microscopy

Scanning electron microscopy examines surface morphology, patterns, defects, and cross-sectional features at high spatial resolution.

Transmission electron microscopy

Transmission electron microscopy can reveal nanoscale crystal structure, interfaces, defects, and local microstructural features through transmitted electrons.

Atomic force microscopy

Atomic force microscopy measures surface topography and can investigate local mechanical, electrical, or other properties using suitable probe modes.

Spectroscopy

  • Raman spectroscopy provides information about vibrational modes, crystalline quality, strain, and material composition.

  • Photoluminescence spectroscopy investigates optical emission and electronic transitions.

  • X-ray photoelectron spectroscopy provides information about surface elemental composition and chemical states.

  • Secondary-ion mass spectrometry can measure depth-dependent elemental and dopant distributions.

Electrical characterization

  • Four-point probe measurements estimate sheet resistance or resistivity while reducing the influence of contact resistance.

  • Hall-effect measurements can provide carrier type, carrier concentration, and mobility under suitable assumptions.

  • Current-voltage measurements reveal device conduction, rectification, leakage, and breakdown behavior.

  • Capacitance-voltage measurements help characterize junctions, dielectric layers, and semiconductor interfaces.

Optical and thermal testing

Optical absorption, transmission, emission, thermal conductivity, and temperature-dependent electrical measurements help evaluate materials for photonic, photovoltaic, and high-temperature applications.

Testing quality

A reliable characterization result requires calibrated instruments, appropriate sample preparation, controlled measurement conditions, uncertainty estimation, and a clear understanding of what the measurement actually represents.

11 applications

Computing and communication

Silicon integrated circuits, compound-semiconductor amplifiers, photonic devices, and high-frequency components enable computing, data transmission, and telecommunications.

Renewable energy

Semiconductor solar cells convert sunlight into electricity, while power semiconductors improve the efficiency of inverters, chargers, and electrical energy-conversion systems.

Transportation

Power semiconductor devices control electric motors, battery charging, vehicle power systems, and energy conversion in electric and hybrid vehicles.

Healthcare

Semiconductor sensors and imaging components support medical monitoring, diagnostic equipment, optical detection, and portable healthcare electronics.

Industrial automation

Semiconductor sensors, controllers, power electronics, and communication components support robotics, process monitoring, and automated manufacturing.

Lighting and display

LEDs, laser diodes, photodetectors, and display-related semiconductor structures convert or control light for illumination, imaging, and visual communication.

Environmental monitoring

Electronic and optical semiconductor sensors can detect gases, chemical species, temperature, radiation, and environmental changes.

12 design and material selection

Selection criteria

  • Required band gap and operating wavelength

  • Electron and hole mobility

  • Breakdown electric field and operating voltage

  • Thermal conductivity and maximum operating temperature

  • Defect density and crystal quality

  • Chemical and environmental stability

  • Compatibility with substrates, contacts, and dielectric layers

  • Manufacturing maturity and production yield

  • Cost, supply-chain availability, and environmental impact

Comparison example

Silicon

A mature and cost-effective choice for many integrated circuits and moderate-voltage power devices, supported by an extensive manufacturing ecosystem.

Silicon carbide

Often attractive for high-voltage and high-temperature power applications where its wide band gap and high breakdown field provide system-level advantages.

Gallium nitride

Useful for high-frequency and high-efficiency power conversion, particularly where switching performance and compact device design are important.

Gallium arsenide

Useful for selected high-speed and optoelectronic applications because of its electronic and optical properties.

Selection conclusion

No semiconductor is universally best. The correct choice depends on the device function, operating conditions, manufacturing process, reliability requirements, and total system cost.

13 common misconceptions and limitations

Misconceptions

MisconceptionCorrection

All semiconductors have the same electrical properties.

Different semiconductor compositions, crystal structures, band gaps, defects, and processing histories produce substantially different electrical and optical behavior.

A semiconductor is simply a material halfway between a conductor and an insulator.

The most important feature is the controllability of its charge carriers and electronic properties, not merely an intermediate conductivity value.

Doping always increases device performance.

Doping can increase carrier concentration but may also increase scattering, leakage, recombination, and other unwanted effects.

Higher carrier mobility always guarantees a better semiconductor device.

Device performance also depends on band gap, carrier concentration, interfaces, breakdown behavior, geometry, thermal management, and reliability.

Silicon is suitable for every electronic application.

Silicon is highly versatile, but compound and wide-band-gap semiconductors can be better for certain optical, high-frequency, high-voltage, or high-temperature applications.

Engineering limitations

  • Defects and contamination can reduce device yield and reliability.

  • Heat generation can degrade performance and shorten operating life.

  • Very small device dimensions introduce quantum, interface, and leakage effects that challenge conventional scaling.

  • Advanced fabrication requires expensive equipment and extremely precise process control.

  • Some compound semiconductors involve scarce, toxic, or environmentally problematic elements.

  • Reliability can be affected by electromigration, dielectric breakdown, thermal cycling, radiation, and interface degradation.

14 emerging research directions

Wide band gap electronics

Research on silicon carbide, gallium nitride, and other wide-band-gap materials aims to improve high-voltage, high-temperature, and high-frequency electronic systems.

Two dimensional electronics

Atomically thin materials are being investigated for compact transistors, flexible devices, sensors, and new quantum electronic structures.

Quantum materials

Materials with strongly correlated electrons, unusual topological states, or other quantum phenomena may enable new electronic, sensing, and information-processing functions.

Spintronics

Spintronics uses electron spin, in addition to or instead of charge alone, to store and process information. It requires materials with suitable magnetic and spin-transport properties.

Neuromorphic materials

Materials with controllable resistive switching or other memory-like responses are being explored for hardware inspired by neural information processing.

Perovskite and tandem photovoltaics

Research aims to improve solar-cell efficiency through new absorber compositions and tandem architectures while addressing stability, toxicity, and scalable manufacturing.

Materials informatics

Computational modelling, databases, machine learning, and automated experiments are increasingly used to identify promising semiconductor compositions and optimize processing conditions.

15 learning and investigation workflow

Learning sequence

  • Understand atomic bonding and the formation of electronic energy bands.

  • Compare conductors, semiconductors, and insulators using band structures.

  • Study intrinsic carrier generation and the roles of electrons and holes.

  • Explain how donor and acceptor doping produce n-type and p-type materials.

  • Investigate how a p-n junction creates a depletion region and rectifying behavior.

  • Compare silicon with compound and wide-band-gap semiconductors.

  • Connect semiconductor processing methods to crystal quality, interfaces, and device performance.

  • Interpret basic electrical and optical characterization results.

Practical investigation

Activity

Compare the behavior of a light-sensitive semiconductor component under different illumination conditions using a safe, low-voltage educational circuit.

Objective

Understand how light-generated charge carriers can change the electrical response of a semiconductor device.

Method

  • Identify a suitable educational photodiode or light-sensitive semiconductor sensor and obtain its datasheet.

  • Record the specified operating limits and connect it to a compatible low-voltage measurement circuit.

  • Measure the output under a controlled dark condition.

  • Repeat the measurement under several safe and consistent illumination levels.

  • Keep the circuit configuration and measurement method unchanged between observations.

  • Record the results in a table and plot the measured response against illumination level.

  • Compare the observed trend with the device datasheet and identify possible sources of measurement variation.

Expected observation

The measured electrical response generally changes with incident light intensity, although the exact relationship depends on device type, bias, wavelength, circuit design, and operating conditions.

Verification

Check that the results are repeatable, remain within the component's specified operating limits, and show a physically reasonable relationship between illumination and electrical response.

Safety

Use only appropriately rated low-voltage educational equipment, avoid exposed mains connections, and follow the component manufacturer's operating instructions.

Knowledge check

  • What distinguishes a semiconductor from an ordinary conductor and an insulator?

  • What are the valence band, conduction band, and band gap?

  • Why can an intrinsic semiconductor conduct electricity even without intentional doping?

  • How does donor doping produce n-type behavior?

  • Why are holes treated as positive charge carriers?

  • What is the difference between direct and indirect band gaps?

  • Why is silicon widely used in integrated-circuit manufacturing?

  • Why can gallium nitride and silicon carbide outperform silicon in selected power-electronic applications?

  • How can defects reduce the efficiency of a semiconductor device?

  • Why must semiconductor material selection consider processing compatibility and long-term reliability?

Variables

Sigma

Electrical conductivity, measured in siemens per metre (S/m).

Q

Magnitude of the elementary charge, approximately 1.602176634 × 10^-19 coulombs (C).

N

Electron concentration, measured in inverse cubic metres (m^-3).

P

Hole concentration, measured in inverse cubic metres (m^-3).

Mu n

Electron mobility, measured in square metres per volt-second (m^2/(V·s)).

Mu p

Hole mobility, measured in square metres per volt-second (m^2/(V·s)).

Rho

Electrical resistivity, measured in ohm-metres (Ω·m).

V d

Magnitude of average carrier drift velocity, measured in metres per second (m/s).

E

Electric-field magnitude, measured in volts per metre (V/m).

N i

Intrinsic carrier concentration, measured in inverse cubic metres (m^-3).

J n drift

Magnitude of electron drift-current density, measured in amperes per square metre (A/m^2).

Example or application

Title

Understanding how silicon doping changes electrical behavior

Scenario

Consider a silicon crystal used as the foundation of an electronic device. Pure silicon has relatively few mobile charge carriers at room temperature compared with a heavily doped semiconductor. Introducing controlled donor or acceptor impurities changes the carrier population.

Steps

StepActionExplanation

1

Start with an intrinsic silicon crystal.

Silicon atoms form a diamond-cubic crystal structure and share valence electrons through covalent bonding. At thermal equilibrium, some electrons gain sufficient energy to enter the conduction band, leaving holes in the valence band.

2

Consider donor doping with phosphorus.

Phosphorus has five valence electrons. When it occupies a silicon lattice site, four electrons participate in bonding and the remaining donor electron can become available for conduction after excitation.

3

Identify the carrier populations.

The electron concentration becomes substantially greater than the hole concentration under ordinary n-type conditions. Electrons are majority carriers and holes are minority carriers.

4

Consider acceptor doping with boron.

Boron has three valence electrons. Its substitutional incorporation creates acceptor states that can accept electrons from the valence-band system, leaving mobile holes.

5

Compare the electrical behavior.

The n-type and p-type materials have different majority carriers and can be joined to form a p-n junction. This junction provides the basis for important semiconductor functions such as rectification and carrier separation.

Conclusion

Doping does not simply add more conducting material. It changes the electronic population of the semiconductor by introducing controlled donor or acceptor states. This ability to control carrier concentrations is one of the central reasons semiconductors are useful in electronic engineering.

Definition

Semiconductors and electronic materials are materials whose electronic, electrical, optical, magnetic, thermal, or related properties are used or engineered to control charge transport, energy conversion, signal processing, sensing, and information storage. A semiconductor is specifically a material with an electronic structure that permits its mobile charge-carrier population and electrical conductivity to be controlled through factors such as temperature, illumination, doping, and applied electric fields.

Purpose

  • Explain how electronic structure and charge-carrier behavior determine semiconductor properties.

  • Provide the scientific foundation for understanding diodes, transistors, integrated circuits, sensors, LEDs, and solar cells.

  • Support the selection and development of materials for electronic, photonic, and power-conversion applications.

  • Connect semiconductor composition, processing, defects, and interfaces with device performance and reliability.

  • Introduce the material principles behind modern computing, communication, automation, and renewable-energy technologies.

Importance

  • Semiconductor materials form the physical foundation of modern computing and digital communication.

  • Their controllable conductivity enables electronic switching, amplification, and signal processing.

  • Optoelectronic semiconductors support light generation, detection, and optical communication.

  • Power semiconductors improve the control and conversion of electrical energy in transportation, industry, and renewable-energy systems.

  • Semiconductor material engineering is central to the development of smaller, faster, more efficient, and more reliable electronic devices.

  • Understanding electronic materials helps engineers address manufacturing limitations, energy consumption, reliability, and environmental impacts.

Related Topics

  • Introduction to Materials Science

  • Structure–Processing–Properties–Performance Relationships

  • Metals and Metallic Materials

  • Functional and Smart Materials

  • Electrical Conductivity

  • Crystal Structures and Lattices

  • Electronic Band Structure

  • Nanomaterials

  • Materials Characterization

  • Solar Cell Materials

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • S. M. Sze and Kwok K. Ng, Physics of Semiconductor Devices, 3rd Edition.
  • Donald A. Neamen, Semiconductor Physics and Devices: Basic Principles, 4th Edition.
  • Ben G. Streetman and Sanjay Banerjee, Solid State Electronic Devices, 7th Edition.
  • Charles Kittel, Introduction to Solid State Physics, 8th Edition.
  • National Institute of Standards and Technology (NIST), materials science and semiconductor-related measurement resources.

Suggest a correction or source · More in Materials Science