✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-ENG-006-014

Natural and Biological Materials

Natural and biological materials are materials produced by geological, biological, or other natural processes. They include wood, bone, shell, silk, collagen, cellulose, natural fibers, minerals, rocks, and biological composites. Their structures often exhibit hierarchical organization, anisotropy, porosity, self-assembly, and multifunctionality. Studying these materials helps explain how natural systems achieve useful combinations of strength, toughness, flexibility, lightweight construction, and environmental adaptability, while providing inspiration for bioinspired engineering and sustainable material development.

Density

Expression

\rho = \frac{m}{V}

Explanation

Density is the mass of a material divided by its volume. It is useful when comparing lightweight natural materials such as wood, cork, and natural-fiber structures.

Conditions

For porous natural materials, the measured density depends on whether pore volume is included and whether the material is measured in a dry or moisture-containing state.

Porosity

Expression

\phi = \frac{V_p}{V_t}\times 100\%

Explanation

Porosity is the percentage of total material volume occupied by pores or voids.

Conditions

The result depends on the measurement method and whether open, closed, and inaccessible pores are included.

Engineering stress

Expression

\sigma = \frac{F}{A_0}

Explanation

Engineering stress is applied force divided by the original cross-sectional area. It is useful for comparing tensile or compressive behavior under defined test conditions.

Engineering strain

Expression

\varepsilon = \frac{\Delta L}{L_0}

Explanation

Engineering strain is the fractional change in length relative to the original length. It is useful for describing deformation in fibers, wood specimens, and other natural materials.

Moisture content dry basis

Expression

MC = \frac{m_w-m_d}{m_d}\times 100\%

Explanation

Dry-basis moisture content expresses the mass of water in a specimen relative to its dry mass. It is widely used in wood and biomass characterization.

Conditions

The dry mass must be established using an appropriate validated drying method. The equation describes moisture content on a dry-mass basis, not a wet-mass basis.

Rule of mixtures

Expression

E_c \approx V_f E_f + V_m E_m

Explanation

A simple longitudinal rule-of-mixtures approximation estimates the elastic modulus of a continuous-fiber composite when fibers and matrix experience approximately equal axial strain.

Conditions

This is an idealized model. Natural-fiber composites may have discontinuous fibers, imperfect interfaces, variable fiber orientation, porosity, and moisture sensitivity, so actual properties may differ substantially.

Explanation

1 fundamental concepts

Natural materials

Natural materials are substances obtained from or formed by natural processes rather than created entirely through synthetic industrial manufacturing. They may originate from plants, animals, microorganisms, geological processes, or naturally occurring minerals.

Biological materials

Biological materials are materials produced by living organisms or forming part of their structures. Examples include cellulose in plants, collagen in connective tissues, chitin in arthropod exoskeletons, and mineralized bone.

Natural vs biological materials

All biological materials are natural in origin, but not all natural materials are biological. Granite, clay minerals, and naturally occurring metals are natural materials but are not produced by biological systems.

Bioinspired materials

Bioinspired materials are engineered materials whose structures, mechanisms, or functions are based on observations of biological systems. They may imitate selected natural principles without reproducing the complete biological material.

Hierarchical organization

Many natural materials are organized across multiple length scales, from molecules and nanostructures to fibers, cells, tissues, and whole components. Their performance often emerges from the interaction of these structural levels rather than from one constituent alone.

Structure function relationship

The arrangement, orientation, composition, and interfaces of natural materials determine how they carry loads, resist fracture, control transport, interact with water, and respond to environmental changes.

2 major classes and sources

Plant based materials

Examples

  • Wood

  • Bamboo

  • Cotton

  • Flax

  • Hemp

  • Jute

  • Cork

  • Natural rubber

  • Plant-derived cellulose

Characteristics

Plant-based materials commonly contain cellulose, hemicellulose, lignin, natural oils, proteins, and other organic compounds. Their properties depend on plant species, growth conditions, moisture, anatomy, and processing.

Applications

  • Construction and furniture

  • Textiles and ropes

  • Paper and packaging

  • Natural-fiber composites

  • Insulation and lightweight panels

  • Biobased polymers and chemical feedstocks

Animal based materials

Examples

  • Silk

  • Wool

  • Leather

  • Collagen

  • Keratin

  • Chitin

  • Shell materials

  • Bone and dentin

Characteristics

Animal-derived materials contain structural proteins, polysaccharides, minerals, or combinations of these components. Their performance is often associated with fiber organization, molecular structure, mineralization, and interfaces.

Applications

  • Textiles and protective products

  • Biomedical research materials

  • Traditional construction and decorative materials

  • Biologically derived coatings and scaffolds

  • Bioinspired composite development

Microbial materials

Examples

  • Bacterial cellulose

  • Microbial biopolymers

  • Fungal mycelium composites

  • Microbially produced biogenic minerals

  • Selected extracellular polymeric substances

Characteristics

Microorganisms can produce fibers, polymers, mineral structures, and interconnected networks. Their growth and production conditions can influence material composition, porosity, and mechanical properties.

Applications

  • Biodegradable packaging research

  • Acoustic and thermal insulation

  • Biomedical material research

  • Biomanufacturing

  • Environmental and construction applications

Geological and mineral materials

Examples

  • Granite

  • Basalt

  • Limestone

  • Clay minerals

  • Quartz

  • Natural graphite

  • Natural mineral aggregates

Characteristics

Geological materials form through processes such as crystallization, sedimentation, metamorphism, weathering, and mineral precipitation. Their properties depend on mineral composition, grain structure, porosity, fractures, and geological history.

Applications

  • Construction and infrastructure

  • Ceramics and cement production

  • Natural stone products

  • Industrial mineral processing

  • Geotechnical engineering

3 wood and plant structures

Wood as a hierarchical composite

Wood is a natural cellular composite primarily composed of cellulose, hemicellulose, and lignin. Cellulose microfibrils provide tensile reinforcement, hemicellulose contributes to the matrix, and lignin provides rigidity and helps bind the cellular structure.

Cellulose

Cellulose is a linear polysaccharide composed of glucose units connected through beta-1,4-glycosidic bonds. Its chains form hydrogen-bonded structures that contribute to the strength and stiffness of plant cell walls.

Hemicellulose

Hemicellulose is a group of branched polysaccharides associated with cellulose and lignin in plant cell walls. Its composition and structure vary among plant species and influence cell-wall organization and moisture response.

Lignin

Lignin is a complex aromatic polymer that contributes to rigidity, water resistance, and structural support in many plant tissues.

Wood anatomy

Cellular structure

Wood contains elongated cells and vessels or tracheids that contribute to mechanical support and fluid transport. The exact anatomy depends on whether the wood comes from hardwood or softwood species.

Growth rings

Annual growth rings in many trees reflect changes in wood formation during different seasons. They can reveal aspects of growth history and influence local density and mechanical properties.

Grain direction

The orientation of wood fibers and cells produces strong directional differences in stiffness, strength, shrinkage, and transport behavior.

Anisotropy

Wood is strongly anisotropic. Its mechanical properties differ along the longitudinal, radial, and tangential directions. Engineering design must therefore consider loading direction and moisture-related dimensional changes.

Moisture response

Wood absorbs and releases water through its cell-wall structure. Changes in moisture content can cause swelling, shrinkage, dimensional instability, and changes in mechanical properties.

Natural defects

Knots, cracks, grain deviations, biological damage, and irregular growth can reduce strength or create local stress concentrations.

Applications and selection

Wood selection depends on density, stiffness, strength, durability, moisture exposure, biological resistance, fire performance, availability, and intended structural role.

4 natural fibers and textile materials

Cellulose based fibers

Examples

  • Cotton

  • Flax

  • Hemp

  • Jute

  • Ramie

Structure

Cellulose-based fibers contain oriented polymer chains and microfibrillar structures. Their strength and flexibility depend on molecular organization, fiber geometry, moisture, and defects.

Properties

These fibers are generally hydrophilic, biodegradable under suitable conditions, and capable of providing useful tensile reinforcement, although properties vary considerably among fiber types.

Protein based fibers

Silk

Silk is a protein-based fiber whose mechanical performance is associated with organized protein structures, including crystalline beta-sheet regions and less ordered regions. It combines useful strength and flexibility.

Wool

Wool is primarily composed of keratin, a structural protein with a complex hierarchical structure. Its surface and fiber architecture contribute to elasticity, moisture interactions, and thermal insulation.

Hair and other keratin fibers

Keratin-based materials contain protein structures stabilized by interactions including disulfide bonds. Their mechanical and chemical behavior depends on fiber organization and treatment.

Fiber characteristics

  • Fiber length and diameter

  • Tensile strength and elongation

  • Moisture absorption

  • Surface chemistry and adhesion

  • Thermal stability

  • Biological durability

  • Defect distribution and variability

Natural fiber composites

Natural fibers can reinforce polymer matrices in composite materials. Their low density and renewable origin are attractive, but moisture absorption, interface compatibility, thermal stability, and property variability require careful management.

5 bone shell and biological composites

Bone

Composition

Bone is a hierarchical biological composite consisting primarily of a collagen-rich organic matrix reinforced with mineral phases dominated by calcium phosphate, especially carbonated hydroxyapatite-like mineral.

Organic component

Type I collagen provides a flexible protein framework that contributes to tensile behavior and crack resistance.

Mineral component

The mineral phase provides stiffness and compressive strength. Its distribution within the collagen matrix contributes to the mechanical performance of bone.

Hierarchical structure

  • Molecular collagen structures

  • Mineralized collagen fibrils

  • Larger fibril assemblies

  • Lamellar structures

  • Osteons and trabecular architectures

  • Whole-bone geometry

Cortical bone

Cortical bone is the dense outer form of bone. Its organized structure provides substantial stiffness and strength for load-bearing.

Trabecular bone

Trabecular bone is a porous, interconnected network of bony struts and plates. It provides structural support with lower mass and is adapted to local loading conditions.

Mechanical adaptation

Bone remodels in response to biological signals and mechanical loading. Its structure and density can change over time as bone-forming and bone-resorbing cells regulate tissue turnover.

Engineering significance

Bone demonstrates how a composite can combine a stiff mineral phase with a tougher organic matrix and hierarchical architecture to achieve useful combinations of stiffness, strength, and fracture resistance.

Nacre

Definition

Nacre, also called mother-of-pearl, is a layered biological material found in the inner surfaces of certain mollusk shells.

Structure

Nacre contains mineral platelets, commonly aragonite, arranged in layered structures separated by thin organic interlayers.

Toughening mechanisms

  • Crack deflection through the layered architecture

  • Sliding and friction between mineral platelets

  • Organic interlayer deformation

  • Energy dissipation through controlled structural movement

  • Crack bridging and other hierarchical toughening mechanisms

Engineering significance

Nacre demonstrates how interfaces and architecture can improve toughness in a material system containing a brittle mineral phase.

Shell and exoskeleton materials

Shells, teeth, and arthropod exoskeletons use combinations of mineral phases, proteins, polysaccharides, and hierarchical structures. Their properties depend on biological growth processes and local structural organization.

6 natural rubber and biopolymers

Natural rubber

Natural rubber is a polymeric material derived primarily from the latex of certain plants. Its main polymer component is cis-1,4-polyisoprene, which provides high elasticity under suitable conditions.

Elasticity mechanism

Rubber elasticity is largely associated with the conformational freedom of long polymer chains. Stretching aligns chains and reduces their conformational entropy; when the load is removed, the network tends to return toward its more probable coiled configuration.

Vulcanization

Vulcanization introduces crosslinks between polymer chains, commonly through sulfur-based chemistry in conventional rubber processing. Crosslinking improves elastic recovery, strength, and resistance to permanent deformation, although the exact effects depend on formulation.

Other natural biopolymers

  • Cellulose

  • Starch

  • Chitin

  • Chitosan

  • Alginate

  • Natural proteins

Applications

  • Elastomeric products

  • Seals and flexible components

  • Biodegradable packaging research

  • Biomedical material development

  • Paper and textile products

  • Bio-based chemical and polymer production

Limitations

  • Natural feedstock composition can vary.

  • Moisture and temperature can influence performance.

  • Biological degradation may limit service life in some environments.

  • Processing and chemical modification can affect biodegradability and environmental performance.

7 geological materials and natural minerals

Mineral

A mineral is a naturally occurring inorganic solid with a characteristic chemical composition or composition range and an ordered atomic structure, subject to recognized mineralogical definitions.

Rock

A rock is a naturally occurring aggregate of one or more minerals or mineraloid materials. Its properties depend on constituent minerals, grain sizes, textures, porosity, and geological history.

Igneous rocks

Igneous rocks form through the cooling and solidification of magma or lava. Cooling conditions influence crystal size and texture.

Sedimentary rocks

Sedimentary rocks form through deposition, compaction, cementation, or chemical and biological precipitation. They commonly contain layered structures and may exhibit variable porosity.

Metamorphic rocks

Metamorphic rocks form when existing rocks undergo changes in mineral composition, texture, or structure under elevated temperature, pressure, or chemically active fluids without complete melting.

Clay minerals

Clay minerals are fine-grained hydrous aluminosilicates and related minerals that influence soil behavior, ceramic processing, adsorption, and geological engineering.

Mineral structure and properties

Mineral hardness, cleavage, density, thermal stability, electrical behavior, and chemical reactivity depend on crystal structure, bonding, composition, and defects.

Engineering applications

Natural geological materials are used in construction, aggregates, ceramics, glass, cement, refractories, filtration, and industrial mineral processing. Their suitability requires testing for composition, strength, durability, and environmental compatibility.

8 hierarchical structure and natural design principles

Hierarchy

A hierarchical material contains structural features arranged across multiple length scales. Molecular structures influence nanoscale assemblies; these form fibers, layers, cells, or other microstructures; larger architectures determine component-scale behavior.

Anisotropy

Anisotropy means that a material's properties depend on direction. It commonly occurs in wood, bone, natural fibers, and layered biological composites because their internal structures are directionally organized.

Porosity

Porosity is the fraction of a material's volume occupied by pores or voids. Natural porous structures can reduce weight, enable fluid transport, and influence stiffness, strength, and energy absorption.

Gradient structure

Some natural materials exhibit gradual changes in composition, density, stiffness, or porosity across their dimensions. Such gradients can reduce abrupt property changes and improve adaptation to different loading or environmental conditions.

Interface engineering

Interfaces between fibers, mineral particles, protein matrices, and other structural elements influence load transfer, crack propagation, and energy dissipation.

Self assembly

Self-assembly is the spontaneous organization of components into ordered structures through interactions such as hydrogen bonding, electrostatic attraction, hydrophobic interactions, and molecular recognition.

Damage tolerance

Some natural materials tolerate damage through mechanisms such as crack deflection, fiber bridging, sacrificial bonds, and distributed deformation. These mechanisms can inspire engineering designs that avoid catastrophic failure.

9 environmental response and durability

Moisture

Moisture can cause swelling, plasticization, chemical changes, and biological degradation. The effect depends on material chemistry, porosity, and exposure conditions.

Temperature

Temperature affects molecular mobility, chemical reaction rates, dimensional stability, and mechanical properties. Natural polymers may soften, degrade, or change crystallinity under unsuitable thermal conditions.

Ultraviolet radiation

Ultraviolet radiation can cause photochemical degradation in polymers, fibers, coatings, and other natural materials, leading to changes in color, molecular structure, and mechanical performance.

Biological degradation

Microorganisms, enzymes, and other biological processes can break down susceptible natural materials. Degradation depends on environmental conditions, material composition, and accessibility to biological agents.

Weathering

Weathering combines physical, chemical, and biological effects such as wetting and drying, temperature changes, radiation, oxidation, and microbial action.

Durability assessment

Natural materials must be evaluated under realistic service conditions. Short-term mechanical tests alone may not predict long-term performance when moisture, biological activity, ultraviolet exposure, and cyclic loading are important.

10 characterization and testing

Composition analysis

  • Fourier-transform infrared spectroscopy identifies characteristic molecular vibrations and functional groups.

  • Raman spectroscopy provides information about molecular structure, crystallinity, and selected mineral phases.

  • X-ray diffraction identifies crystalline phases and structural order.

  • Thermogravimetric analysis measures mass changes during controlled heating and can help assess composition and thermal stability.

  • Elemental analysis determines the elemental composition of suitable samples.

Structural analysis

  • Optical microscopy examines tissue, fiber, grain, and pore structures at suitable scales.

  • Scanning electron microscopy reveals surface morphology and fracture features.

  • Transmission electron microscopy can investigate nanoscale structures and interfaces.

  • Micro-computed tomography can provide three-dimensional information about internal pores and architectures without conventional sectioning.

  • Atomic force microscopy can examine surface topography and local mechanical behavior.

Mechanical testing

  • Tensile testing evaluates strength, stiffness, and deformation behavior.

  • Compression testing is important for materials such as bone, foam-like structures, and certain geological materials.

  • Bending tests can characterize wood, fibers, and other slender specimens.

  • Fracture testing investigates resistance to crack initiation or propagation.

  • Dynamic mechanical analysis measures time- and temperature-dependent mechanical response.

Environmental testing

  • Moisture absorption and dimensional-change tests

  • Thermal cycling and aging tests

  • Ultraviolet weathering tests

  • Biological degradation and biodegradation tests

  • Chemical resistance and leaching evaluations

Sampling and variability

Natural materials commonly exhibit biological or geological variability. Representative sampling, multiple specimens, moisture control, orientation control, and statistical analysis are essential for reliable characterization.

11 bioinspired materials engineering

Overview

Bioinspired engineering translates useful principles observed in natural materials into engineered structures and processes. The objective is not necessarily to copy nature exactly but to understand and reproduce a useful mechanism.

Examples

Natural modelEngineering principleEngineering application

Nacre

Layered mineral-organic architecture can improve damage tolerance.

Layered ceramic composites and toughened structural materials.

Bone

A hierarchical mineralized fiber composite can combine stiffness and toughness.

Hierarchical composites and porous implant structures.

Wood

Directional cellular structures provide lightweight stiffness and efficient material use.

Lightweight panels and architected cellular materials.

Lotus leaf

Surface texture and chemistry can create water-repellent behavior.

Superhydrophobic coatings and water-management surfaces.

Gecko foot

Hierarchical surface structures can generate reversible adhesion through intermolecular interactions.

Dry adhesive surfaces and climbing-robot research.

Shark skin

Surface microstructures can influence fluid flow and surface interactions.

Drag-control surfaces and antifouling research.

Translation challenges

  • Natural structures may be difficult to reproduce at industrial scale.

  • Biological materials may depend on growth processes that are not easily replicated.

  • A successful natural mechanism may behave differently in another material system.

  • Manufacturing cost, durability, and environmental impact must be evaluated.

  • Bioinspired designs require testing rather than assuming that copying a natural shape guarantees the same function.

12 sustainability and resource considerations

Renewable feedstocks

Plant- and microorganism-derived materials can be renewable when sourced and produced within responsible ecological limits.

Biodegradability

Some natural materials can be degraded by biological processes, but biodegradability depends on composition, environmental conditions, and processing. A naturally derived material is not automatically biodegradable in every environment.

Life cycle assessment

A lifecycle assessment evaluates environmental impacts across raw-material acquisition, processing, transportation, use, and end-of-life management.

Land and water use

Agricultural feedstocks can compete with food production, land conservation, and water resources. Sustainable sourcing requires evaluating these broader impacts.

Chemical processing

Chemical extraction, bleaching, surface treatment, and composite production can introduce environmental burdens that must be considered alongside renewable origin.

Circular material use

Natural materials can support reuse, repair, recycling, composting, or biodegradation where technically and environmentally appropriate. These end-of-life options must match the actual material composition and local infrastructure.

13 limitations and common misconceptions

Misconceptions

MisconceptionCorrection

All natural materials are environmentally harmless.

Environmental impact depends on sourcing, processing, transportation, durability, chemical treatment, and disposal.

Natural materials always have uniform properties.

Biological and geological growth processes create variability in composition, structure, moisture content, and defects.

Biodegradable materials always degrade quickly.

Degradation rates depend on chemistry, temperature, moisture, microorganisms, geometry, and environmental conditions.

A natural material is automatically suitable for medical use.

Medical applications require controlled composition, processing, sterilization, biological evaluation, and regulatory assessment.

Copying a natural structure guarantees superior engineering performance.

The function of a natural structure depends on its material chemistry, interfaces, scale, and environment. A copied geometry may not reproduce the original mechanism.

Engineering limitations

  • Natural variability makes standardization difficult.

  • Moisture and biological exposure can reduce durability.

  • Some natural fibers have limited thermal stability.

  • Interfaces in natural-fiber composites may have poor adhesion without suitable treatment.

  • Sourcing can create ecological and social impacts.

  • Reproducing complex hierarchical structures at industrial scale remains challenging.

14 emerging research directions

Advanced bioinspired composites

Research uses hierarchical architectures and engineered interfaces inspired by bone, nacre, wood, and other natural structures to improve strength, toughness, and damage tolerance.

Microbial biomanufacturing

Microorganisms are being studied as production systems for cellulose, polymers, mineral structures, and composite building blocks.

Mycelium materials

Fungal mycelium networks can bind agricultural residues into lightweight materials for packaging, insulation, and selected construction applications.

Programmable biomineralization

Research investigates controlled biological or biomimetic processes for producing mineral structures with tailored composition and architecture.

Regenerative materials

Biologically derived and bioinspired materials are being developed for tissue repair, drug delivery, and regenerative medicine.

Sustainable natural fiber composites

Research aims to improve fiber treatment, interface bonding, moisture resistance, durability, and end-of-life recovery.

Multiscale modelling

Computational approaches are being developed to connect molecular organization, nanoscale structures, microstructures, and macroscopic properties in natural materials.

Nature inspired manufacturing

Self-assembly, additive manufacturing, and controlled growth methods are being explored to reproduce complex natural architectures.

15 learning and investigation workflow

Learning sequence

  • Distinguish natural, biological, and bioinspired materials.

  • Identify the major chemical constituents of plant, animal, microbial, and geological materials.

  • Explain the hierarchical structure of wood, bone, natural fibers, and nacre.

  • Understand how anisotropy, porosity, interfaces, and moisture influence properties.

  • Compare natural fibers and synthetic reinforcement materials.

  • Investigate how natural structures inspire engineering solutions.

  • Evaluate variability, durability, processing requirements, and sustainability.

  • Connect characterization results with material structure and performance.

Practical investigation

Activity

Compare the directional mechanical behavior and moisture response of small, safely obtained wood specimens.

Objective

Understand how biological structure and environmental conditions influence natural-material properties.

Method

  • Select representative wood specimens with clearly identified grain directions.

  • Record the specimen dimensions, visible defects, and initial mass.

  • Compare the appearance and orientation of longitudinal, radial, and tangential features.

  • Use an appropriate educational mechanical-testing setup or published datasets to compare directional stiffness or strength.

  • Measure moisture content using a suitable instrument or controlled educational procedure.

  • Compare dimensional or mass changes under documented humidity conditions when equipment is available.

  • Record all measurements and identify sources of specimen variability.

  • Relate the observed behavior to cellulose orientation, cellular architecture, and moisture interactions.

Expected result

Wood generally exhibits direction-dependent mechanical and dimensional behavior, with moisture influencing its mass, dimensions, and mechanical response.

Verification

Check that measurements are associated with specimen orientation and environmental conditions, and that multiple specimens are used to distinguish general trends from individual defects.

Safety

Use commercially available or responsibly sourced specimens. Avoid uncontrolled cutting, splinter exposure, or power-tool operations in an educational demonstration.

Knowledge check

  • What is the difference between natural, biological, and bioinspired materials?

  • Why is wood considered a hierarchical composite?

  • What roles do cellulose, hemicellulose, and lignin play in plant cell walls?

  • Why are wood and many natural fibers anisotropic?

  • How does the collagen-mineral structure of bone contribute to its mechanical behavior?

  • What structural mechanisms make nacre relatively damage tolerant?

  • Why can natural materials vary significantly between specimens?

  • How does moisture influence natural polymers and plant-based materials?

  • Why does renewable origin not automatically guarantee environmental sustainability?

  • How can a biological structure inspire a new engineering material without being copied exactly?

Variables

Rho

Density, measured in kilograms per cubic metre (kg/m^3).

M

Mass, measured in kilograms (kg).

V

Total volume, measured in cubic metres (m^3).

Phi

Porosity, expressed as a percentage or dimensionless fraction.

V p

Pore volume, measured in cubic metres (m^3).

V t

Total specimen volume, including pores, measured in cubic metres (m^3).

Sigma

Engineering stress, measured in pascals (Pa).

F

Applied force, measured in newtons (N).

A 0

Original cross-sectional area, measured in square metres (m^2).

Epsilon

Engineering strain, dimensionless.

Delta L

Change in specimen length, measured in metres (m).

L 0

Original specimen length, measured in metres (m).

MC

Dry-basis moisture content, expressed as a percentage.

M w

Mass of the moisture-containing specimen, measured in kilograms (kg).

M d

Dry mass of the specimen, measured in kilograms (kg).

E c

Estimated longitudinal elastic modulus of the composite, measured in pascals (Pa).

V f

Fiber volume fraction, dimensionless.

E f

Elastic modulus of the reinforcing fiber, measured in pascals (Pa).

V m

Matrix volume fraction, dimensionless.

E m

Elastic modulus of the matrix, measured in pascals (Pa).

Example or application

Title

Understanding why bone behaves as a strong and damage-tolerant natural composite

Scenario

Bone must support mechanical loads while maintaining relatively low mass and adapting to changes in its biological and mechanical environment. Its performance is produced by a hierarchical composite structure rather than by a single uniform substance.

Steps

StepActionExplanation

1

Identify the main constituents.

Bone contains an organic matrix rich in collagen and a mineral phase dominated by calcium-phosphate-based material. The organic and mineral components contribute different aspects of mechanical behavior.

2

Examine the role of collagen.

Collagen provides a flexible structural framework and contributes to tensile behavior and resistance to crack propagation.

3

Examine the role of mineral.

The mineral phase provides stiffness and supports resistance to compressive loading. Its interaction with collagen is essential to the overall response.

4

Connect molecular structure with larger architecture.

Mineralized collagen fibrils are organized into larger structural units, which form lamellar and other tissue architectures. Cortical and trabecular bone use different structural arrangements for their anatomical functions.

5

Explain damage tolerance.

The combination of organic and mineral phases, interfaces, and hierarchical organization can deflect cracks and dissipate energy, reducing the likelihood of sudden brittle failure compared with a simple homogeneous mineral structure.

6

Connect the natural design to engineering.

Engineers can study bone to develop composites that combine stiff reinforcement with a more deformable matrix and carefully designed interfaces.

Conclusion

Bone demonstrates how composition, interfaces, and hierarchical architecture can produce a useful combination of stiffness, strength, and damage tolerance. Its behavior cannot be explained by considering collagen or mineral alone.

Definition

Natural materials are materials obtained from or formed through natural geological, biological, or environmental processes. Biological materials are produced by living organisms or form part of their structures, while bioinspired materials are engineered systems designed using principles observed in natural structures and functions. Their properties arise from composition, hierarchical architecture, interfaces, and interactions with environmental conditions.

Purpose

  • Explain the composition, structure, and properties of naturally occurring and biologically produced materials.

  • Show how hierarchical architectures and interfaces influence mechanical and environmental behavior.

  • Provide scientific foundations for natural-fiber composites and bioinspired engineering.

  • Connect biological and geological processes with material formation and performance.

  • Support the responsible use of natural resources in sustainable materials development.

Importance

  • Natural materials are widely used in construction, textiles, packaging, furniture, biomedical research, and industrial applications.

  • Biological structures demonstrate efficient ways to combine strength, toughness, flexibility, and low weight.

  • Natural-material research provides inspiration for advanced composites, porous structures, and damage-tolerant designs.

  • Understanding natural variability and environmental sensitivity improves material selection and quality control.

  • Renewable biological feedstocks can contribute to sustainable material systems when sourcing and processing are responsibly managed.

  • Bioinspired materials research connects materials science with biology, ecology, chemistry, and engineering.

Related Topics

  • Introduction to Materials Science

  • Classification of Engineering Materials

  • Polymers and Macromolecular Materials

  • Composites and Hybrid Materials

  • Biomaterials and Biomedical Materials

  • Sustainable and Recyclable Materials

  • Structure–Processing–Properties–Performance Relationships

  • Material Selection and Engineering Design

  • Bioinspired Materials

  • Materials Characterization

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • M. A. Meyers, P.-Y. Chen, A. Y. M. Lin, and Y. Seki, Biological Materials: Structure and Mechanical Properties.
  • M. A. Meyers and P.-Y. Chen, Biological Materials Science: Biological Materials, Bioinspired Materials, and Biomaterials.
  • R. M. Rowell, Handbook of Wood Chemistry and Wood Composites.
  • J. F. V. Vincent, Structural Biomaterials.
  • R. M. Wegst and M. F. Ashby, The Mechanical Efficiency of Natural Materials.

Suggest a correction or source · More in Materials Science