✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-029

Atmospheric Pressure and Hydrostatic Equilibrium

Atmospheric pressure is the force per unit area exerted by air; in a stationary atmosphere it decreases with height because it supports the air above.

dp/dz = -ρg

Explanation

Air has mass, and gravity gives that air weight. A horizontal surface within a stationary atmosphere must support the weight of the air above it, so pressure generally decreases with altitude. For a thin horizontal layer, hydrostatic balance states that the vertical pressure gradient balances the local weight density of the gas. In a simple constant-density liquid this gives a linear pressure change, but air is compressible and its density changes with altitude, so atmospheric pressure normally decreases nonlinearly. Pressure at a location is called absolute pressure when measured relative to a perfect vacuum. Gauge pressure is measured relative to local ambient pressure. Atmospheric pressure is commonly measured with a barometer; aircraft use static-pressure sensing systems to determine altitude and airspeed-related quantities. Hydrostatic balance assumes negligible vertical acceleration and is a good approximation for large-scale, slowly varying atmospheric conditions, but it is not exact in strongly accelerating or rapidly evolving flows.

Variables

SymbolMeaning

p

Static pressure, in pascals

z

Vertical coordinate positive upward

ρ

Local air density

g

Local gravitational acceleration

Example or application

If air density were treated as constant over a small height interval of 100 m, the pressure decrease would be approximately ρgΔz; for ρ = 1.2 kg/m³, this is about 1.18 kPa.

Key Points

  • Pressure is force per unit area.

  • Hydrostatic balance relates pressure gradient to air weight.

  • Pressure decreases with altitude in the usual atmosphere.

  • Absolute and gauge pressure use different reference levels.

  • The hydrostatic approximation assumes negligible vertical acceleration.

Applications

  • Altimeter operation and calibration

  • Weather analysis and pressure-altitude calculations

  • Atmospheric and wind-tunnel instrumentation

  • Estimating loads on pressurized aerospace structures

Common Mistakes

  • Confusing absolute pressure with gauge pressure.

  • Assuming atmospheric pressure decreases linearly with altitude over large ranges.

  • Using hydrostatic balance in a strongly accelerating vertical flow without qualification.

Learning Outcomes

  • Define atmospheric static pressure.

  • Interpret the hydrostatic equation and its sign convention.

  • Distinguish absolute and gauge pressure.

Practice Questions

QuestionAnswer

Why does atmospheric pressure generally decrease with altitude?

There is less air above a higher location, so less air weight is supported.

What does the negative sign in dp/dz = -ρg indicate?

Pressure decreases as the upward coordinate increases.

Related Concepts

  • Standard Atmosphere Model

  • Fluid Statics and Pressure Measurement

  • Atmospheric Density and Altitude

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Standard fluid mechanics and atmospheric physics references.

Suggest a correction or source · More in Aerospace Engineering