✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-032

Humidity and Water Vapour Effects

Humidity describes atmospheric water vapour and affects air density, cloud formation, visibility, icing and engine operation.

Relative humidity: RH = (e/e_s) × 100%

Explanation

Humidity is the amount of water vapour in air. It can be expressed in several ways. Relative humidity is the ratio of actual water-vapour partial pressure to saturation vapour pressure at the same temperature, usually expressed as a percentage. Specific humidity is the mass of water vapour divided by the total mass of moist air, while mixing ratio compares water-vapour mass with dry-air mass. Saturation vapour pressure increases strongly with temperature, so relative humidity can change even when the actual water-vapour amount remains constant. When air cools to its dew point, it may become saturated and condensation can form cloud droplets or fog if suitable particles are present. Water vapour has a lower molecular mass than dry air's average molecular mass, so at the same pressure and temperature humid air is slightly less dense than dry air. In aviation, moisture matters for carburetor or engine icing in relevant systems, airframe icing, visibility, cloud avoidance and sensor performance. Relative humidity alone does not specify the total water content unless temperature is also known.

Variables

SymbolMeaning

RH

Relative humidity, percent

e

Actual water-vapour partial pressure

e_s

Saturation vapour pressure at the same temperature

Example or application

If actual vapour pressure is 1.5 kPa and saturation vapour pressure at that temperature is 2.0 kPa, relative humidity is 75%.

Key Points

  • Relative humidity compares actual and saturation vapour pressures.

  • Saturation vapour pressure rises with temperature.

  • Dew point is the temperature at which air becomes saturated when cooled at constant pressure and water content.

  • Humid air is slightly less dense than dry air at equal pressure and temperature.

  • Moisture affects icing, clouds and visibility.

Applications

  • Assessing airframe icing conditions

  • Understanding fog, cloud and visibility

  • Correcting air-density and engine-performance estimates

  • Designing environmental-control and moisture-protection systems

Common Mistakes

  • Treating relative humidity as a direct measure of water-vapour mass.

  • Assuming 100% relative humidity means rain must occur.

  • Ignoring temperature when comparing humidity values.

Learning Outcomes

  • Distinguish relative humidity, specific humidity and mixing ratio.

  • Calculate relative humidity from vapour pressures.

  • Explain aerospace effects of atmospheric moisture.

Practice Questions

QuestionAnswer

What does 100% relative humidity indicate?

The air is saturated with respect to liquid water at its current temperature and pressure.

Why can cooling air increase its relative humidity without adding water vapour?

Saturation vapour pressure decreases as temperature falls.

Related Concepts

  • Composition of the Atmosphere

  • Atmospheric Density and Altitude

  • Real Gas Behaviour and Limitations

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • WMO and aviation meteorology educational references.

Suggest a correction or source · More in Aerospace Engineering