✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-037

Fluid Statics and Pressure Measurement

Fluid statics studies fluids at rest, where pressure acts normal to surfaces and changes with depth according to the fluid's weight.

p = p_0 + ρgh

Explanation

Fluid statics examines fluids with no relative motion. At a point in a static fluid, pressure is the same in every direction and acts normal to a surface. In a fluid of constant density under uniform gravity, pressure increases linearly with depth. Instruments measure pressure using different reference levels: a piezometer indicates pressure head in a suitable liquid system, a manometer compares pressure through liquid-column height differences, and a Bourdon gauge measures pressure mechanically. A barometer measures atmospheric pressure. Absolute pressure is referenced to a vacuum, whereas gauge pressure is referenced to the surrounding atmospheric pressure. Differential pressure is the difference between two pressures. In aircraft, static and total pressure ports support air-data measurements; pitot-static systems use pressure differences to infer airspeed under appropriate compressibility corrections. Measurement errors can arise from blocked ports, incorrect instrument orientation, fluid density assumptions, temperature effects and calibration errors.

Variables

SymbolMeaning

p

Pressure at depth h

p_0

Pressure at the reference free surface

ρ

Fluid density

g

Gravitational acceleration

h

Depth below the reference level

Example or application

In water, a point 2 m below the free surface has a gauge pressure of approximately 1000×9.81×2 = 19.6 kPa.

Key Points

  • Static pressure acts normal to a surface.

  • Pressure increases with depth in a constant-density fluid.

  • Gauge and absolute pressure have different references.

  • Manometers use liquid-column differences.

  • Aircraft pressure sensing requires careful port design and calibration.

Applications

  • Pitot-static air-data systems

  • Hydraulic and fuel-system instrumentation

  • Pressure-vessel testing

  • Wind-tunnel pressure measurements

Common Mistakes

  • Calling gauge pressure absolute pressure.

  • Using depth measured upward rather than downward in p = p0 + ρgh.

  • Ignoring the density of the manometer liquid.

Learning Outcomes

  • Describe pressure in a static fluid.

  • Calculate hydrostatic pressure changes.

  • Distinguish common pressure-measurement instruments and references.

Practice Questions

QuestionAnswer

What is the gauge pressure 2 m below water, using ρ = 1000 kg/m³?

Approximately 19.6 kPa.

What does a barometer measure?

Atmospheric pressure.

Related Concepts

  • Atmospheric Pressure and Hydrostatic Equilibrium

  • Properties of Fluids

  • Fluid Kinematics

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Standard fluid mechanics and aircraft instrumentation references.

Suggest a correction or source · More in Aerospace Engineering