✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-041

Conservation of Mass in Fluid Mechanics

Mass conservation states that mass cannot be created or destroyed in ordinary fluid flow; accumulation equals inflow minus outflow.

General continuity: ∂ρ/∂t + ∇·(ρV) = 0; steady one-dimensional flow: ṁ = ρAV = constant

Explanation

The continuity principle is the conservation of mass applied to a fluid. For a control volume, the rate of mass accumulation inside equals the mass inflow minus the mass outflow, with all openings included. In steady flow, there is no accumulation, so total mass flow rate entering equals total mass flow rate leaving. For one-dimensional flow through a duct with nearly uniform properties at each section, mass flow rate is ṁ = ρAV. If density is constant, the relation reduces to the familiar volume-flow relation A₁V₁ = A₂V₂. For compressible air, density changes and the full mass-flow form must be retained. In a nozzle, area reduction often increases speed in subsonic flow, but compressible-flow behaviour depends on Mach number and can reverse in supersonic flow. The continuity equation is therefore fundamental to inlets, nozzles, diffusers, ducts and turbomachinery.

Variables

SymbolMeaning

ρ

Fluid density

V

Velocity normal to the flow area

A

Cross-sectional flow area

ṁ

Mass flow rate

t

Time

Example or application

Air with ρ = 1.2 kg/m³ moving at 20 m/s through A = 0.5 m² has mass flow rate ṁ = 1.2×20×0.5 = 12 kg/s.

Key Points

  • Mass is conserved in ordinary fluid flow.

  • Accumulation equals inflow minus outflow.

  • Steady flow has zero mass accumulation in the control volume.

  • Density must be retained for compressible flow.

  • Area-velocity trends depend on compressibility and Mach number.

Applications

  • Nozzle and diffuser sizing

  • Jet-engine mass-flow calculations

  • Air-intake and ventilation design

  • Fuel and oxidizer feed-system analysis

Common Mistakes

  • Using A₁V₁ = A₂V₂ for compressible flow without justification.

  • Ignoring an inlet, bleed flow or leakage path.

  • Confusing volume flow rate with mass flow rate.

Learning Outcomes

  • Write the continuity equation in differential and control-volume forms.

  • Calculate one-dimensional mass flow rate.

  • Explain why density changes matter in compressible flow.

Practice Questions

QuestionAnswer

What is the mass flow rate for ρ = 1.2 kg/m³, A = 0.5 m² and V = 20 m/s?

12 kg/s.

When is A₁V₁ = A₂V₂ valid?

For steady one-dimensional flow with constant density and no mass addition or removal.

Related Concepts

  • Control Volume and Control Mass Analysis

  • Ideal Gas Law for Atmospheric Applications

  • Compressible and Incompressible Flow

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Standard fluid mechanics and compressible-flow textbooks.

Suggest a correction or source · More in Aerospace Engineering