An airfoil is the cross-sectional shape of a wing or other lifting surface, viewed in a plane parallel to the direction of flight. Its geometry is described using several standard terms. The leading edge is the forward-most point, while the trailing edge is the rear-most point. The chord line connects these two points, and the chord length is the straight-line distance between them. The mean camber line represents points midway between the upper and lower surfaces, measured perpendicular to the chord line. Maximum thickness is the greatest distance between the upper and lower surfaces, while maximum camber is the greatest distance between the mean camber line and the chord line. These geometric properties influence lift, drag, stall behavior, and structural design.
Airfoil Geometry and Nomenclature
Airfoil geometry describes the shape of a wing cross-section and defines the dimensions used in aerodynamic analysis.
Thickness ratio = t/c; Camber ratio = f/c
Explanation
Variables
| Symbol | Meaning |
|---|---|
t | Maximum airfoil thickness (m) |
c | Chord length (m) |
f | Maximum camber (m) |
Example or application
An airfoil with a chord length of 1 m and a maximum thickness of 0.12 m has a thickness ratio of 0.12, or 12%.
Key Points
The leading edge and trailing edge define the chord line.
Chord length is a fundamental airfoil reference dimension.
The mean camber line describes the airfoil's curvature.
Thickness and camber ratios are commonly used in airfoil comparison.
Airfoil geometry affects aerodynamic and structural performance.
Applications
Wing design
Airfoil selection
Wind-tunnel model construction
Aircraft performance analysis
Computational airfoil modeling
Common Mistakes
Confusing the chord line with the mean camber line.
Measuring thickness along an unrelated direction.
Confusing chord length with wing span.
Assuming every airfoil has nonzero camber.
Learning Outcomes
Identify the leading and trailing edges.
Define chord length and chord line.
Explain maximum camber and thickness.
Calculate basic airfoil geometric ratios.
Practice Questions
| Question | Answer |
|---|---|
What is the chord length of an airfoil? | The straight-line distance between the leading edge and trailing edge. |
What does thickness ratio represent? | Maximum airfoil thickness divided by chord length. |
Related Concepts
Camber and Thickness Distribution
Symmetrical and Cambered Airfoils
Angle of Attack and Aerodynamic Response
Airfoil Lift and Drag Coefficients
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Standard airfoil geometry and aerodynamic design terminology.
Suggest a correction or source · More in Aerospace Engineering