✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-065

Angle of Attack and Aerodynamic Response

Angle of attack is the angle between an airfoil's chord line and the oncoming airflow direction.

Cₗ ≈ a₀(α - αₗ₌₀)

Explanation

The angle of attack is the angle between an airfoil's chord line and the relative freestream airflow. It is one of the most important variables affecting lift and drag. For many airfoils at low angles of attack, lift increases approximately linearly as the angle of attack increases. This behavior continues only over a limited operating range. At higher angles, the boundary layer may separate more strongly, causing a reduction in lift growth and eventually stall. The relationship between angle of attack and aerodynamic response also depends on airfoil shape, Reynolds number, Mach number, and surface condition. Engineers use lift and drag curves to determine suitable operating angles for aircraft wings and control surfaces.

Variables

SymbolMeaning

Cₗ

Lift coefficient

a₀

Lift-curve slope per radian

α

Geometric angle of attack

αₗ₌₀

Zero-lift angle of attack

Example or application

Increasing an airfoil's angle of attack from a small positive value generally increases lift until the airfoil approaches its stall condition.

Key Points

  • Angle of attack is measured relative to the incoming airflow.

  • Lift generally increases with angle of attack over a limited range.

  • The lift relationship is approximately linear before stall for many airfoils.

  • Large angles can cause flow separation and stall.

  • Airfoil geometry and flow conditions affect the response.

Applications

  • Aircraft pitch and lift control

  • Airfoil testing

  • Flight performance calculations

  • Stall-warning system design

Common Mistakes

  • Measuring angle of attack relative to the horizon instead of the relative airflow.

  • Assuming lift increases indefinitely with angle of attack.

  • Confusing angle of attack with aircraft pitch attitude.

  • Ignoring the influence of flow separation.

Learning Outcomes

  • Define angle of attack.

  • Explain how lift changes with angle of attack.

  • Identify the limits of the linear lift relationship.

  • Describe how stall affects aerodynamic response.

Practice Questions

QuestionAnswer

Between which two directions is angle of attack measured?

Between the airfoil chord line and the relative freestream airflow.

What can happen when angle of attack becomes too large?

Flow separation can increase and the airfoil may stall.

Related Concepts

  • Symmetrical and Cambered Airfoils

  • Airfoil Stall and Maximum Lift

  • Airfoil Lift and Drag Coefficients

  • Pressure Distribution Around Bodies

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Standard airfoil aerodynamics and lift-curve theory.

Suggest a correction or source · More in Aerospace Engineering