✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-106

Horizontal Stabilizer Design

The horizontal stabilizer is a tail surface that contributes to longitudinal stability and pitch control.

Horizontal tail volume coefficient: V_H = (S_H l_H) / (S c̄).

Explanation

The horizontal stabilizer is an aerodynamic surface usually positioned at the rear of a conventional aircraft. Its main function is to contribute to longitudinal stability, which concerns the aircraft's response to changes in pitch attitude and angle of attack. In many conventional aircraft, the horizontal stabilizer produces a downward aerodynamic force during normal trimmed flight. This force helps balance the pitching moment created by the wing, fuselage, and other components. Some aircraft use stabilizer arrangements or flight conditions that produce different force directions. The horizontal stabilizer commonly includes a movable elevator that allows the pilot or flight-control system to command pitch changes. Its design depends on tail volume, distance from the center of gravity, aerodynamic characteristics, aircraft speed, and stability requirements. Important parameters include stabilizer area, aspect ratio, sweep, airfoil section, and incidence angle. Some aircraft use an all-moving tailplane, called a stabilator, instead of a fixed stabilizer with a separate elevator. The structure must withstand aerodynamic loads, vibration, and control-system forces. Correct horizontal-tail sizing is essential for acceptable trim, stability, and controllability throughout the aircraft's operating envelope.

Variables

SymbolMeaning

V_H

Horizontal tail volume coefficient

S_H

Horizontal stabilizer reference area

l_H

Distance from the aircraft center of gravity to the horizontal-tail aerodynamic center

S

Wing reference area

c̄

Mean aerodynamic chord of the wing

Example or application

A conventional passenger aircraft uses a horizontal stabilizer with elevators to provide longitudinal stability and control during climb, cruise, descent, and landing.

Key Points

  • The horizontal stabilizer contributes to longitudinal stability.

  • It is commonly located at the rear of conventional aircraft.

  • The elevator provides pitch-control authority.

  • Tail size and moment arm influence stabilizing effectiveness.

  • A stabilator is an all-moving horizontal tail surface.

Applications

  • Conventional tail design

  • Aircraft stability analysis

  • Pitch-control system development

  • Aircraft trim calculations

Common Mistakes

  • Assuming the horizontal stabilizer always produces upward lift.

  • Confusing the stabilizer with the elevator.

  • Ignoring the effect of center-of-gravity position.

  • Assuming a larger tail automatically provides better overall aircraft performance.

Learning Outcomes

  • Explain the purpose of a horizontal stabilizer.

  • Differentiate a stabilizer from an elevator.

  • Describe the relationship between tail area and tail moment arm.

  • Understand the role of the horizontal tail in longitudinal stability.

Practice Questions

QuestionAnswer

Which type of stability is mainly associated with the horizontal stabilizer?

Longitudinal stability.

What is the function of an elevator?

It changes the aircraft's pitching moment to control pitch attitude.

Related Concepts

  • Vertical Stabilizer Design

  • Empennage Configurations

  • Elevators and Pitch Control

  • Aircraft Longitudinal Stability

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Aircraft stability, control, and tail design principles.

Suggest a correction or source · More in Aerospace Engineering