✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-116

Flaps and Lift Augmentation

Flaps are movable wing devices that increase lift, often with an accompanying increase in drag, to improve low-speed aircraft performance.

Lift: L = ½ρV²S C_L.

Explanation

Flaps are high-lift devices installed along part of the trailing edge of an aircraft wing. When deployed, they change the wing's effective camber and sometimes its effective area, allowing it to generate more lift at a given airspeed. This enables aircraft to operate at lower speeds during takeoff and landing. Common flap types include plain, split, slotted, and Fowler flaps. Plain flaps rotate downward to increase camber. Split flaps deflect a lower surface while leaving the upper surface relatively unchanged. Slotted flaps create a gap that allows higher-energy air to flow toward the upper surface, helping delay flow separation. Fowler flaps move rearward and downward, increasing both camber and wing area. Flap deployment generally increases drag as well as lift, which can help during approach and landing. The additional aerodynamic loads require strong hinges, tracks, actuators, and supporting wing structures. Flaps are often operated through hydraulic or electrical systems and must be coordinated with other flight-control and warning systems. Their deployment limits depend on aircraft speed and configuration.

Variables

SymbolMeaning

L

Aerodynamic lift

ρ

Air density

V

Airspeed

S

Wing reference area

C_L

Lift coefficient, which changes with flap configuration

Example or application

A passenger airplane deploys trailing-edge flaps during landing to increase lift at low speed and provide additional drag for a controlled approach.

Key Points

  • Flaps are commonly installed along the wing trailing edge.

  • They increase wing camber and sometimes effective wing area.

  • Flaps increase maximum lift and usually increase drag.

  • Plain, split, slotted, and Fowler flaps are common types.

  • Flap operation is limited by structural and aerodynamic requirements.

Applications

  • Aircraft takeoff performance

  • Landing-speed reduction

  • Short-runway aircraft design

  • High-lift system development

Common Mistakes

  • Assuming flap deployment increases lift without changing drag.

  • Confusing trailing-edge flaps with leading-edge slats.

  • Assuming all flap types increase wing area.

  • Ignoring aircraft speed limitations during flap operation.

Learning Outcomes

  • Explain how flaps increase lift.

  • Identify common flap configurations.

  • Describe the aerodynamic effects of flap deployment.

  • Explain why flaps are useful during takeoff and landing.

Practice Questions

QuestionAnswer

What is the main purpose of aircraft flaps?

To increase lift at lower speeds, especially during takeoff and landing.

Which flap type moves rearward as well as downward?

The Fowler flap.

Related Concepts

  • Slats and Leading-Edge Devices

  • High-Lift Aerodynamic Devices

  • Aircraft Control Surface Architecture

  • Landing Gear Design

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Aircraft high-lift system and aerodynamic design principles.

Suggest a correction or source · More in Aerospace Engineering