Load factor describes the ratio of the aerodynamic force supporting or loading an aircraft to its weight. It is commonly expressed in multiples of gravitational acceleration and represented by the symbol n. In a steady, straight, level flight condition, the load factor is approximately one because lift balances weight. During a level turn, the aircraft must generate additional lift because only the vertical component of lift supports its weight. This causes load factor to increase with bank angle. Load factor also changes during pull-ups, pushovers, turbulence encounters, and other maneuvers. Positive load factors generally correspond to loading that pushes the occupants toward the aircraft floor, while negative load factors correspond to the opposite loading direction. Aircraft structures are designed to withstand specified limit loads and ultimate loads according to applicable certification requirements. Exceeding structural limits can cause damage or failure, while repeated loading can contribute to fatigue. Load factor also influences stall speed because a higher load factor requires a greater lift coefficient or airspeed to maintain flight. Engineers and pilots therefore consider load factor when evaluating maneuvering capability, structural safety, and aircraft operating limitations.
Load Factor and Aircraft Maneuvering
Load factor measures the aerodynamic load acting on an aircraft relative to its weight and is important for maneuvering and structural design.
Load factor: n = L / W; in a coordinated level turn: n = 1 / cos φ.
Explanation
Variables
| Symbol | Meaning |
|---|---|
n | Load factor, commonly expressed in g units |
L | Aerodynamic lift or normal aerodynamic force in the simplified condition |
W | Aircraft weight |
φ | Bank angle in a coordinated level turn |
Example or application
In a coordinated level turn with a bank angle of 60 degrees, the simplified load factor is 1 / cos 60° = 2, meaning the aerodynamic lift is twice the aircraft weight.
Key Points
Load factor compares aerodynamic loading with aircraft weight.
Straight, level, unaccelerated flight has approximately one-g load factor.
Load factor increases with bank angle in a coordinated level turn.
Maneuvers and turbulence can create positive or negative load factors.
Aircraft structures have defined limit and ultimate load requirements.
Higher load factor increases stall speed.
Applications
Aircraft structural design
Maneuvering performance analysis
Aircraft certification
Stall-speed prediction
Flight-envelope development
Common Mistakes
Confusing load factor with aircraft mass.
Assuming load factor is always one during flight.
Ignoring the relationship between bank angle and load factor.
Assuming aircraft structural limits can be exceeded without consequences.
Learning Outcomes
Define aircraft load factor.
Explain how maneuvering changes load factor.
Calculate load factor for a simplified coordinated level turn.
Describe the relationship between load factor, structural limits, and stall speed.
Practice Questions
| Question | Answer |
|---|---|
What is the approximate load factor in straight, level, unaccelerated flight? | One g, or n = 1. |
What is the load factor in a coordinated level turn at a 60-degree bank angle? | n = 1 / cos 60° = 2. |
How does load factor affect stall speed? | Higher load factor increases the lift required and therefore increases stall speed. |
Related Concepts
Turning Flight and Coordinated Turns
Aircraft Stall Speed
Flight Envelope and V–n Diagram
Aircraft Structural Loads
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Aircraft structural loads, maneuvering performance, and flight-envelope principles.
Suggest a correction or source · More in Aerospace Engineering